Chemical Engineering Science, 0009-2509

Tidskrift

Fler filtreringsmöjligheter
  1. 2017
  2. Liquid-liquid flow patterns and slug hydrodynamics in square microchannels of cross-shaped junctions

    Zan Wu, Zhen Cao & Bengt Sundén 2017 dec 31 I : Chemical Engineering Science. 174, s. 56-66 11 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  3. Experimental investigations of turbulent fragmenting stresses in a rotor-stator mixer. Part 2. Probability distributions of instantaneous stresses

    Håkansson, A., Andersson, R., Mortensen, H. H. & Fredrik Innings 2017 jun 23 I : Chemical Engineering Science.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  4. 2014
  5. Dynamic parameter estimation of atomic layer deposition kinetics applied to in situ quartz crystal microbalance diagnostics

    Holmqvist, A., Törndahl, T., Magnusson, F., Zimmermann, U. & Stig Stenström 2014 I : Chemical Engineering Science. 111, s. 15-33

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  6. Scale-up Analysis of Continuous Cross-flow Atomic Layer Deposition Reactor Designs

    Holmqvist, A., Magnusson, F. & Stig Stenström 2014 I : Chemical Engineering Science. 117, s. 301-317

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  7. 2013
  8. A high-pressure homogenization emulsification model—Improved emulsifier transport and hydrodynamic coupling

    Håkansson, A., Fredrik, I., Trägårdh, C. & Björn Bergenståhl 2013 I : Chemical Engineering Science. 91, s. 44-53

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  9. 2012
  10. Estimation of turbulent fragmenting forces in a high-pressure homogenizer from computational fluid dynamics

    Håkansson, A., Innings, F., Johan Revstedt, Trägårdh, C. & Björn Bergenståhl 2012 I : Chemical Engineering Science. 75, s. 309-317

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  11. Experimental validation of k–ε RANS-CFD on a high-pressure homogenizer valve

    Håkansson, A., Fuchs, L., Johan Revstedt, Trägårdh, C., Björn Bergenståhl & Innings, F. 2012 I : Chemical Engineering Science. 71, s. 264-273

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  12. 2011
  13. High resolution experimental measurement of turbulent flow field in a high pressure homogenizer model and its implications on turbulent drop fragmentation

    Håkansson, A., Fuchs, L., Innings, F., Johan Revstedt, Trägårdh, C. & Björn Bergenståhl 2011 I : Chemical Engineering Science. 66, 8, s. 1790-1801

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  14. 2009
  15. Dynamic simulation of emulsion formation in a high pressure homogenizer

    Håkansson, A., Trägårdh, C. & Björn Bergenståhl 2009 I : Chemical Engineering Science. 64, 12, s. 2915-2925

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  16. Effects of cross-flow velocity, capillary pressure and oil viscosity on oil-in-water drop formation from a capillary

    Timgren, A., Trägårdh, G. & Trägårdh, C. 2009 I : Chemical Engineering Science. 64, 6, s. 1111-1118

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  17. 2008
  18. Steady-state performance of an infinitely fast reaction in a three-dimensional open Stokes flow

    Cerbelli, S., F. Garofalo & Giona, M. 2008 sep 1 I : Chemical Engineering Science. 63, 17, s. 4396-4411 16 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  19. 2007
  20. A dynamic object-oriented model for efficient simulation of fluid dispersion in turbulent flow with varying fluid properties

    Skoglund, T. & Petr Dejmek 2007 I : Chemical Engineering Science. 62, 8, s. 2168-2178

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  21. Estimation of the batch-settling flux function for an ideal suspension from only two experiments

    Stefan Diehl 2007 I : Chemical Engineering Science. 62, s. 4589-4601

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  22. Methodology for in-line rheology by ultrasound Doppler velocity profiling and pressure difference techniques

    Wiklund, J., Shahram, I. & Stading, M. 2007 I : Chemical Engineering Science. 62, 16, s. 4277-4293

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  23. 2006
  24. Effects of geometry and flow rate on secondary flow and the mixing process in static mixers - A numerical study

    Regner, M., Östergren, K. & Trägårdh, C. 2006 I : Chemical Engineering Science. 61, 18, s. 6133-6141

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  25. 2005
  26. A new device for coating single particles under controlled conditions

    Strom, D., Karlsson, S., Folestad, S., Bjorn, I. N., Thomas Laurell, Johan Nilsson & Rasmuson, A. 2005 I : Chemical Engineering Science. 60, 16, s. 4647-4653

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  27. Dynamic modelling of the deformation of a drop in a four-roll mill

    Fredrik Innings, Hamberg, L. & Trägårdh, C. 2005 I : Chemical Engineering Science. 60, 17, s. 4771-4779

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  28. 2004
  29. A transient response study of the selective catalytic oxidation of ammonia to nitrogen on Pt/CuO/Al2O3

    Olofsson, G., Hinz, A. & Andersson, A. 2004 I : Chemical Engineering Science. 59, 19, s. 4113-4123

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  30. 2001
  31. Water transport during the drying of cardboard studied by NMR imaging and diffusion techniques

    Harding, S. G., Wessman, D., Stig Stenström & Kenne, L. 2001 I : Chemical Engineering Science. 56, 18, s. 5269-5281

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  32. 2000
  33. Simulation of transients in heterogeneous catalysis: a comparison of the step- and pulse-transient techniques for the study of hydrocarbon oxidation on metal oxide catalysts

    Hinz, A., Nilsson, B. & Andersson, A. 2000 I : Chemical Engineering Science. 55, 20, s. 4385-4397

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  34. Steam drying a bed of porous spheres: Theory and experiment

    Hager, J., Wimmerstedt, R. & Whitaker, S. 2000 I : Chemical Engineering Science. 55, 9, s. 1675-1698

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  35. 1999
  36. Propane ammoxidation on an Al-Sb-V-W-oxide catalyst. A mechanistic study using the TAP-2 reactor system

    Hinz, A. & Andersson, A. 1999 I : Chemical Engineering Science. 54, 20, s. 4407-4421

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  37. Selective catalytic reduction of NOx: a mathematical model for poison accumulation and conversion performance

    Khodayari, R. & Ingemar Odenbrand 1999 I : Chemical Engineering Science. 54, 12, s. 1775-1785

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  38. 1998
  39. Modeling of high-temperature desulfurization by Ca-based sorbents

    Wang, W. & Bjerle, I. 1998 I : Chemical Engineering Science. 53, 11, s. 1973-1989

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  40. 1997
  41. A general formalism for metabolic control analysis

    Ehlde, M. & Guido Zacchi 1997 I : Chemical Engineering Science. 52, 15, s. 2599-2606

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  42. Modeling the absorption of SO2 in a spray scrubber using the penetration theory

    Brogren, C. & Hans Karlsson 1997 I : Chemical Engineering Science. 52, 18, s. 3085-3099

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  43. Modelling steam drying of a single porous ceramic sphere: Experiments and simulations

    Hager, J., Hermansson, M. & Wimmerstedt, R. 1997 I : Chemical Engineering Science. 52, 8, s. 1253-1264

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  44. The impact of the electrical potential gradient on limestone dissolution under wet flue gas desulfurization conditions

    Brogren, C. & Hans Karlsson 1997 I : Chemical Engineering Science. 52, 18, s. 3101-3106

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  45. 1995
  46. Gas Diffusion Through Sheets of Fibrous Porous Media

    Nilsson, L. & Stig Stenström 1995 I : Chemical Engineering Science. 50, 3, s. 361-371

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  47. 1993
  48. On the modelling of drop behaviour in siphon riser tubes in paper drying cylinders

    Stig Stenström 1993 I : Chemical Engineering Science. 48, 23, s. 4037-4047

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  49. 1991
  50. Application of the diffussion cell for the measurement of diffusion in gels

    Anders Axelsson, Westrin, B. & Loyd, D. 1991 I : Chemical Engineering Science. 46, 3, s. 913-915

    Forskningsoutput: TidskriftsbidragLetter

  51. Measurement of diffusion coefficients in gel beads: Random and systematic errors

    Westrin, B. A. & Guido Zacchi 1991 I : Chemical Engineering Science. 46, 8, s. 1911-1916

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  52. 1989
  53. A mass transfer model for limestone dissolution from a rotating cylinder

    Wallin, M. & Bjerle, I. 1989 I : Chemical Engineering Science. 44, 1, s. 61-67

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  54. 1988
  55. Limestone Based Spray Dry Scrubbing of SO2

    STROMBERG, A. M. & Hans Karlsson 1988 I : Chemical Engineering Science. 43, 8, s. 2095-2102

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  56. 1982
  57. Limestone Based wet-Dry Scrubbing to Form Gypsum

    Linne, M., Klingspor, J., Hans Karlsson & Bjerle, I. 1982 I : Chemical Engineering Science. 37, 5, s. 807-807

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  58. 1980
  59. A General Explicit Enhancement Factor for Irreversible Gas-Liquid Reactions with Gas-side Resistance

    Hans Karlsson & Bjerle, I. 1980 I : Chemical Engineering Science. 35, 4, s. 1005-1007

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  60. Application of Chemical and Physical Operations in a Circulating Fluidized Bed System

    Berggren, J. C., Bjerle, I., Eklund, H., Hans Karlsson & Svensson, O. 1980 I : Chemical Engineering Science. 35, 1-2, s. 446-455

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  61. 1974