Lei Wang

2022

Crystal structure of DNA polymerase I from Thermus phage G20c

Ahlqvist, J., Linares-Pastén, J. A., Jasilionis, A., Welin, M., Håkansson, M., Svensson, L. A., Wang, L., Watzlawick, H., Ævarsson, A., Friðjónsson, Ó. H., Hreggviðsson, G. Ó., Ketelsen Striberny, B., Glomsaker, E., Lanes, O., Al-Karadaghi, S. & Nordberg Karlsson, E., 2022 Nov 1, In: Acta crystallographica. Section D, Structural biology. 78, Pt 11, p. 1384-1398 15 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effects of injection angle and injector mode variation on the fluidization performance of a powder-fueled ramjet

Xu, D., Luo, S., Song, J., Feng, Y. & Wang, L., 2022 Oct 1, In: Aerospace Science and Technology. 129, 107827.

Research output: Contribution to journal › Article › peer-review

Numerical study of heat transfer, flow fields, turbulent length scales, and anisotropy in corrugated heat exchanger channels

Karlsson, G., Fureby, C., Wang, L., Norberg, C., Holm, M. & Strömer, F., 2022 May 1, In: Physics of Fluids. 34, 5, 055123.

Research output: Contribution to journal › Article › peer-review

2021

A novel pipe structure for geyser elimination in a vertical cryogenic pipe

Mao, H., Li, Y., Wang, J., Ma, Y., Wang, L. & Sundén, B., 2021 Oct 1, In: International Journal of Heat and Mass Transfer. 178, 121631.

Research output: Contribution to journal › Article › peer-review

Numerical simulation of solid oxide fuel cells comparing different electrochemical kinetics

Zhang, X., Wang, L., Espinoza, M., Li, T. & Andersson, M., 2021 Jul 1, In: International Journal of Energy Research. 45, 9, p. 12980-12995 16 p.

Research output: Contribution to journal › Article › peer-review

Open Access

System behavior prediction by artificial neural network algorithm of a methanol steam reformer for polymer electrolyte fuel cell stack use

Qi, Y., Andersson, M., Wang, L. & Wang, J., 2021 Jun 1, In: Fuel Cells. 21, 3, p. 279-289 11 p.

Research output: Contribution to journal › Article › peer-review

2020

Design of Full-Scale Endwall Film Cooling of a Turbine Vane

Liu, J., Du, W., Zhang, G., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2020, In: Journal of Heat Transfer. 142, 2, 022201.

Research output: Contribution to journal › Article › peer-review

2019

Effect of the relative location of a pocket cavity on heat transfer and flow structures of the downstream endwall with a symmetrical vane

Liu, J., Hussain, S., Wang, W., Wang, L., Xie, G. & Sundén, B., 2019 Nov, In: International Journal of Thermal Sciences. 145, 106012.

Research output: Contribution to journal › Article › peer-review

Experimental study of fluid flow and heat transfer of jet impingement in cross-flow with a vortex generator pair

Wang, C., Wang, Z., Wang, L., Luo, L. & Sundén, B., 2019, In: International Journal of Heat and Mass Transfer. 135, p. 935-949 15 p.

Research output: Contribution to journal › Article › peer-review

Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes

Liu, J., Hussain, S., Wang, W., Wang, L., Xie, G. & Sundén, B., 2019, In: Journal of Heat Transfer. 141, 4, 041702.

Research output: Contribution to journal › Article › peer-review

Large eddy simulation of turbulent heat transfer in a non-isothermal channel: Effects of temperature-dependent viscosity and thermal conductivity

Wang, L., Liu, J., Hussain, S. & Sundén, B., 2019, In: International Journal of Thermal Sciences. 146, 106094.

Research output: Contribution to journal › Article › peer-review

Suppression of endwall heat transfer in the junction region with a symmetric airfoil by a vortex generator pair

Hussain, S., Liu, J., Wang, L. & Sundén, B., 2019, In: International Journal of Thermal Sciences. 136, p. 135-147 13 p.

Research output: Contribution to journal › Article › peer-review

Thermal performance enhancement in a wedge duct with in-line pin fins combined with vortex generators

Hussain, S., Liu, J., Wang, L. & Sunden, B. A., 2019, In: International Journal of Numerical Methods for Heat and Fluid Flow. 29, 8, p. 2545-2565

Research output: Contribution to journal › Article › peer-review

2018

Application of fractal theory in the arrangement of truncated ribs in a rectangular cooling channel (4: 1) of a turbine blade

Liu, J., Wang, J., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2018 Jul 5, In: Applied Thermal Engineering. 139, p. 488-505 18 p.

Research output: Contribution to journal › Article › peer-review

Conjugated heat transfer investigation with racetrack-shaped jet hole and double swirling chamber in rotating jet impingement

Wang, J., Liu, J., Wang, L., Sundén, B. & Wang, S., 2018 Jun 3, In: Numerical Heat Transfer; Part A: Applications. 73, 11, p. 768-787 20 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effects of a pocket cavity on heat transfer and flow characteristics of the endwall with a bluff body in a gas turbine engine

Liu, J., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2018 Oct 1, In: Applied Thermal Engineering. 143, p. 935-946 12 p.

Research output: Contribution to journal › Article › peer-review

Effects of the location of the pocket cavity on heat transfer and flow characteristics of the endwall with a symmetrical vane

Liu, J., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition: Heat Transfer. American Society Of Mechanical Engineers (ASME), Vol. 5B. GT2018-75177

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Effects of the pocket cavity on heat transfer and fluid flow of the downstream outlet guide vane at different flow attacking angles

Liu, J., Hussain, S., Wang, C., Wang, L., Xie, G. & Sundén, B., 2018, In: Numerical Heat Transfer; Part A: Applications. 74, 3, p. 1087-1104 18 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Experimental investigation of heat transfer enhancement on the endwall around an obstacle embedded with a vortex generator pair

Hussain, S., Liu, J., Wang, L. & Sundén, B., 2018, Proceeding: International Heat Transfer Conference 16. Begell House, p. 4971-4978 8 p. (International Heat Transfer Conference).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements

Liu, J., Hussain, S., Wang, J., Wang, L., Xie, G. & Sundén, B., 2018 Jan 1, In: International Journal of Thermal Sciences. 123, p. 99-116 18 p.

Research output: Contribution to journal › Article › peer-review

Investigation of heat transfer and fluid flow in fractal truncated ribbed channels for the internal cooling of turbine blades

Liu, J., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2018, Proceeding: International Heat Transfer Conference 16. Begell House, p. 3239-3246 8 p. (International Heat Transfer Conference).

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs

Wang, J., Liu, J., Wang, L., Sundén, B. & Wang, S., 2018 Jan, In: Applied Thermal Engineering. 129, p. 1369-1381

Research output: Contribution to journal › Article › peer-review

Reduction of heat transfer on the endwall in the upstream junction region of a symmetric airfoil with vortex generator pair

Hussain, S., Liu, J., Wang, L. & Sundén, B., 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition : Heat Transfer. American Society Of Mechanical Engineers (ASME), Vol. 5B. GT2018-75176

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Thermal performance of angled, V-shaped and leaning-V-shaped ribs in a rotating rectangular channel with 45° orientation

Wang, J., Luo, L., Wang, L., Sunden, B. A. & Wang, S., 2018 Jan 1, In: International Journal of Numerical Methods for Heat and Fluid Flow. 28, 3, p. 661-683 23 p.

Research output: Contribution to journal › Article › peer-review

2017

Effects of pin fin configurations on heat transfer and friction factor in an improved lamilloy cooling structure

Luo, L., Wang, C., Wang, L., Sundén, B. & Wang, S., 2017, In: Heat Transfer Research. 48, 7, p. 657-679 23 p.

Research output: Contribution to journal › Article › peer-review

Endwall heat transfer enhancement around cylinders with a wall-mounted vortex generator pair

Hussain, S., Liu, J., Wang, L. & Sundén, B., 2017, Heat Transfer and Thermal Engineering. American Society Of Mechanical Engineers (ASME), Vol. 8.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation

Liu, J., Xie, G., Sundén, B., Wang, L. & Andersson, M., 2017, In: International Journal of Numerical Methods for Heat and Fluid Flow. 27, 7, p. 1571-1595 25 p.

Research output: Contribution to journal › Article › peer-review

Heat transfer and turbulent flow characteristics over pocket cavity in the junction part of an outlet guide vane in a gas turbine

Liu, J., Hussain, S., Wang, L., Xie, G. & Sundén, B., 2017 Sep 1, In: Applied Thermal Engineering. 124, p. 831-843 13 p.

Research output: Contribution to journal › Article › peer-review

Measurements of Some Characteristics of Thermal Radiation in a 400-kW Grate-Fired Furnace Combusting Biomass

Hofgren, H., Sundén, B., Wang, L., Norman, T. & Mandø, M., 2017, In: Heat Transfer Engineering. 38, 5, p. 498-509

Research output: Contribution to journal › Article › peer-review

Multi-objective optimization of a solar receiver considering both the dimple/protrusion depth and delta-winglet vortex generators

Lei, L., Du, W., Wang, S., Wang, L., Sundén, B. & Zhang, X., 2017 Oct 15, In: Energy. 137, p. 1-19 19 p.

Research output: Contribution to journal › Article › peer-review

Numerical analysis of radiative heat transfer in an inhomogeneous and non-isothermal combustion system considering H₂O/CO₂/CO and soot

Wang, Z., Dong, S., He, Z., Wang, L., Yang, W. & Sunden, B. A., 2017, In: International Journal of Numerical Methods for Heat and Fluid Flow. 27, 9, p. 1967-1985 19 p.

Research output: Contribution to journal › Article › peer-review

On the solar receiver thermal enhancement by using the dimple combined with delta winglet vortex generator

Lei, L., Wen, F., Wang, L., Sundén, B. & Wang, S., 2017 Jan 25, In: Applied Thermal Engineering. 111, p. 586-598 13 p.

Research output: Contribution to journal › Article › peer-review

The effect of the pocket on the heat transfer of endwall with bluff body in the rear part of gas turbine

Liu, J., Hussain, S., Wang, L., Xie, G., Sundén, B., Abrahamsson, H. & Arroyo, C., 2017, Heat Transfer. American Society Of Mechanical Engineers (ASME), Vol. 5A-2017. GT2017-63191

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

2016

A nickel (II) PY5 complex as an electrocatalyst for water oxidation

Wang, L., Duan, L., Ambre, R. B., Daniel, Q., Chen, H., Sun, J., Das, B., Thapper, A., Uhlig, J., Dinér, P. & Sun, L., 2016 Mar 1, In: Journal of Catalysis. 335, p. 72-78 7 p.

Research output: Contribution to journal › Article › peer-review

A numerical investigation of dimple effects on internal heat transfer enhancement of a double wall cooling structure with jet impingement

Lei, L., Wang, C., Wang, L., Sunden, B. A. & Wang, S., 2016, In: International Journal of Numerical Methods for Heat and Fluid Flow. 26, 7, p. 2175-2197 23 p.

Research output: Contribution to journal › Article › peer-review

A numerical study of radiative heat transfer in a cylindrical furnace by using finite volume method

Wang, Z., Sunden, B., Dong, S., He, Z., Yang, W. & Wang, L., 2016, Heat Transfer in Energy Systems; Thermophysical Properties; Theory and Fundamentals in Heat Transfer; Nanoscale Thermal Transport; Heat Transfer in Equipment; Heat Transfer in Fire and Combustion; Transport Processes in Fuel Cells and Heat Pipes; Boiling and Condensation in Macro, Micro and Nanosystems. American Society Of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Thermal enhancement by using grooves and ribs combined with delta-winglet vortex generator in a solar receiver heat exchanger

Lei, L., Wen, F., Wang, L., Sundén, B. & Wang, S., 2016 Dec 1, In: Applied Energy. 183, p. 1317-1332 16 p.

Research output: Contribution to journal › Article › peer-review

2015

A novel control of jet impingement heat transfer in cross-flow by a vortex generator pair

Wang, C., Wang, L. & Sundén, B., 2015, In: International Journal of Heat and Mass Transfer. 88, p. 82-90

Research output: Contribution to journal › Article › peer-review

Computational investigation of dimple effects on heat transfer and friction factor in a Lamilloy cooling structure

Lei, L., Wang, C., Wang, L., Sundén, B. & Wang, S., 2015, In: Journal of Enhanced Heat Transfer. 22, 2, p. 147-175

Research output: Contribution to journal › Article › peer-review

Lei Wang

Research output

Search results