Biological treatment of whitewater in a laboratory process in order to determine kinetic parameters for model development

Tomas Alexandersson, Ulf Jeppsson, Christian Rosén

Research output: Contribution to journalArticlepeer-review

Abstract

Implementation of an in-mill biological treatment plant is one solution to the problems associated with closure of whitewater systems. It is, however, important to operate the treatment with low concentration of nutrients in the effluent. The effect on the COD reduction from decreased additions of NH4-N and PO4-P were investigated in three parallel aerobic suspended carrier reactors during treatment at 46 to 48degreesC of whitewater from a recycled paper mill producing liner and fluting. In the reference reactor, a COD reduction of 89% was achieved and 45.6 mg NH4-N/(g COD reduced) and 11.6 mg PO4-P/(g COD reduced) was consumed at an organic load around 20 kg COD/(m(3.)d). Reduced additions of NH4-N decreased the COD reduction. Addition of 56% of the consumption of NH4-N in the reference reactor resulted in a COD reduction of 80%. The response from decreased addition of PO4-P was different compared to NH4-N but it could not be determined if this is due to unsuitable experimental design or a different reaction mechanism. Reducing the addition of PO4-P to 26% of the consumption of PO4-P in the reference reactor, decreased the COD reduction to 83%. The main conclusion from the experiment is: biological treatment has the potential of treating whitewater from recycled paper mills with low effluent nutrient concentrations.
Original languageEnglish
Pages (from-to)195-206
JournalWater Science and Technology
Volume50
Issue number3
Publication statusPublished - 2004

Subject classification (UKÄ)

  • Other Electrical Engineering, Electronic Engineering, Information Engineering

Free keywords

  • pulp and paper
  • nutrients
  • model
  • aerobic degradation
  • closure
  • whitewater

Fingerprint

Dive into the research topics of 'Biological treatment of whitewater in a laboratory process in order to determine kinetic parameters for model development'. Together they form a unique fingerprint.

Cite this