A 0.55mW SAW-Less Receiver Front-End for Bluetooth Low Energy Applications

Carl Bryant, Henrik Sjöland

Research output: Contribution to journalArticlepeer-review

Abstract

Email


Print


Request Permissions


Save to Project













This paper presents an ultra-low power direct conversion receiver front-end operating at 2.6 GHz with high out-of-band linearity and low quadrature error. This is achieved through the use of efficient mixers with improved out-of-band suppression, including rejection of the second harmonic, and an local-oscillator generator achieving current reuse and rejection of voltage-controlled oscillator signal imbalance through the use of complementary devices. Manufactured in 65 nm complementary metal-oxide-semiconductor and with a power consumption below 550 μW from a 0.85 V supply, the front-end achieves a conversion gain of 41 dB and a noise figure of 9.6 dB. It has an out-of-band IIP3 and IIP2 of -3 dBm and 29.5 dBm, respectively. The quadrature phase error is below 0.6°. Requiring only two inductors it occupies an area of just 0.15 mm2 excluding pads.
Original languageEnglish
Pages (from-to)262-272
JournalIEEE Journal on Emerging and Selected Topics in Circuits and Systems
Volume4
Issue number3
DOIs
Publication statusPublished - 2014

Subject classification (UKÄ)

  • Electrical Engineering, Electronic Engineering, Information Engineering

Fingerprint

Dive into the research topics of 'A 0.55mW SAW-Less Receiver Front-End for Bluetooth Low Energy Applications'. Together they form a unique fingerprint.

Cite this