The MAXIII storage ring

Magnus Sjöström; Erik Wallén; Mikael Eriksson; Lars-Johan Lindgren

doi:10.1016/j.nima.2008.12.195

The MAXIII storage ring

Magnus Sjöström, Erik Wallén, Mikael Eriksson, Lars-Johan Lindgren

MAX IV Laboratory

Research output: Contribution to journal › Article › peer-review

Abstract

One of the primary goals of the 700MeV MAX III synchrotron radiation source is to test and gain experience with new magnet and accelerator technology. Each magnet cell is machined out of two solid iron blocks that are then sandwiched together after coil and quadrupole installation. The MAX III ring makes extensive use of combined function magnets to obtain a compact lattice. In order to obtain flexibility in machine tuning pole face current strips are used in the main dipoles, which also contain the horizontally defocusing gradients. Commissioning finished in 2007 and MAX III is now going into user operation. Over the last year, MAX III has been characterized in order to both obtain calibrated models for operation purposes as well as evaluating the magnet technology. The characterization results will be described in this paper.

Original language	English
Pages (from-to)	229-244
Journal	Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment
Volume	601
Issue number	3
DOIs	https://doi.org/10.1016/j.nima.2008.12.195
Publication status	Published - 2009

Subject classification (UKÄ)

Subatomic Physics

Free keywords

Accelerator Storage ring Magnet technology

Access to Document

10.1016/j.nima.2008.12.195

Cite this

@article{b06927ca20794e8ba527105c194120a2,

title = "The MAXIII storage ring",

abstract = "One of the primary goals of the 700MeV MAX III synchrotron radiation source is to test and gain experience with new magnet and accelerator technology. Each magnet cell is machined out of two solid iron blocks that are then sandwiched together after coil and quadrupole installation. The MAX III ring makes extensive use of combined function magnets to obtain a compact lattice. In order to obtain flexibility in machine tuning pole face current strips are used in the main dipoles, which also contain the horizontally defocusing gradients. Commissioning finished in 2007 and MAX III is now going into user operation. Over the last year, MAX III has been characterized in order to both obtain calibrated models for operation purposes as well as evaluating the magnet technology. The characterization results will be described in this paper.",

keywords = "Accelerator Storage ring Magnet technology",

author = "Magnus Sj{\"o}str{\"o}m and Erik Wall{\'e}n and Mikael Eriksson and Lars-Johan Lindgren",

year = "2009",

doi = "10.1016/j.nima.2008.12.195",

language = "English",

volume = "601",

pages = "229--244",

journal = "Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment",

issn = "0167-5087",

publisher = "Elsevier",

number = "3",

}

TY - JOUR

T1 - The MAXIII storage ring

AU - Sjöström, Magnus

AU - Wallén, Erik

AU - Eriksson, Mikael

AU - Lindgren, Lars-Johan

PY - 2009

Y1 - 2009

N2 - One of the primary goals of the 700MeV MAX III synchrotron radiation source is to test and gain experience with new magnet and accelerator technology. Each magnet cell is machined out of two solid iron blocks that are then sandwiched together after coil and quadrupole installation. The MAX III ring makes extensive use of combined function magnets to obtain a compact lattice. In order to obtain flexibility in machine tuning pole face current strips are used in the main dipoles, which also contain the horizontally defocusing gradients. Commissioning finished in 2007 and MAX III is now going into user operation. Over the last year, MAX III has been characterized in order to both obtain calibrated models for operation purposes as well as evaluating the magnet technology. The characterization results will be described in this paper.

AB - One of the primary goals of the 700MeV MAX III synchrotron radiation source is to test and gain experience with new magnet and accelerator technology. Each magnet cell is machined out of two solid iron blocks that are then sandwiched together after coil and quadrupole installation. The MAX III ring makes extensive use of combined function magnets to obtain a compact lattice. In order to obtain flexibility in machine tuning pole face current strips are used in the main dipoles, which also contain the horizontally defocusing gradients. Commissioning finished in 2007 and MAX III is now going into user operation. Over the last year, MAX III has been characterized in order to both obtain calibrated models for operation purposes as well as evaluating the magnet technology. The characterization results will be described in this paper.

KW - Accelerator Storage ring Magnet technology

U2 - 10.1016/j.nima.2008.12.195

DO - 10.1016/j.nima.2008.12.195

M3 - Article

SN - 0167-5087

VL - 601

SP - 229

EP - 244

JO - Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment

JF - Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment

IS - 3

ER -

The MAXIII storage ring

Abstract

Subject classification (UKÄ)

Free keywords

Access to Document

Fingerprint

Cite this