Thermal Power Engineering

2023

STUDY OF THE VARIATION IN COMPONENT LEVEL CHARACTERISTICS OF A CENTRIFUGAL COMPRESSOR ACROSS THE COMPRESSOR MAP USING CFD AND EXPERIMENTS WITH DETAILED INSTRUMENTATION ON A GAS STAND

Thiyagarajan, J., Genrup, M., Fredriksson, C., Anton, N. & Fridh, J., 2023, Microturbines, Turbochargers, and Small Turbomachines; Oil and Gas Applications. American Society Of Mechanical Engineers (ASME), v009t18a010. (Proceedings of the ASME Turbo Expo; vol. 9).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2022

Analysis and Development of Integrated Low-Pressure Shaft Generator

Reinap, A., Genrup, M., Avellán, R. & Mårtensson, H., 2022, 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022. International Council of the Aeronautical Sciences, p. 5956-5972 17 p. (33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022; vol. 8).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

MULTIDISCIPLINARY ASSESSMENT OF A YEAR 2035 TURBOFAN PROPULSION SYSTEM

Grönstedt, T., Xisto, C., Zhao, X., Jonsson, I., Reinap, A., Genrup, M., Glodic, N., Salas, M. G., Lejon, M., Avellán, R. & Mårtensson, H., 2022, 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022. International Council of the Aeronautical Sciences, p. 4981-4990 10 p. (33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022; vol. 7).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

NUMERICAL ANALYSIS OF AN AXIAL HIGH PRESSURE PARTIAL ADMISSION TURBINE

Hu, H., Askebjer, P., Genrup, M. & Hushmandi, N., 2022, Turbomachinery - Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics. American Society Of Mechanical Engineers (ASME), V10BT30A015. (Proceedings of the ASME Turbo Expo; vol. 10-B).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2018

A machine learning approach to fault detection in district heating substations

Månsson, S., Kallioniemi, P. O. J., Sernhed, K. & Thern, M., 2018, 16th International Symposium on District Heating and Cooling, DHC2018, 9–12 September 2018, Hamburg, Germany. Vol. 149. p. 226-235 10 p. (Energy Procedia).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Auto machine learning for predicting ship fuel consumption

Ahlgren, F. & Thern, M., 2018, ECOS 2018 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. University of Minho

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Axial turbine design for a twin-turbine heavy-duty turbocharger concept

Anton, N., Genrup, M., Fredriksson, C., Larsson, P. I. & Christiansen-Erlandsson, A., 2018, Turbomachinery. American Society Of Mechanical Engineers (ASME), Vol. 2B-2018. GT2018-75453

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

On the choice of turbine type for a twin-turbine heavy-duty turbocharger concept

Anton, N., Genrup, M., Fredriksson, C., Larsson, P. I. & Christiansen-Erlandsson, A., 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines. American Society Of Mechanical Engineers (ASME), Vol. 8. GT2018-75452

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Performance of a Semi-Closed Oxy-Fuel Combustion Combined Cycle (scoc-cc) with an Air Separation Unit (ASU)

Sammak, M., Thern, M. & Genrup, M., 2018, Coal, Biomass, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems. American Society Of Mechanical Engineers (ASME), Vol. 3. GT2018-76218

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Risks and opportunities for bottleneck measures in Swedish district heating networks

Brange, L., Thern, M. & Sernhed, K., 2018, 16th International Symposium on District Heating and Cooling, DHC2018, 9–12 September 2018, Hamburg, Germany. Vol. 149. p. 380-389 10 p. (Energy Procedia).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

2017

An experimental study of effects of confinement ratio on swirl stabilized flame macrostructures

Tong, Y., Li, M., Thern, M. & Klingmann, J., 2017, Boilers and Heat Recovery Steam Generator; Combustion Turbines; Energy Water Sustainability; Fuels, Combustion and Material Handling; Heat Exchangers, Condensers, Cooling Systems, and Balance-of-Plant. American Society Of Mechanical Engineers (ASME), Vol. 1. V001T04A007

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Effect of spanwise variation of chord on the performance of a turbine cascade

Deshpande, S., Pradeep, A. M., Thern, M. & Genrup, M., 2017, Turbomachinery. American Society Of Mechanical Engineers (ASME), Vol. 2A-2017.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Exhaust volume dependency of turbocharger turbine design for a heavy duty otto cycle engine

Anton, N., Genrup, M., Fredriksson, C., Larsson, P. I. & Erlandsson-Christiansen, A., 2017, Turbomachinery. American Society Of Mechanical Engineers (ASME), Vol. 2C-2017. GT2017-63641

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Experimental investigation of the influence of burner geometry on flame characteristics at a dry low emission industrial prototype burner at atmospheric pressure conditions

Subash, A. A., Collin, R., Aldén, M., Kundu, A. & Klingmann, J., 2017, Combustion, Fuels and Emissions. American Society Of Mechanical Engineers (ASME), Vol. 4A-2017. GT2017-63950

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Experimental investigation on the influences of bluff-body's position on diffusion flame structures

Tong, Y., Li, M., Klingmann, J., Chen, S. & Li, Z., 2017, Boilers and Heat Recovery Steam Generator; Combustion Turbines; Energy Water Sustainability; Fuels, Combustion and Material Handling; Heat Exchangers, Condensers, Cooling Systems, and Balance-of-Plant. American Society Of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Investigation of hydrogen enriched methane flame in a dry low emission Industrial prototype burner at atmospheric pressure conditions

Subash, A. A., Collin, R., Aldén, M., Kundu, A. & Klingmann, J., 2017, Combustion, Fuels and Emissions. American Society Of Mechanical Engineers (ASME), Vol. 4A-2017. GT2017-63924

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Multidisciplinary design of a three stage high speed booster

Lejon, M., Gronstedt, T., Glodic, N., Petrie-Repar, P., Genrup, M. & Mann, A., 2017, Turbomachinery. American Society Of Mechanical Engineers (ASME), Vol. 2B-2017. GT2017-64466

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2016

Experimental and numerical investigation of a prototype low NOx gas turbine burner

Kundu, A., Klingmann, J., Subash, A. A. & Collin, R., 2016, ASME 2016 Power Conference, POWER 2016, collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society Of Mechanical Engineers (ASME), Vol. 2016-January.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Influence of combustor geometry on swirl stabilized premixed methane-air flame

Tong, Y., Li, M. & Klingmann, J., 2016, Proceedings of ASME 2016 Turbo Expo: Turbomachinery Technical Conference and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 4B-2016.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Laser-based investigation on a dry low emission industrial prototype burner at atmospheric pressure conditions

Subash, A. A., Collin, R., Aldén, M., Kundu, A. & Klingmann, J., 2016, Combustion, Fuels and Emissions. American Society Of Mechanical Engineers (ASME), Vol. 4B-2016. GT2016-57242

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2015

Operability and performance of central (Pilot) stage of an industrial prototype burner

Kundu, A., Klingmann, J., Whiddon, R., Subash, A. A. & Collin, R., 2015, ASME 2015 Power Conference: ASME 2015 Power Conference collocated with the ASME 2015 9th International Conference on Energy Sustainability, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum. San Diego: American Society Of Mechanical Engineers (ASME), Vol. 2015. 13 p. POWER2015-49449

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Waste heat recovery in a cruise vessel in the baltic sea by using an organic rankine cycle: A case study

Ahlgren, F., Mondejar, M. E., Genrup, M. & Thern, M., 2015, Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration. American Society Of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2014

Aerodynamic considerations in the thermodynamic analysis of organic Rankine cycles

Mondejar, M., Thern, M. & Genrup, M., 2014, [Host publication title missing]. American Society Of Mechanical Engineers (ASME), Vol. 2. p. V002T09A016

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Operational Improvements for Start-Up Time Reduction in Solar Steam Turbines

Topel, M., Genrup, M., Jocker, M., Spelling, J. & Laumert, B., 2014, Proceedings of the ASME Turbo Expo: Turbine Technical Conference And Exposition, 2014, Vol 5C. Amer. Soc. Mechanical Engineers, p. V05CT20A008

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Oxy-fuel turbine through-flow design

Sammak, M., Deshpande, S. & Genrup, M., 2014, Proceedings of the ASME 2014 Power Conference. American Society Of Mechanical Engineers (ASME), Vol. 2. p. V002T08A002

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Reduction in Secondary Losses in Turbine Cascade Using Contoured Boundary Layer Fence

Deshpande, S., Thern, M. & Genrup, M., 2014, Proceedings of the ASME 2014 Gas Turbine India Conference. American Society Of Mechanical Engineers (ASME), p. GTINDIA2014-8175

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Temporary CO2 capture shut down: Implications on low pressure steam turbine design and efficiency

Thern, M., Jordal, K. & Genrup, M., 2014, 7th Trondheim Conference on Co2 Capture, Transport and Storage (2013). Elsevier, Vol. 51. p. 14-23

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

The influence from the working medium on the profile loss in compressor and turbine airfoils

Dahlquist, A., Thern, M. & Genrup, M., 2014, Proceedings of the ASME Turbo Expo: Turbine Technical Conference And Exposition, 2014, Vol 2C. Amer. Soc. Mechanical Engineers, p. V02CT38A003

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Visualization of Different Flashback Mechanisms for H-2/CH4 Mixtures in a Variable-Swirl Burner

Sayad, P., Schönborn, A., Li, M. & Klingmann, J., 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. Amer. Soc. Mechanical Engineers, Vol. 3A. 12 p. GT2014-27090

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2013

Experimental and Reactor Network Study of Nitrogen Dilution Effects on NOx Formation for Natural Gas and Syngas at Elevated Pressures

Sigfrid, I., Whiddon, R., Collin, R. & Klingmann, J., 2013, Proceedings of ASME Turbo Expo 2013, GT2013-94355. Bonzani, F. (ed.). American Society Of Mechanical Engineers (ASME), Vol. Volume 1A: Combustion, Fuels and Emissions. 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Experimental Evaluation of a Novel High Frequency Ignition System Using a Flow-Reactor Set-up

Dahlström, J., Schönborn, A., Tunestål, P. & Johansson, B., 2013, SAE Technical Paper Series. Society of Automotive Engineers

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Influence of Working Fluid on Gas Turbine Cooling Modeling

Sammak, M., Thern, M. & Genrup, M., 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 2. 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Investigation of a Premixed Gas Turbine Combustor Central Body Burner Using OH Planar Laser Induced Fluorescence at Elevated Pressures

Whiddon, R., Sigfrid, I., Collin, R., Klingmann, J. & Aldén, M., 2013, Proceedings of ASME Turbo Expo 2013, GT2013-94443. American Society Of Mechanical Engineers (ASME), Vol. Volume 1A: Combustion, Fuels and Emissions. 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Reduced-order through-flow design code for highly loaded cooled gas turbines

Sammak, M., Thern, M. & Genrup, M., 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition . American Society Of Mechanical Engineers (ASME), 11 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

2012

A Comparative Analysis of WHR System in HD Engines Using Conventional Diesel Combustion and Partially-Premixed Combustion

Narayanan, P., Nyberg, B., Tunér, M. & Tunestål, P., 2012, SAE Technical Paper Series. Society of Automotive Engineers

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Aerodynamic Analysis of a Humid Air Turbine Expander

Nyberg, B., Thern, M. & Genrup, M., 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 3. p. 217-225 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Conceptual Design of a Mid-Sized Semi-Closed Oxy-Fuel Combustion Combined Cycle

Sammak, M., Jonshagen, K., Thern, M., Genrup, M., Thorbergsson, E., Gronstedt, T. & Dahlquist, A., 2012, Proceedings of the Asme Turbo Expo 2011, Vol 4. American Society Of Mechanical Engineers (ASME), Vol. 4. p. 253-261

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Efficient operation of a gas turbine on methanol using chemical recuperation

Duwig, C., Nyberg, B. & Thern, M., 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 1. p. 615-623 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Experimental Investigations of an Industrial Lean Premixed Gas Turbine Combustor With High Swirling Flow

Sigfrid, I., Whiddon, R., Abou-Taouk, A., Collin, R. & Klingmann, J., 2012, Proceedings of ASME, GTIndia2012-9681. Kumar, S. (ed.). American Society Of Mechanical Engineers (ASME), p. 559-569 11 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Post-Combustion CO2 Capture for Combined Cycles Utilizing Hot-Water Absorbent Regeneration

Jonshagen, K., Sammak, M. & Genrup, M., 2012, Proceedings of the Asme Turbo Expo 2011, Vol 4. American Society Of Mechanical Engineers (ASME), p. 143-151

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Waste Heat Recovery from Multiple Heat Sources in a HD Truck Diesel Engine Using a Rankine Cycle - A Theoretical Evaluation

Narayanan, P., Shen, M., Tunér, M., Tunestål, P. & Thern, M., 2012, SAE Technical Paper Series. Society of Automotive Engineers

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2011

A Four-Step Global Reaction Mechanism for CFD Simulations of Flexi-Fuel Burner for Gas Turbines

Abou-Taouk, A., Sigfrid, I., Whiddon, R. & Eriksson, L.-E., 2011, Turbulence, Heat and Mass Transfer 7. ICHMT, p. 785-788

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

CFD Investigation of Swirl-stabilized Flexi-fuel Burner Using Methane-air Mixture for Gas Turbines

Abou-Taouk, A., Sigfrid, I., Whiddon, R. & Eriksson, L.-E., 2011, Papers - American Institute of Aeronautics and Astronautics. ISABE, Vol. 1. p. 160-172

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Experimental Investigations of Lean Stability Limits of a Prototype Syngas Burner for Low Calorific Value Gases

Sigfrid, I., Whiddon, R., Aldén, M. & Klingmann, J., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. Gokulakrishnan, P. (ed.). American Society Of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

Parametric Study of Emissions from Low Calorific Value Syngas Combustion, with Variation of Fuel Distribution, in a Prototype Three Sector Burner

Sigfrid, I., Whiddon, R., Aldén, M. & Klingmann, J., 2011, ASME paper / GT. Myers, G. (ed.). American Society Of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access

2010

Application of artificial neural networks to the condition monitoring and diagnosis of a combined heat and power plant

Fast, M. & Palme, T., 2010, Energy. Elsevier, Vol. 35. p. 1114-1120

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Experimental Investigation of Laminar Flame Speeds for Medium Calorific Gas with Various Amounts of Hydrogen and Carbon Monoxide Content at Gas Turbine Temperatures

Sigfrid, I., Whiddon, R., Collin, R. & Klingmann, J., 2010, Proceedings of the ASME Turbo Expo 2010, GT2010-22275. American Society Of Mechanical Engineers (ASME), Vol. Volume 2: Combustion, Fuels and Emissions, Parts A and B. p. 173-181 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Optimal Combined Cycle For Co2 Capture With EGR

Jonshagen, K., Sipocz, N. & Genrup, M., 2010, Proceedings Of The ASME Turbo Expo 2010, Volume 3: Controls, Diagnostics and Instrumentation; Cycle Innovations; Marine. American Society Of Mechanical Engineers (ASME), Vol. 3. p. 867-875

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2009

A Novel Approach For Gas Turbine Condition Monitoring Combining Cusum Technique And Artificial Neural Network

Fast, M., Palme, T. & Genrup, M., 2009, Proceedings Of The Asme Turbo Expo 2009, Vol 1. American Society Of Mechanical Engineers (ASME), p. 567-574

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Low-Calorific Fuel Mix In A Large Size Combined Cycle Plant

Jonshagen, K., Genrup, M. & Eriksson, P., 2009, Proceedings Of The Asme Turbo Expo 2009, Vol 1. American Society Of Mechanical Engineers (ASME), p. 367-376

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Thermal Power Engineering

Research output

Search results