Heat Recovery Systems and CHP, 1359-4311

Journal

More filtering options
  1. 2018
  2. Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine

    Sam Shamun, Belgiorno, G., Di Blasio, G., Beatrice, C., Martin Tunér & Per Tunestål, 2018 Dec 25, In : Applied Thermal Engineering. 145, p. 444-452 9 p.

    Research output: Contribution to journalArticle

  3. Start of low temperature reactions detection based on motoring pressure prediction for partially premixed combustion

    Cheng Fang, Ouyang, M., Lianhao Yin, Per Tunestal, Yang, F. & Yang, X., 2018 Aug 1, In : Applied Thermal Engineering. 141, p. 1101-1109 9 p.

    Research output: Contribution to journalArticle

  4. Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel

    Luo, L., Chen, Q., Du, W., Wang, S., Bengt Sundén & Zhang, X., 2018 Jul 25, In : Applied Thermal Engineering. 140, p. 166-179 14 p.

    Research output: Contribution to journalArticle

  5. Effects of the position of a bluff-body on the diffusion flames: A combined experimental and numerical study

    Tong, Y., Liu, X., Chen, S., Zhongshan Li & Jens Klingmann, 2018 Feb 25, In : Applied Thermal Engineering. 131, p. 507-521 15 p.

    Research output: Contribution to journalArticle

  6. Influence of spatial and temporal distribution of Turbulent Kinetic Energy on heat transfer coefficient in a light duty CI engine operating with Partially Premixed Combustion

    Tanov, S., Pachano, L., Öivind Andersson, Zhenkan Wang, Mattias Richter, Pastor, J. V., García-Oliver, J. M. & García, A., 2018 Jan 25, In : Applied Thermal Engineering. 129, p. 31-40 10 p.

    Research output: Contribution to journalArticle

  7. The feasibility of mode control in rotating detonation engine

    Deng, Y-L., Ma, H., Xu, C., Liu, X. & Zhou, C., 2018 Jan 25, In : Applied Thermal Engineering. 129, p. 1538-1550 13 p.

    Research output: Contribution to journalArticle

  8. Parametric analysis on throttling components of multi-stage high pressure reducing valve

    Hou, C. W., Qian, J. Y., Chen, F. Q., Jiang, W. K. & Jin, Z., 2018 Jan 5, In : Applied Thermal Engineering. 128, p. 1238-1248 11 p.

    Research output: Contribution to journalArticle

  9. 2017
  10. Computational optimization of counter-flow double-layered microchannel heat sinks subjected to thermal resistance and pumping power

    Shen, H-M., Jin, X., Zhang, F., Xie, G., Bengt Sunden & Yan, H., 2017 Jul 5, In : Applied Thermal Engineering. 121, p. 180-189 10 p.

    Research output: Contribution to journalArticle

  11. Influence of the upstream slot geometry on the endwall cooling and phantom cooling of vane suction side surface

    Kun Du, Li, Z., Li, J. & Bengt Sunden, 2017 Jul 5, In : Applied Thermal Engineering. 121, p. 688-700 13 p.

    Research output: Contribution to journalArticle

  12. Flow pattern and heat transfer past two tandem arranged cylinders with oscillating inlet velocity

    Jian Liu, Xie, G. & Bengt Sundén, 2017 Jun 25, In : Applied Thermal Engineering. 120, p. 614-625 12 p.

    Research output: Contribution to journalArticle

  13. A novel optimization framework for designing multi-stream compact heat exchangers and associated network

    Wang, Z., Bengt Sundén & Li, Y., 2017 Apr 1, In : Applied Thermal Engineering. 116, p. 110-125 16 p.

    Research output: Contribution to journalArticle

  14. On the solar receiver thermal enhancement by using the dimple combined with delta winglet vortex generator

    Lei, L., Wen, F., Lei Wang, Bengt Sundén & Wang, S., 2017 Jan 25, In : Applied Thermal Engineering. 111, p. 586-598 13 p.

    Research output: Contribution to journalArticle

  15. 2016
  16. Investigation on thermal and thermomechanical performances of actively cooled corrugated sandwich structures

    Xie, G., Wang, C., Ji, T. & Bengt Sunden, 2016 Jun 25, In : Applied Thermal Engineering. 103, p. 660-669 10 p.

    Research output: Contribution to journalArticle

  17. 2015
  18. A comparative study of different burning time models for the combustion of aluminum dust particles

    Bidabadi, M., Poorfar, A. K., Wang, S. & Bengt Sundén, 2015 May 25, In : Applied Thermal Engineering. 105, p. 474–482

    Research output: Contribution to journalArticle

  19. Heat transfer and pressure drop in a smooth and ribbed turn region of a two-pass channel

    Wang, C., Lei Wang & Bengt Sundén, 2015, In : Applied Thermal Engineering. 85, p. 225-233

    Research output: Contribution to journalArticle

  20. Influence of phase change on self-pressurization in cryogenic tanks under microgravity

    Fu, J., Bengt Sundén, Chen, X. & Huang, Y., 2015, In : Applied Thermal Engineering. 87, p. 225-233

    Research output: Contribution to journalArticle

  21. 2014
  22. Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

    Xie, G., Zhang, F., Bengt Sundén & Zhang, W., 2014, In : Applied Thermal Engineering. 62, 2, p. 791-802

    Research output: Contribution to journalArticle

  23. Economic optimization design of shell-and-tube heat exchangers by a cuckoo-search-algorithm

    Asadi, M., Song, Y., Bengt Sundén & Xie, G., 2014, In : Applied Thermal Engineering. 73, 1, p. 1032-1040

    Research output: Contribution to journalArticle

  24. Influence of wall ribs on the thermal stratification and self-pressurization in a cryogenic liquid tank

    Fu, J., Bengt Sundén & Chen, X., 2014, In : Applied Thermal Engineering. 73, 2, p. 1421-1431

    Research output: Contribution to journalArticle

  25. Laminar thermal performance of microchannel heat sinks with constructal vertical Y-shaped bifurcation plates

    Li, Y., Zhang, F., Bengt Sundén & Xie, G., 2014, In : Applied Thermal Engineering. 73, 1, p. 185-195

    Research output: Contribution to journalArticle

  26. Preface: Special Issue for the 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control (IWHT2013)

    Wang, Q-W., Bengt Sundén, Chen, Y., Guo, Z. & Stehlik, P., 2014, In : Applied Thermal Engineering. 73, 2, p. 1401-1401

    Research output: Contribution to journalDebate/Note/Editorial

  27. 2013
  28. A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs

    Xie, G., Zheng, S., Zhang, W. & Bengt Sundén, 2013, In : Applied Thermal Engineering. 61, 2, p. 289-300

    Research output: Contribution to journalArticle

  29. A performance analysis of porous graphite foam heat exchangers in vehicles

    Lin, W., Bengt Sundén & Yuan, J., 2013, In : Applied Thermal Engineering. 50, 1, p. 1201-1210

    Research output: Contribution to journalArticle

  30. Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger

    Zeng, M., Ma, T., Bengt Sundén, Trabia, M. B. & Wang, Q., 2013, In : Applied Thermal Engineering. 50, 1, p. 886-895

    Research output: Contribution to journalArticle

  31. Thermomechanical optimization of lightweight thermal protection system under aerodynamic heating

    Xie, G., Wang, Q., Bengt Sundén & Zhang, W., 2013, In : Applied Thermal Engineering. 59, 1-2, p. 425-434

    Research output: Contribution to journalArticle

  32. 2010
  33. CFD-modelling of natural convection in a groundwater-filled borehole heat exchanger

    Gustafsson, A. -M., Westerlund, L. & Göran Hellström, 2010, In : Applied Thermal Engineering. 30, 6-7, p. 683-691

    Research output: Contribution to journalArticle

  34. 2009
  35. 2008
  36. Optimization of Compact Heat Exchangers by a Genetic Algorithm

    Xie, G., Bengt Sundén & Wang, Q., 2008, In : Applied Thermal Engineering. 28, 8-9, p. 895-906

    Research output: Contribution to journalArticle

  37. 2006
  38. An experimental investigation of the port flow maldistribution in small and large plate package heat exchangers

    Bobbili, P. R., Bengt Sundén & Das, S. K., 2006, In : Applied Thermal Engineering. 26, 16, p. 1919-1926

    Research output: Contribution to journalArticle

  39. 2004
  40. Chemiluminescence sensor for local equivalence ratio of reacting mixtures of fuel and air (FLAMESEEK)

    Hardalupas, Y., Orain, M., Panoutsos, CS., Taylor, AMKP., Olofsson, J., Seyfried, H., Mattias Richter, Hult, J., Marcus Aldén, Hermann, F. & Jens Klingmann, 2004, In : Applied Thermal Engineering. 24, 11-12, p. 1619-1632

    Research output: Contribution to journalArticle

  41. 2003
  42. Optimal design of plate heat exchangers with and without pressure drop specifications

    Wang, L. & Bengt Sundén, 2003, In : Applied Thermal Engineering. 23, 3, p. 295-311

    Research output: Contribution to journalArticle