Flintstone2020

Ståhl, Jan-Eric (PI)
Bushlya, Volodymyr (Project coordinator)
Johansson, Daniel (Researcher)
Windmark, Christina (Researcher)
Lenrick, Filip (Researcher)
Ahadi, Aylin (Researcher)
Agmell, Mathias (Researcher)
Hörndahl, Mikael (Research engineer)
Gutnichenko, Oleksandr (Researcher)

Project: Research

19 Article
5 Paper in conference proceeding
1 Letter

25 results

2019
Mechanical Properties of Boron Phosphides
Solozhenko, V. & Bushlya, V., 2019, In: Journal of Superhard Materials. 41, 2, p. 84-89 6 p.
Research output: Contribution to journal › Article › peer-review

File
93 Downloads (Pure)
On chemical and diffusional interactions between PCBN and superalloy Inconel 718: Imitational experiments
Bushlya, V., Bjerke, A., Turkevich, V. Z., Lenrick, F., Petrusha, I. A., Cherednichenko, K. A. & Ståhl, J. E., 2019, In: Journal of the European Ceramic Society. 39, 8, p. 2658-2665
Research output: Contribution to journal › Article › peer-review

File
238 Downloads (Pure)
2018
An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming
Kryzhanivskyy, V., Shupikov, O., Bushlya, V., Gutnichenko, O., Hörndahl, M., M’Saoubi, R. & Ståhl, J-E., 2018, In: Procedia Manufacturing. 25, p. 287-293 7 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
140 Downloads (Pure)
Application of Colding tool life equation on the drilling fiber reinforcement polymers
Hrechuk, A., Johansson, D., Bushlya, V., Devin, L. & Ståhl, J-E., 2018, In: Procedia Manufacturing. 25, p. 302-308 7 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
91 Downloads (Pure)
CPR a general Cost Performance Ratio in Manufacturing - A KPI for judgement of different technologies and development scenarios
Windmark, C., Bushlya, V. & Ståhl, J-E., 2018 Jun 27, 51st CIRP Conference on Manufacturing Systems. Elsevier, Vol. 72. p. 1220-1226 7 p. (Procedia CIRP; vol. 72).
Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access
Development of a simulation model to study tool loads in pcBN when machining AISI 316L
Agmell, M., Bushlya, V., Laakso, S., Ahadi, A. & Ståhl, J-E., 2018, In: International Journal of Advanced Manufacturing Technology. 96, 5-8, p. 2853-2865 13 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
193 Downloads (Pure)
Equivalent Chip Thickness and its Influence on Tool Life
Johansson, D., Lindvall, R., Fröström, M., Bushlya, V. & Ståhl, J-E., 2018, In: Procedia Manufacturing. 25, p. 344-350 7 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
243 Downloads (Pure)
Heat flux in metal cutting: Experiment, model, and comparative analysis
Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M'Saoubi, R. & Ståhl, J. E., 2018 Nov 1, In: International Journal of Machine Tools and Manufacture. 134, p. 81-97 17 p.
Research output: Contribution to journal › Article › peer-review

File
367 Downloads (Pure)
Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718
Gutnichenko, O., Bushlya, V., Bihagen, S. & Ståhl, J-E., 2018, In: Procedia Manufacturing. 25, p. 330-337 7 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
108 Downloads (Pure)
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
Gutnichenko, O., Bushlya, V., Bihagen, S. & Ståhl, J. E., 2018, 8th CIRP Conference on High Performance Cutting. Elsevier, Vol. 77. p. 437-440 4 p. (Procedia CIRP).
Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access
File
138 Downloads (Pure)
Influence of oxygen on the tool wear in machining
Bushlya, V., Lenrick, F., Ståhl, J. E. & M'Saoubi, R., 2018 Jan 1, In: CIRP Annals - Manufacturing Technology. 67, 1, p. 79-82 4 p.
Research output: Contribution to journal › Article › peer-review

File
221 Downloads (Pure)
Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr₃C₂ binder phase.
Slipchenko, K., Petrusha, I., Turkevich, V., Johansson, J., Bushlya, V. & Ståhl, J. E., 2018 Jan 1, Procedia CIRP. Vol. 72. p. 1433-1438 6 p. (Procedia CIRP).
Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access
File
219 Downloads (Pure)
Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model
Johansson, D., Akujärvi, V., Hägglund, S., Bushlya, V. & Ståhl, J. E., 2018 Jan 1, Procedia CIRP. Vol. 72. p. 197-201 5 p. (Procedia CIRP).
Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access
File
176 Downloads (Pure)
Superhard pcBN materials with chromium compounds as a binder
Slipchenko, K., Turkevich, V., Petrusha, I., Bushlya, V. & Ståhl, J-E., 2018, In: Procedia Manufacturing. 25, p. 322-329 8 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
181 Downloads (Pure)
2017
An integrated cost model for metal cutting operations based on engagement time and a cost breakdown approach
Ståhl, J. E., 2017, In: International Journal of Manufacturing Research. 12, 4, p. 379-404 26 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
251 Downloads (Pure)
Assessment of Commonly used Tool Life Models in Metal Cutting
Johansson, D., Hägglund, S., Bushlya, V. & Ståhl, J. E., 2017, In: Procedia Manufacturing. 11, p. 602-609 8 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
150 Downloads (Pure)
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M'Saoubi, R. & Ståhl, J. E., 2017, 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO). Elsevier, p. 122-127 6 p. (Procedia CIRP; vol. 58).
Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Open Access
File
147 Downloads (Pure)
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
Zhao, T., Agmell, M., Persson, J., Bushlya, V., Ståhl, J. E. & Zhou, J. M., 2017 Jul 1, In: Journal of Superhard Materials. 39, 4, p. 251-258 8 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
275 Downloads (Pure)
Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M’Saoubi, R. & Ståhl, J. E., 2017 May 1, In: Journal of Superhard Materials. 39, 3, p. 192-202 11 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
152 Downloads (Pure)
Mechanical properties of superhard boron subnitride B₁₃N₂
Solozhenko, V. L. & Bushlya, V., 2017 Nov 1, In: Journal of Superhard Materials. 39, 6, p. 422-426 5 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
158 Downloads (Pure)
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
Bushlya, V., Lenrick, F., Gutnichenko, O., Petrusha, I., Osipov, O., Kristiansson, S. & Stahl, J. E., 2017 Apr 15, In: Wear. 376-377, p. 152-164 13 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
226 Downloads (Pure)
Sensitivity of Colding tool life equation on the dimensions of experimental dataset
Johansson, D., Hägglund, S., Bushlya, V. & Ståhl, J. E., 2017 Jul 1, In: Journal of Superhard Materials. 39, 4, p. 271-281 11 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
179 Downloads (Pure)
Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: Structure, properties, application
Kolabylina, T., Bushlya, V., Petrusha, I. A., Johansson, D., Ståhl, J. E. & Turkevich, V., 2017 May 1, In: Journal of Superhard Materials. 39, 3, p. 155-165 11 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
271 Downloads (Pure)
Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass
Bushlya, V., Johansson, D., Lenrick, F., Ståhl, J. E. & Schultheiss, F., 2017 Apr 15, In: Wear. 376-377, p. 143-151 9 p.
Research output: Contribution to journal › Article › peer-review

Open Access
File
232 Downloads (Pure)
2016
Thermodynamic calculation of the phase diagram for the Al-B-C system at pressure 7.7 GPa
Turkevich, VZ., Stratiichuk, DA. & Turkevich, DV., 2016, In: Journal of Superhard Materials. 38, 6, p. 423-426 4 p.
Research output: Contribution to journal › Letter › peer-review

Open Access
File
140 Downloads (Pure)

Flintstone2020

Research output

Search results