Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes.

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H(2)O(2). The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E degrees ') of -33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k (s), was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s(-1) on SPCE, 2.78 s(-1) on MWCNT-SPCE and 4.06 s(-1) on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85 x 10(-10) mol cm(-2), 4.13 x 10(-10) mol cm(-2) and 5.20 x 10(-10) mol cm(-2). During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H(2)O(2)) with a linear detection range from 1 muM to 1000 muM on the surface of SPCEs, from 0.5 muM to 1000 muM on MWCNT-SPCEs, and from 0.1 muM to 1000 muM on SWCNT-SPCEs. The lower limit of detection was 0.8 muM, 0.4 muM and 0.1 muM at 3sigma at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis-Menten constant, [Formula: see text], for the H(2)O(2) sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.