Low-order and causal twisted-pair cable modeling by means of the Hilbert transform

Fredrik Lindqvist; Per Ola Börjesson; Per Ödling; Stefan Höst; Klas Eriksson; Thomas Magesacher

doi:10.1063/1.3117107

Low-order and causal twisted-pair cable modeling by means of the Hilbert transform

Fredrik Lindqvist, Per Ola Börjesson, Per Ödling, Stefan Höst, Klas Eriksson, Thomas Magesacher

Department of Electrical and Information Technology

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Abstract

A new low-order and causal twisted-pair cable model for the copper access network is derived. From the serial resistance of the widely used, but non-causal, BT0 model, the serial inductance is computed via the Hilbert transform. By doing so, a causal cable model is obtained containing fewer parameters compared to the BT0 model. The deviation between the two models is evaluated for the standardized ETSI cables.

Original language	English
Title of host publication	AIP Conference Proceedings
Publisher	American Institute of Physics (AIP)
Pages	301-310
Number of pages	10
DOIs	https://doi.org/10.1063/1.3117107
Publication status	Published - 2008
Event	Nordic Radio Science and Communication Conference, 2008 - Växjö, Växjö, Sweden Duration: 2008 Jun 9 → 2008 Jun 11

Conference

Conference	Nordic Radio Science and Communication Conference, 2008
Abbreviated title	RVK 08 MMWP08
Country/Territory	Sweden
City	Växjö
Period	2008/06/09 → 2008/06/11

Subject classification (UKÄ)

Electrical Engineering, Electronic Engineering, Information Engineering

Access to Document

10.1063/1.3117107

Cite this

@inproceedings{15dcbd91a5784b759fadc6d04a3276d8,

title = "Low-order and causal twisted-pair cable modeling by means of the Hilbert transform",

abstract = "A new low-order and causal twisted-pair cable model for the copper access network is derived. From the serial resistance of the widely used, but non-causal, BT0 model, the serial inductance is computed via the Hilbert transform. By doing so, a causal cable model is obtained containing fewer parameters compared to the BT0 model. The deviation between the two models is evaluated for the standardized ETSI cables.",

author = "Fredrik Lindqvist and B{\"o}rjesson, {Per Ola} and Per {\"O}dling and Stefan H{\"o}st and Klas Eriksson and Thomas Magesacher",

year = "2008",

doi = "10.1063/1.3117107",

language = "English",

pages = "301--310",

booktitle = "AIP Conference Proceedings",

publisher = "American Institute of Physics (AIP)",

address = "United States",

note = "Nordic Radio Science and Communication Conference, 2008, RVK 08 MMWP08 ; Conference date: 09-06-2008 Through 11-06-2008",

}

Lindqvist, F, Börjesson, PO , Ödling, P , Höst, S, Eriksson, K & Magesacher, T 2008, Low-order and causal twisted-pair cable modeling by means of the Hilbert transform. in AIP Conference Proceedings. American Institute of Physics (AIP), pp. 301-310, Nordic Radio Science and Communication Conference, 2008, Växjö, Sweden, 2008/06/09. https://doi.org/10.1063/1.3117107

TY - GEN

T1 - Low-order and causal twisted-pair cable modeling by means of the Hilbert transform

AU - Lindqvist, Fredrik

AU - Börjesson, Per Ola

AU - Ödling, Per

AU - Höst, Stefan

AU - Eriksson, Klas

AU - Magesacher, Thomas

PY - 2008

Y1 - 2008

N2 - A new low-order and causal twisted-pair cable model for the copper access network is derived. From the serial resistance of the widely used, but non-causal, BT0 model, the serial inductance is computed via the Hilbert transform. By doing so, a causal cable model is obtained containing fewer parameters compared to the BT0 model. The deviation between the two models is evaluated for the standardized ETSI cables.

AB - A new low-order and causal twisted-pair cable model for the copper access network is derived. From the serial resistance of the widely used, but non-causal, BT0 model, the serial inductance is computed via the Hilbert transform. By doing so, a causal cable model is obtained containing fewer parameters compared to the BT0 model. The deviation between the two models is evaluated for the standardized ETSI cables.

U2 - 10.1063/1.3117107

DO - 10.1063/1.3117107

M3 - Paper in conference proceeding

SP - 301

EP - 310

BT - AIP Conference Proceedings

PB - American Institute of Physics (AIP)

T2 - Nordic Radio Science and Communication Conference, 2008

Y2 - 9 June 2008 through 11 June 2008

ER -

Low-order and causal twisted-pair cable modeling by means of the Hilbert transform

Abstract

Conference

Subject classification (UKÄ)

Access to Document

Fingerprint

Cite this