Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel

Volodymyr Bushlya; Oleksandr Gutnichenko; Jinming Zhou; Jan-Eric Ståhl; S. Gunnarsson

doi:10.3103/S1063457614010080

Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel

Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Jan-Eric Ståhl, S. Gunnarsson

Research output: Contribution to journal › Article › peer-review

Abstract

The paper presents the results of comparative study of performance of cutting tools made of ceramic-bound, binderless cBN, and wBN-cBN tool materials. The tool performance was assessed by tool wear-resistance, values of cutting forces, parameters of machined surface quality, and the state of sub-surface layer generated in continuous turning of hardened cold work tool steel. The tests were carried out under conditions of high speed machining (v (c) = 120-180 m/min) both with and without a coolant. The best tool performance by the above-mentioned criteria is provided by a low-cBN material with ceramic binder.

Original language	English
Pages (from-to)	49-60
Journal	Journal of Superhard Materials
Volume	36
Issue number	1
DOIs	https://doi.org/10.3103/S1063457614010080
Publication status	Published - 2014

Subject classification (UKÄ)

Materials Engineering

Free keywords

CBN
wear
white layer
coldwork steels
hard turning

Access to Document

10.3103/S1063457614010080

Cite this

@article{e9332ea9f465465b8026714bec00e41c,

title = "Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel",

abstract = "The paper presents the results of comparative study of performance of cutting tools made of ceramic-bound, binderless cBN, and wBN-cBN tool materials. The tool performance was assessed by tool wear-resistance, values of cutting forces, parameters of machined surface quality, and the state of sub-surface layer generated in continuous turning of hardened cold work tool steel. The tests were carried out under conditions of high speed machining (v (c) = 120-180 m/min) both with and without a coolant. The best tool performance by the above-mentioned criteria is provided by a low-cBN material with ceramic binder.",

keywords = "CBN, wear, white layer, coldwork steels, hard turning",

author = "Volodymyr Bushlya and Oleksandr Gutnichenko and Jinming Zhou and Jan-Eric St{\aa}hl and S. Gunnarsson",

year = "2014",

doi = "10.3103/S1063457614010080",

language = "English",

volume = "36",

pages = "49--60",

journal = "Journal of Superhard Materials",

issn = "1934-9408",

publisher = "Springer",

number = "1",

}

TY - JOUR

T1 - Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel

AU - Bushlya, Volodymyr

AU - Gutnichenko, Oleksandr

AU - Zhou, Jinming

AU - Ståhl, Jan-Eric

AU - Gunnarsson, S.

PY - 2014

Y1 - 2014

N2 - The paper presents the results of comparative study of performance of cutting tools made of ceramic-bound, binderless cBN, and wBN-cBN tool materials. The tool performance was assessed by tool wear-resistance, values of cutting forces, parameters of machined surface quality, and the state of sub-surface layer generated in continuous turning of hardened cold work tool steel. The tests were carried out under conditions of high speed machining (v (c) = 120-180 m/min) both with and without a coolant. The best tool performance by the above-mentioned criteria is provided by a low-cBN material with ceramic binder.

AB - The paper presents the results of comparative study of performance of cutting tools made of ceramic-bound, binderless cBN, and wBN-cBN tool materials. The tool performance was assessed by tool wear-resistance, values of cutting forces, parameters of machined surface quality, and the state of sub-surface layer generated in continuous turning of hardened cold work tool steel. The tests were carried out under conditions of high speed machining (v (c) = 120-180 m/min) both with and without a coolant. The best tool performance by the above-mentioned criteria is provided by a low-cBN material with ceramic binder.

KW - CBN

KW - wear

KW - white layer

KW - coldwork steels

KW - hard turning

U2 - 10.3103/S1063457614010080

DO - 10.3103/S1063457614010080

M3 - Article

SN - 1934-9408

VL - 36

SP - 49

EP - 60

JO - Journal of Superhard Materials

JF - Journal of Superhard Materials

IS - 1

ER -

Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel

Abstract

Subject classification (UKÄ)

Free keywords

Access to Document

Fingerprint

Cite this