Control Engineering Practice, 0967-0661

Journal

More filtering options
  1. Article
  2. An experimental comparison of PID autotuners

    Josefin Berner, Kristian Soltesz, Tore Hägglund & Karl Johan Åström, 2018, In : Control Engineering Practice. 73, p. 124–133

    Research output: Contribution to journalArticle

  3. The Tracking Ratio Station

    Tore Hägglund, 2017 Dec, In : Control Engineering Practice. 69, p. 122-130 9 p.

    Research output: Contribution to journalArticle

  4. Asymmetric relay autotuning - Practical features for industrial use

    Josefin Berner, Tore Hägglund & Karl Johan Åström, 2016 Sep, In : Control Engineering Practice. 54, p. 231-245 15 p.

    Research output: Contribution to journalArticle

  5. Control-Based Load-Balancing Techniques: Analysis and Performance Evaluation via a Randomized Optimization Approach

    Alessandro Vittorio Papadopoulos, Cristian Klein, Martina Maggio, Jonas Dürango, Manfred Dellkrantz, Francisco Hernandez-Rodriguez, Erik Elmroth & Karl-Erik Årzén, 2016 Jul, In : Control Engineering Practice. 52, July, p. 24-34 11 p.

    Research output: Contribution to journalArticle

  6. Frequency-Domain Iterative Learning Control of a Marine Vibrator

    Olof Sörnmo, Bo Bernhardsson, Olle Kröling, Per Gunnarsson & Rune Tenghamn, 2016, In : Control Engineering Practice. 47, p. 70-80

    Research output: Contribution to journalArticle

  7. Measurement noise filtering for common PID tuning rules

    Vanessa Romero Segovia, Tore Hägglund & Karl Johan Åström, 2014, In : Control Engineering Practice. 32, p. 43-63

    Research output: Contribution to journalArticle

  8. Estimation-based ILC applied to a parallel kinematic robot

    Johanna Wallén Axehill, Isolde Dressler, Svante Gunnarsson, Anders Robertsson & Mikael Norrlöf, 2014, In : Control Engineering Practice. 33, p. 1-9

    Research output: Contribution to journalArticle

  9. A Unified Discussion on Signal Filtering in PID Control

    Tore Hägglund, 2013, In : Control Engineering Practice. 21, 8, p. 994-1006

    Research output: Contribution to journalArticle

  10. Control of recompression HCCI with a three region switching controller

    Hsien-Hsin Liao, Anders Widd, Nikhil Ravi, Adam F. Jungkunz, Jun-Mo Kang & J. Christian Gerdes, 2013, In : Control Engineering Practice. 21, 2, p. 135-145

    Research output: Contribution to journalArticle

  11. A distributed accelerated gradient algorithm for distributed model predictive control of a hydro power valley

    Minh Dang Doan, Pontus Giselsson, Tamás Keviczky, Bart De Schutter & Anders Rantzer, 2013, In : Control Engineering Practice. 21, 11, p. 1594-1605

    Research output: Contribution to journalArticle

  12. Model predictive control of HCCI using variable valve actuation and fuel injection

    Nikhil Ravi, Hsien-Hsin Liao, Adam F. Jungkunz, Anders Widd & J. Christian Gerdes, 2012, In : Control Engineering Practice. 20, 4, p. 421-430

    Research output: Contribution to journalArticle

  13. Application of multivariate virtual reference feedback tuning for wastewater treatment plant control

    Jose David Rojas, Xavier Flores, Ulf Jeppsson & Ramon Vilanova, 2012, In : Control Engineering Practice. 20, 5, p. 499-510

    Research output: Contribution to journalArticle

  14. Cascade control of the friction stir welding process to seal canisters for spent nuclear fuel

    Lars Cederqvist, Olof Garpinger, Tore Hägglund & Anders Robertsson, 2012, In : Control Engineering Practice. 20, 1, p. 35-48

    Research output: Contribution to journalArticle

  15. A shape-analysis approach for diagnosis of stiction in control valves

    Tore Hägglund, 2011, In : Control Engineering Practice. 19, 8, p. 782-789

    Research output: Contribution to journalArticle

  16. Self-tuning gross heat release computation for internal combustion engines

    Per Tunestål, 2009, In : Control Engineering Practice. 17, 4, p. 518-524

    Research output: Contribution to journalArticle

  17. Improved web break strategy using a new approach for steam pressure control in paper machines

    Jenny Ekvall & Tore Hägglund, 2008, In : Control Engineering Practice. 16, 10, p. 1151-1160

    Research output: Contribution to journalArticle

  18. Interactive tool for analysis of time-delay systems with dead-time compensators

    Jose Luis Guzman, Pedro Garcia, Tore Hägglund, Sebastian Dormido, Pedro Albertos & Manuel Berenguel, 2008, In : Control Engineering Practice. 16, 7, p. 824-835

    Research output: Contribution to journalArticle

  19. Bioreactor control using a probing feeding strategy and mid-ranging control

    Stéphane Velut, Lena de Maré & Per Hagander, 2007, In : Control Engineering Practice. 15, 2, p. 135-147

    Research output: Contribution to journalArticle

  20. Modeling and control of a novel heat exchange reactor, the Open Plate Reactor

    Staffan Haugwitz, Per Hagander & T. Noren, 2007, In : Control Engineering Practice. 15, 7, p. 779-792

    Research output: Contribution to journalArticle

  21. Dynamic evaluation of integrated control strategies for enhanced nitrogen removal in activated sludge processes

    M. Yong, P. Yongzhen & Ulf Jeppsson, 2006, In : Control Engineering Practice. 14, 11, p. 1269-1278

    Research output: Contribution to journalArticle

  22. Industrial implementation of on-line performance monitoring tools

    Tore Hägglund, 2005, In : Control Engineering Practice. 13, 11, p. 1383-1390

    Research output: Contribution to journalArticle

  23. Control Of GDI Engines using Torque Feedback Exemplified by Simulations

    Magnus Gäfvert, Karl-Erik Årzén, Lars Malcolm Pedersen & Bo Bernhardsson, 2004, In : Control Engineering Practice. 12, 2, p. 165-180

    Research output: Contribution to journalArticle

  24. A novel method for mixture viscosity control based on change detection

    T Svantesson & Gustaf Olsson, 2004, In : Control Engineering Practice. 12, 1, p. 11-22

    Research output: Contribution to journalArticle

  25. Benchmarking combined biological phosphorus and nitrogen removal wastewater treatment processes

    Krist Gernaey & S B Jørgensen, 2004, In : Control Engineering Practice. 12, 3, p. 357-373

    Research output: Contribution to journalArticle

  26. Cylinder air/fuel ratio estimation using net heat release data

    Per Tunestål & J. Karl Hedrick, 2003, In : Control Engineering Practice. 11, 3, p. 311-318

    Research output: Contribution to journalArticle

  27. Robust tuning procedures of dead-time conpensating controllers

    Ari Ingimundarson & Tore Hägglund, 2001, In : Control Engineering Practice. 9, 11, p. 1195-1208

    Research output: Contribution to journalArticle

  28. The future of PID control

    Karl Johan Åström & Tore Hägglund, 2001, In : Control Engineering Practice. 9, 11, p. 1163-1175

    Research output: Contribution to journalArticle

  29. The Blend station - a new ratio control structure

    Tore Hägglund, 2001, In : Control Engineering Practice. 9, 11, p. 1215-1220

    Research output: Contribution to journalArticle

  30. Probing Control of Fed-batch Cultures: Analysis and Tuning

    Mats Åkesson, Per Hagander & Jan Peter Axelsson, 2001, In : Control Engineering Practice. 9, 7, p. 709-723

    Research output: Contribution to journalArticle

  31. A Flexible Interactive Environment for Embedded Controllers

    Johan Eker & Anders Blomdell, 2000, In : Control Engineering Practice. 8, 2, p. 139-146

    Research output: Contribution to journalArticle

  32. A Feedback Scheduler for Real-Time Controller Tasks

    Johan Eker, Per Hagander & Karl-Erik Årzén, 2000, In : Control Engineering Practice. 8, 12, p. 1369-1378

    Research output: Contribution to journalArticle

  33. Automatic Detection of Sluggish Control Loops

    Tore Hägglund, 1999, In : Control Engineering Practice. 7, 12, p. 1505-1511

    Research output: Contribution to journalArticle

  34. Physical system modeling with Modelica

    Hilding Elmqvist, Martin. Otter & Sven Erik Mattsson, 1998, In : Control Engineering Practice. 6, p. 501-510

    Research output: Contribution to journalArticle

  35. Implementation Aspects of the PLC standard IEC 1131-3

    Karl-Erik Årzén, Martin Öhman & Stefan Johansson, 1998, In : Control Engineering Practice. 6, p. 547-555

    Research output: Contribution to journalArticle

  36. Detection and Diagnosis of Oscillation in Control Loops

    N. F. Thornhill & Tore Hägglund, 1997, In : Control Engineering Practice. 5, 10, p. 1343-1354

    Research output: Contribution to journalArticle

  37. An Industrial Dead-Time Compensating PI Controller

    Tore Hägglund, 1996, In : Control Engineering Practice. 4, p. 749-756

    Research output: Contribution to journalArticle

  38. Integrated Control and Diagnosis of Sequential Processes

    Karl-Erik Årzén, 1996, In : Control Engineering Practice. 4, 9

    Research output: Contribution to journalArticle

  39. A Control-Loop Performance Monitor

    Tore Hägglund, 1995, In : Control Engineering Practice. 3, 11, p. 1543-1551

    Research output: Contribution to journalArticle

  40. Fuzzy Anti-Reset Windup for PID Controllers

    Anders Hansson, J. Tödtli & P. Gruber, 1994, In : Control Engineering Practice. 2, 3, p. 389-396

    Research output: Contribution to journalArticle

  41. Automatic Tuning and Adaptation for PID Controllers: A Survey

    Karl Johan Åström, Tore Hägglund, Chang C. Hang & Weng Kuen Ho, 1993, In : Control Engineering Practice. 1, 4, p. 699-714

    Research output: Contribution to journalArticle

  42. Autonomous Controllers

    Karl Johan Åström, 1993, In : Control Engineering Practice. 1, 2, p. 227-232

    Research output: Contribution to journalArticle

  43. Debate/Note/Editorial
  44. The COST benchmark simulation model - current state and future perspective

    Ulf Jeppsson & MN Pons, 2004, In : Control Engineering Practice. 12, 3, p. 299-304

    Research output: Contribution to journalDebate/Note/Editorial

  45. Review (Book/Film/Exhibition/etc.)
  46. Book review: Control systems with input and output constraints, by A.H. Glattfelder and W. Schaufelberger

    Tore Hägglund, 2005, In : Control Engineering Practice. 13, 1, p. 131-131

    Research output: Contribution to journalReview (Book/Film/Exhibition/etc.)