Chemical Engineering Science, 0009-2509

Journal

More filtering options
  1. 2018
  2. Single droplet breakup in a rotor-stator mixer

    Ashar, M., Arlov, D., Carlsson, F., Fredrik Innings & Andersson, R. 2018 May 18 In : Chemical Engineering Science. 181, p. 186-198 13 p.

    Research output: Contribution to journalArticle

  3. A validation of commonly used CFD methods applied to rotor stator mixers using PIV measurements of fluid velocity and turbulence

    Mortensen, H. H., Arlov, D., Fredrik Innings & Håkansson, A. 2018 Feb 23 In : Chemical Engineering Science. 177, p. 340-353 14 p.

    Research output: Contribution to journalArticle

  4. 2017
  5. Experimental investigations of turbulent fragmenting stresses in a rotor-stator mixer. Part 2. Probability distributions of instantaneous stresses

    Håkansson, A., Andersson, R., Mortensen, H. H. & Fredrik Innings 2017 Nov In : Chemical Engineering Science. 171, p. 638-649

    Research output: Contribution to journalArticle

  6. 2014
  7. Dynamic parameter estimation of atomic layer deposition kinetics applied to in situ quartz crystal microbalance diagnostics

    Holmqvist, A., Törndahl, T., Magnusson, F., Zimmermann, U. & Stig Stenström 2014 In : Chemical Engineering Science. 111, p. 15-33

    Research output: Contribution to journalArticle

  8. Scale-up Analysis of Continuous Cross-flow Atomic Layer Deposition Reactor Designs

    Holmqvist, A., Magnusson, F. & Stig Stenström 2014 In : Chemical Engineering Science. 117, p. 301-317

    Research output: Contribution to journalArticle

  9. 2013
  10. A high-pressure homogenization emulsification model—Improved emulsifier transport and hydrodynamic coupling

    Håkansson, A., Fredrik, I., Trägårdh, C. & Björn Bergenståhl 2013 In : Chemical Engineering Science. 91, p. 44-53

    Research output: Contribution to journalArticle

  11. 2012
  12. Estimation of turbulent fragmenting forces in a high-pressure homogenizer from computational fluid dynamics

    Håkansson, A., Innings, F., Johan Revstedt, Trägårdh, C. & Björn Bergenståhl 2012 In : Chemical Engineering Science. 75, p. 309-317

    Research output: Contribution to journalArticle

  13. Experimental validation of k–ε RANS-CFD on a high-pressure homogenizer valve

    Håkansson, A., Fuchs, L., Johan Revstedt, Trägårdh, C., Björn Bergenståhl & Innings, F. 2012 In : Chemical Engineering Science. 71, p. 264-273

    Research output: Contribution to journalArticle

  14. 2011
  15. 2009
  16. Dynamic simulation of emulsion formation in a high pressure homogenizer

    Håkansson, A., Trägårdh, C. & Björn Bergenståhl 2009 In : Chemical Engineering Science. 64, 12, p. 2915-2925

    Research output: Contribution to journalArticle

  17. Effects of cross-flow velocity, capillary pressure and oil viscosity on oil-in-water drop formation from a capillary

    Timgren, A., Trägårdh, G. & Trägårdh, C. 2009 In : Chemical Engineering Science. 64, 6, p. 1111-1118

    Research output: Contribution to journalArticle

  18. 2008
  19. Steady-state performance of an infinitely fast reaction in a three-dimensional open Stokes flow

    Cerbelli, S., F. Garofalo & Giona, M. 2008 Sep 1 In : Chemical Engineering Science. 63, 17, p. 4396-4411 16 p.

    Research output: Contribution to journalArticle

  20. 2007
  21. Methodology for in-line rheology by ultrasound Doppler velocity profiling and pressure difference techniques

    Wiklund, J., Shahram, I. & Stading, M. 2007 In : Chemical Engineering Science. 62, 16, p. 4277-4293

    Research output: Contribution to journalArticle

  22. 2006
  23. Effects of geometry and flow rate on secondary flow and the mixing process in static mixers - A numerical study

    Regner, M., Östergren, K. & Trägårdh, C. 2006 In : Chemical Engineering Science. 61, 18, p. 6133-6141

    Research output: Contribution to journalArticle

  24. 2005
  25. A new device for coating single particles under controlled conditions

    Strom, D., Karlsson, S., Folestad, S., Bjorn, I. N., Thomas Laurell, Johan Nilsson & Rasmuson, A. 2005 In : Chemical Engineering Science. 60, 16, p. 4647-4653

    Research output: Contribution to journalArticle

  26. Dynamic modelling of the deformation of a drop in a four-roll mill

    Fredrik Innings, Hamberg, L. & Trägårdh, C. 2005 In : Chemical Engineering Science. 60, 17, p. 4771-4779

    Research output: Contribution to journalArticle

  27. 2004
  28. A transient response study of the selective catalytic oxidation of ammonia to nitrogen on Pt/CuO/Al2O3

    Olofsson, G., Hinz, A. & Andersson, A. 2004 In : Chemical Engineering Science. 59, 19, p. 4113-4123

    Research output: Contribution to journalArticle

  29. 2001
  30. Water transport during the drying of cardboard studied by NMR imaging and diffusion techniques

    Harding, S. G., Wessman, D., Stig Stenström & Kenne, L. 2001 In : Chemical Engineering Science. 56, 18, p. 5269-5281

    Research output: Contribution to journalArticle

  31. 2000
  32. Steam drying a bed of porous spheres: Theory and experiment

    Hager, J., Wimmerstedt, R. & Whitaker, S. 2000 In : Chemical Engineering Science. 55, 9, p. 1675-1698

    Research output: Contribution to journalArticle

  33. 1999
  34. Propane ammoxidation on an Al-Sb-V-W-oxide catalyst. A mechanistic study using the TAP-2 reactor system

    Hinz, A. & Andersson, A. 1999 In : Chemical Engineering Science. 54, 20, p. 4407-4421

    Research output: Contribution to journalArticle

  35. 1998
  36. Modeling of high-temperature desulfurization by Ca-based sorbents

    Wang, W. & Bjerle, I. 1998 In : Chemical Engineering Science. 53, 11, p. 1973-1989

    Research output: Contribution to journalArticle

  37. 1997
  38. A general formalism for metabolic control analysis

    Ehlde, M. & Guido Zacchi 1997 In : Chemical Engineering Science. 52, 15, p. 2599-2606

    Research output: Contribution to journalArticle

  39. Modeling the absorption of SO2 in a spray scrubber using the penetration theory

    Brogren, C. & Hans Karlsson 1997 In : Chemical Engineering Science. 52, 18, p. 3085-3099

    Research output: Contribution to journalArticle

  40. Modelling steam drying of a single porous ceramic sphere: Experiments and simulations

    Hager, J., Hermansson, M. & Wimmerstedt, R. 1997 In : Chemical Engineering Science. 52, 8, p. 1253-1264

    Research output: Contribution to journalArticle

  41. 1995
  42. Gas Diffusion Through Sheets of Fibrous Porous Media

    Nilsson, L. & Stig Stenström 1995 In : Chemical Engineering Science. 50, 3, p. 361-371

    Research output: Contribution to journalArticle

  43. 1993
  44. On the modelling of drop behaviour in siphon riser tubes in paper drying cylinders

    Stig Stenström 1993 In : Chemical Engineering Science. 48, 23, p. 4037-4047

    Research output: Contribution to journalArticle

  45. 1991
  46. Application of the diffussion cell for the measurement of diffusion in gels

    Anders Axelsson, Westrin, B. & Loyd, D. 1991 In : Chemical Engineering Science. 46, 3, p. 913-915

    Research output: Contribution to journalLetter

  47. Measurement of diffusion coefficients in gel beads: Random and systematic errors

    Westrin, B. A. & Guido Zacchi 1991 In : Chemical Engineering Science. 46, 8, p. 1911-1916

    Research output: Contribution to journalArticle

  48. 1989
  49. A mass transfer model for limestone dissolution from a rotating cylinder

    Wallin, M. & Bjerle, I. 1989 In : Chemical Engineering Science. 44, 1, p. 61-67

    Research output: Contribution to journalArticle

  50. 1988
  51. Limestone Based Spray Dry Scrubbing of SO2

    STROMBERG, A. M. & Hans Karlsson 1988 In : Chemical Engineering Science. 43, 8, p. 2095-2102

    Research output: Contribution to journalArticle

  52. 1982
  53. Limestone Based wet-Dry Scrubbing to Form Gypsum

    Linne, M., Klingspor, J., Hans Karlsson & Bjerle, I. 1982 In : Chemical Engineering Science. 37, 5, p. 807-807

    Research output: Contribution to journalArticle

  54. 1980
  55. A General Explicit Enhancement Factor for Irreversible Gas-Liquid Reactions with Gas-side Resistance

    Hans Karlsson & Bjerle, I. 1980 In : Chemical Engineering Science. 35, 4, p. 1005-1007

    Research output: Contribution to journalArticle

  56. Application of Chemical and Physical Operations in a Circulating Fluidized Bed System

    Berggren, J. C., Bjerle, I., Eklund, H., Hans Karlsson & Svensson, O. 1980 In : Chemical Engineering Science. 35, 1-2, p. 446-455

    Research output: Contribution to journalArticle

  57. 1974