Prototype based study of different winding configurations with SM2C core

Avo Reinap; Conny Högmark; Mats Alaküla; Tord Cedell; Mats Andersson

doi:10.1109/ICELMACH.2010.5607894

Prototype based study of different winding configurations with SM2C core

Avo Reinap, Conny Högmark, Mats Alaküla, Tord Cedell, Mats Andersson

Research output: Chapter in Book/Report/Conference proceeding › Paper in conference proceeding › peer-review

Abstract

This paper summarises the outcome of an experimental study, which is related to a winding arrangement in a stator core that is made of Soft Magnetic Mouldable Composite – SM2C. The comparison is made between a distributed concentrated winding and a modular wave-winding, where the modular wave-coils are distributed either axially or circumferentially. Manufacturability and high winding fill factor are vital for a low permeability stator core in order to gain a good machine performance and a low cost in combination with moulding technique. A number of stators are built and verified in order to learn the theoretical and practical issues related to wave-windings.

Original language	English
Title of host publication	ICEM 2010. 19th International Conference on Electrical Machines, 2010
DOIs	https://doi.org/10.1109/ICELMACH.2010.5607894
Publication status	Published - 2010
Event	XIX International Conference on Electrical Machines (ICEM), 2010 - Rome, Italy Duration: 2010 Sept 6 → 2010 Sept 8

Conference

Conference	XIX International Conference on Electrical Machines (ICEM), 2010
Country/Territory	Italy
City	Rome
Period	2010/09/06 → 2010/09/08

Subject classification (UKÄ)

Other Electrical Engineering, Electronic Engineering, Information Engineering
Materials Engineering

Access to Document

10.1109/ICELMACH.2010.5607894

Cite this

@inproceedings{34f197b387ae4ac2a730c184afe7a4c2,

title = "Prototype based study of different winding configurations with SM2C core",

abstract = "This paper summarises the outcome of an experimental study, which is related to a winding arrangement in a stator core that is made of Soft Magnetic Mouldable Composite – SM2C. The comparison is made between a distributed concentrated winding and a modular wave-winding, where the modular wave-coils are distributed either axially or circumferentially. Manufacturability and high winding fill factor are vital for a low permeability stator core in order to gain a good machine performance and a low cost in combination with moulding technique. A number of stators are built and verified in order to learn the theoretical and practical issues related to wave-windings.",

author = "Avo Reinap and Conny H{\"o}gmark and Mats Alak{\"u}la and Tord Cedell and Mats Andersson",

year = "2010",

doi = "10.1109/ICELMACH.2010.5607894",

language = "English",

booktitle = "ICEM 2010. 19th International Conference on Electrical Machines, 2010",

note = " XIX International Conference on Electrical Machines (ICEM), 2010 ; Conference date: 06-09-2010 Through 08-09-2010",

}

TY - GEN

T1 - Prototype based study of different winding configurations with SM2C core

AU - Reinap, Avo

AU - Högmark, Conny

AU - Alaküla, Mats

AU - Cedell, Tord

AU - Andersson, Mats

PY - 2010

Y1 - 2010

N2 - This paper summarises the outcome of an experimental study, which is related to a winding arrangement in a stator core that is made of Soft Magnetic Mouldable Composite – SM2C. The comparison is made between a distributed concentrated winding and a modular wave-winding, where the modular wave-coils are distributed either axially or circumferentially. Manufacturability and high winding fill factor are vital for a low permeability stator core in order to gain a good machine performance and a low cost in combination with moulding technique. A number of stators are built and verified in order to learn the theoretical and practical issues related to wave-windings.

AB - This paper summarises the outcome of an experimental study, which is related to a winding arrangement in a stator core that is made of Soft Magnetic Mouldable Composite – SM2C. The comparison is made between a distributed concentrated winding and a modular wave-winding, where the modular wave-coils are distributed either axially or circumferentially. Manufacturability and high winding fill factor are vital for a low permeability stator core in order to gain a good machine performance and a low cost in combination with moulding technique. A number of stators are built and verified in order to learn the theoretical and practical issues related to wave-windings.

UR - https://www.scopus.com/pages/publications/78649619188

U2 - 10.1109/ICELMACH.2010.5607894

DO - 10.1109/ICELMACH.2010.5607894

M3 - Paper in conference proceeding

BT - ICEM 2010. 19th International Conference on Electrical Machines, 2010

T2 - XIX International Conference on Electrical Machines (ICEM), 2010

Y2 - 6 September 2010 through 8 September 2010

ER -

Prototype based study of different winding configurations with SM2C core

Abstract

Conference

Subject classification (UKÄ)

Access to Document

Other files and links

Fingerprint

Cite this