Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac

Renato de Prisco; Anders Karlsson; Mohammad Eshraqi; Yngve Levinsen; Ryoichi Miyamoto

doi:10.18429/JACoW-LINAC2016-MOPLR070

Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac

Renato de Prisco, Anders Karlsson, Mohammad Eshraqi, Yngve Levinsen, Ryoichi Miyamoto

European Spallation Source ESS AB

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

108 Downloads (Pure)

Abstract

Making an accurate Radio Frequency, RF, design of any accelerating structure is fundamental to ensure that electromagnetic and beam dynamics requirements will be achieved. This is essential for the most complicated accelerating structures
like the Drift Tube Linac, DTL; in this case a meticulous design facilitates the RF commissioning too. In this paper the influence of the interfaces and of the field stabilization system on the RF design is analyzed and an advanced design methodology to mitigate field degradation is presented.

Original language	English
Title of host publication	LINAC16 28th Linear Accelerator Conference
Publisher	JACoW Publishing
Pages	294
Number of pages	297
ISBN (Electronic)	978-3-95450-169-4
DOIs	https://doi.org/10.18429/JACoW-LINAC2016-MOPLR070
Publication status	Published - 2016
Event	LINAC16 28th Linear Accelerator Conference - Kellogg Hotel & Conference Center, East Lansing, MI, United States Duration: 2016 Sept 25 → 2016 Sept 30

Conference

Conference	LINAC16 28th Linear Accelerator Conference
Country/Territory	United States
City	East Lansing, MI
Period	2016/09/25 → 2016/09/30

Subject classification (UKÄ)

Other Electrical Engineering, Electronic Engineering, Information Engineering

Free keywords

INTEGRATION, INTERFACES, STABILIZATION, SYSTEM, DESIGN, DRIFT, TUBE, LINAC, ESS, esss, DTL, drift, Tube, Linac, beam, dynamics, RF, radio, frequency, stabilization, post, couplers, coupler, tuner, tuners, pick, accelerating, sensitivity, tuning, tilt, pmq, permanent, quadrupole, focusing, detuning, mismatch, parameter, matched, twiss, parameters, phase, advance, cooling, stem, stems, compensation, software, emittance, growth, tune, depression, error, study, studies, position, monitor, monitors, steerers, adjust, steerer, rfq, input, alignment, angle, cavity, tank, dipole, static, dynamic, PIC-NIC, PIC-NIR, statistic, statistical, TraceWin, confidence, power, losses, lost, level, longitudinal, transverse, MEBT, medium, beta, high, average

Access to Document

10.18429/JACoW-LINAC2016-MOPLR070Licence: CC BY

IntegrationOfTheInterfacesInTheESSDTL

Cite this

@inproceedings{8189c5aa9da6463c87dcf767aeb72c15,

title = "Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac",

abstract = "Making an accurate Radio Frequency, RF, design of any accelerating structure is fundamental to ensure that electromagnetic and beam dynamics requirements will be achieved. This is essential for the most complicated accelerating structures like the Drift Tube Linac, DTL; in this case a meticulous design facilitates the RF commissioning too. In this paper the influence of the interfaces and of the field stabilization system on the RF design is analyzed and an advanced design methodology to mitigate field degradation is presented.",

keywords = "INTEGRATION, INTERFACES, STABILIZATION, SYSTEM, DESIGN, DRIFT, TUBE, LINAC, ESS, esss, DTL, drift, Tube, Linac, beam, dynamics, RF, radio, frequency, stabilization, post, couplers, coupler, tuner, tuners, pick, accelerating, sensitivity, tuning, tilt, pmq, permanent, quadrupole, focusing, detuning, mismatch, parameter, matched, twiss, parameters, phase, advance, cooling, stem, stems, compensation, software, emittance, growth, tune, depression, error, study, studies, position, monitor, monitors, steerers, adjust, steerer, rfq, input, alignment, angle, cavity, tank, dipole, static, dynamic, PIC-NIC, PIC-NIR, statistic, statistical, TraceWin, confidence, power, losses, lost, level, longitudinal, transverse, MEBT, medium, beta, high, average",

author = "\{de Prisco\}, Renato and Anders Karlsson and Mohammad Eshraqi and Yngve Levinsen and Ryoichi Miyamoto",

year = "2016",

doi = "10.18429/JACoW-LINAC2016-MOPLR070",

language = "English",

pages = "294",

booktitle = "LINAC16 28th Linear Accelerator Conference",

publisher = "JACoW Publishing",

note = "LINAC16 28th Linear Accelerator Conference ; Conference date: 25-09-2016 Through 30-09-2016",

}

de Prisco, R , Karlsson, A, Eshraqi, M, Levinsen, Y & Miyamoto, R 2016, Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac. in LINAC16 28th Linear Accelerator Conference. JACoW Publishing, pp. 294, LINAC16 28th Linear Accelerator Conference, East Lansing, MI, United States, 2016/09/25. https://doi.org/10.18429/JACoW-LINAC2016-MOPLR070

TY - GEN

T1 - Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac

AU - de Prisco, Renato

AU - Karlsson, Anders

AU - Eshraqi, Mohammad

AU - Levinsen, Yngve

AU - Miyamoto, Ryoichi

PY - 2016

Y1 - 2016

N2 - Making an accurate Radio Frequency, RF, design of any accelerating structure is fundamental to ensure that electromagnetic and beam dynamics requirements will be achieved. This is essential for the most complicated accelerating structures like the Drift Tube Linac, DTL; in this case a meticulous design facilitates the RF commissioning too. In this paper the influence of the interfaces and of the field stabilization system on the RF design is analyzed and an advanced design methodology to mitigate field degradation is presented.

AB - Making an accurate Radio Frequency, RF, design of any accelerating structure is fundamental to ensure that electromagnetic and beam dynamics requirements will be achieved. This is essential for the most complicated accelerating structures like the Drift Tube Linac, DTL; in this case a meticulous design facilitates the RF commissioning too. In this paper the influence of the interfaces and of the field stabilization system on the RF design is analyzed and an advanced design methodology to mitigate field degradation is presented.

KW - INTEGRATION, INTERFACES, STABILIZATION, SYSTEM, DESIGN, DRIFT, TUBE, LINAC, ESS, esss, DTL, drift, Tube, Linac, beam, dynamics, RF, radio, frequency, stabilization, post, couplers, coupler, tuner, tuners, pick, accelerating, sensitivity, tuning, tilt, pmq

UR - https://www.scopus.com/pages/publications/85081049499

U2 - 10.18429/JACoW-LINAC2016-MOPLR070

DO - 10.18429/JACoW-LINAC2016-MOPLR070

M3 - Paper in conference proceeding

SP - 294

BT - LINAC16 28th Linear Accelerator Conference

PB - JACoW Publishing

T2 - LINAC16 28th Linear Accelerator Conference

Y2 - 25 September 2016 through 30 September 2016

ER -

Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac

Abstract

Conference

Subject classification (UKÄ)

Free keywords

Access to Document

Other files and links

Fingerprint

Cite this