Heat Recovery Systems and CHP, 1359-4311

Journal

More filtering options
  1. 2020
  2. On the effects of increased coolant temperatures of light duty engines on waste heat recovery

    Singh, V., Rijpkema, J. J., Munch, K., Andersson, S. B. & Sebastian Verhelst, 2020 May 25, In : Applied Thermal Engineering. 172, 115157.

    Research output: Contribution to journalArticle

  3. Partially premixed combustion optimization using double injection strategy in transient operation

    Yang, T., Yin, L., Meng, X., Tian, H., Long, W. & Per Tunestål, 2020 Mar 25, In : Applied Thermal Engineering. 169, 114963.

    Research output: Contribution to journalArticle

  4. A network model and numerical simulations of flow distributions in packed bed reactors with different packing structures

    Wang, J., Yang, J., Bengt Sundén & Wang, Q., 2020, In : Applied Thermal Engineering. 172, 115141.

    Research output: Contribution to journalArticle

  5. A novel technique for detailed and time-efficient combustion modeling of fumigated dual-fuel internal combustion engines

    Decan, G., Lucchini, T., D'Errico, G. & Sebastian Verhelst, 2020, In : Applied Thermal Engineering. 174, 115224.

    Research output: Contribution to journalArticle

  6. 2019
  7. Investigation on bluff-body and swirl stabilized flames near lean blowoff with PIV/PLIF measurements and LES modelling

    Guo, S., Wang, J., Zhang, W., Lin, B., Wu, Y., Senbin Yu, Li, G., Hu, Z. & Huang, Z., 2019 Sep, In : Applied Thermal Engineering. 160, 114021.

    Research output: Contribution to journalArticle

  8. Performance and emissions of a series hybrid vehicle powered by a gasoline partially premixed combustion engine

    García, A., Monsalve-Serrano, J., Sari, R., Dimitrakopoulos, N., Martin Tunér & Per Tunestål, 2019 Mar 5, In : Applied Thermal Engineering. 150, p. 564-575 12 p.

    Research output: Contribution to journalArticle

  9. A numerical prediction on heat transfer characteristics from a circular tube in supercritical fluid crossflow

    Xie, J., Yan, H., Bengt Sundén & Xie, G., 2019, In : Applied Thermal Engineering. 153, p. 692-703 12 p.

    Research output: Contribution to journalArticle

  10. Effect of EGR routing on efficiency and emissions of a PPC engine

    Dimitrakopoulos, N., Belgiorno, G., Martin Tunér, Per Tunestål & Di Blasio, G., 2019, In : Applied Thermal Engineering. 152, p. 742-750 9 p.

    Research output: Contribution to journalArticle

  11. Heat transfer and flow structure in a detached latticework duct

    Du, W., Luo, L., Wang, S., Liu, J. & Bengt Sunden, 2019, In : Applied Thermal Engineering. 155, p. 24-39 16 p.

    Research output: Contribution to journalArticle

  12. Investigation on a high-stratified direct injection spark ignition (DISI) engine fueled with methanol under a high compression ratio

    Li, Y., Xue Song Bai, Martin Tunér, Im, H. G. & Johansson, B., 2019, In : Applied Thermal Engineering. 148, p. 352-362 11 p.

    Research output: Contribution to journalArticle

  13. Numerical investigation on flow and thermal performance of supercritical CO 2 in horizontal cylindrically concaved tubes

    Li, Y., Sun, F., Xie, G., Bengt Sunden & Qin, J., 2019, In : Applied Thermal Engineering. 153, p. 655-668 14 p.

    Research output: Contribution to journalArticle

  14. 2018
  15. Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine

    Shamun, S., Belgiorno, G., Di Blasio, G., Beatrice, C., Martin Tunér & Per Tunestål, 2018 Dec 25, In : Applied Thermal Engineering. 145, p. 444-452 9 p.

    Research output: Contribution to journalArticle

  16. Effects of a pocket cavity on heat transfer and flow characteristics of the endwall with a bluff body in a gas turbine engine

    Liu, J., Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2018 Oct 1, In : Applied Thermal Engineering. 143, p. 935-946 12 p.

    Research output: Contribution to journalArticle

  17. Start of low temperature reactions detection based on motoring pressure prediction for partially premixed combustion

    Cheng Fang, Ouyang, M., Yin, L., Per Tunestal, Yang, F. & Yang, X., 2018 Aug 1, In : Applied Thermal Engineering. 141, p. 1101-1109 9 p.

    Research output: Contribution to journalArticle

  18. Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel

    Luo, L., Chen, Q., Du, W., Wang, S., Bengt Sundén & Zhang, X., 2018 Jul 25, In : Applied Thermal Engineering. 140, p. 166-179 14 p.

    Research output: Contribution to journalArticle

  19. Application of fractal theory in the arrangement of truncated ribs in a rectangular cooling channel (4: 1) of a turbine blade

    Liu, J., Wang, J., Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2018 Jul 5, In : Applied Thermal Engineering. 139, p. 488-505 18 p.

    Research output: Contribution to journalArticle

  20. Effects of the position of a bluff-body on the diffusion flames: A combined experimental and numerical study

    Tong, Y., Liu, X., Chen, S., Zhongshan Li & Jens Klingmann, 2018 Feb 25, In : Applied Thermal Engineering. 131, p. 507-521 15 p.

    Research output: Contribution to journalArticle

  21. Influence of spatial and temporal distribution of Turbulent Kinetic Energy on heat transfer coefficient in a light duty CI engine operating with Partially Premixed Combustion

    Tanov, S., Pachano, L., Öivind Andersson, Wang, Z., Mattias Richter, Pastor, J. V., García-Oliver, J. M. & García, A., 2018 Jan 25, In : Applied Thermal Engineering. 129, p. 31-40 10 p.

    Research output: Contribution to journalArticle

  22. The feasibility of mode control in rotating detonation engine

    Deng, Y-L., Ma, H., Xu, C., Liu, X. & Zhou, C., 2018 Jan 25, In : Applied Thermal Engineering. 129, p. 1538-1550 13 p.

    Research output: Contribution to journalArticle

  23. Parametric analysis on throttling components of multi-stage high pressure reducing valve

    Hou, C. W., Qian, J. Y., Chen, F. Q., Jiang, W. K. & Jin, Z., 2018 Jan 5, In : Applied Thermal Engineering. 128, p. 1238-1248 11 p.

    Research output: Contribution to journalArticle

  24. Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs

    Wang, J., Liu, J., Lei Wang, Bengt Sundén & Wang, S., 2018 Jan, In : Applied Thermal Engineering. 129, p. 1369-1381

    Research output: Contribution to journalArticle

  25. 2017
  26. Heat transfer and turbulent flow characteristics over pocket cavity in the junction part of an outlet guide vane in a gas turbine

    Liu, J., Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2017 Sep 1, In : Applied Thermal Engineering. 124, p. 831-843 13 p.

    Research output: Contribution to journalArticle

  27. Computational optimization of counter-flow double-layered microchannel heat sinks subjected to thermal resistance and pumping power

    Shen, H-M., Jin, X., Zhang, F., Xie, G., Bengt Sunden & Yan, H., 2017 Jul 5, In : Applied Thermal Engineering. 121, p. 180-189 10 p.

    Research output: Contribution to journalArticle

  28. Influence of the upstream slot geometry on the endwall cooling and phantom cooling of vane suction side surface

    Du, K., Li, Z., Li, J. & Bengt Sunden, 2017 Jul 5, In : Applied Thermal Engineering. 121, p. 688-700 13 p.

    Research output: Contribution to journalArticle

  29. Flow pattern and heat transfer past two tandem arranged cylinders with oscillating inlet velocity

    Liu, J., Xie, G. & Bengt Sundén, 2017 Jun 25, In : Applied Thermal Engineering. 120, p. 614-625 12 p.

    Research output: Contribution to journalArticle

  30. A novel optimization framework for designing multi-stream compact heat exchangers and associated network

    Wang, Z., Bengt Sundén & Li, Y., 2017 Apr 1, In : Applied Thermal Engineering. 116, p. 110-125 16 p.

    Research output: Contribution to journalArticle

  31. On the solar receiver thermal enhancement by using the dimple combined with delta winglet vortex generator

    Lei, L., Wen, F., Lei Wang, Bengt Sundén & Wang, S., 2017 Jan 25, In : Applied Thermal Engineering. 111, p. 586-598 13 p.

    Research output: Contribution to journalArticle

  32. 2016
  33. Investigation on thermal and thermomechanical performances of actively cooled corrugated sandwich structures

    Xie, G., Wang, C., Ji, T. & Bengt Sunden, 2016 Jun 25, In : Applied Thermal Engineering. 103, p. 660-669 10 p.

    Research output: Contribution to journalArticle

  34. 2015
  35. A comparative study of different burning time models for the combustion of aluminum dust particles

    Bidabadi, M., Poorfar, A. K., Wang, S. & Bengt Sundén, 2015 May 25, In : Applied Thermal Engineering. 105, p. 474–482

    Research output: Contribution to journalArticle

  36. Heat transfer and pressure drop in a smooth and ribbed turn region of a two-pass channel

    Wang, C., Lei Wang & Bengt Sundén, 2015, In : Applied Thermal Engineering. 85, p. 225-233

    Research output: Contribution to journalArticle

  37. Influence of phase change on self-pressurization in cryogenic tanks under microgravity

    Fu, J., Bengt Sundén, Chen, X. & Huang, Y., 2015, In : Applied Thermal Engineering. 87, p. 225-233

    Research output: Contribution to journalArticle

  38. 2014
  39. Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

    Xie, G., Zhang, F., Bengt Sundén & Zhang, W., 2014, In : Applied Thermal Engineering. 62, 2, p. 791-802

    Research output: Contribution to journalArticle

  40. Economic optimization design of shell-and-tube heat exchangers by a cuckoo-search-algorithm

    Asadi, M., Song, Y., Bengt Sundén & Xie, G., 2014, In : Applied Thermal Engineering. 73, 1, p. 1032-1040

    Research output: Contribution to journalArticle

  41. Influence of wall ribs on the thermal stratification and self-pressurization in a cryogenic liquid tank

    Fu, J., Bengt Sundén & Chen, X., 2014, In : Applied Thermal Engineering. 73, 2, p. 1421-1431

    Research output: Contribution to journalArticle

  42. Laminar thermal performance of microchannel heat sinks with constructal vertical Y-shaped bifurcation plates

    Li, Y., Zhang, F., Bengt Sundén & Xie, G., 2014, In : Applied Thermal Engineering. 73, 1, p. 185-195

    Research output: Contribution to journalArticle

  43. Preface: Special Issue for the 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control (IWHT2013)

    Wang, Q-W., Bengt Sundén, Chen, Y., Guo, Z. & Stehlik, P., 2014, In : Applied Thermal Engineering. 73, 2, p. 1401-1401

    Research output: Contribution to journalDebate/Note/Editorial

  44. 2013
  45. A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs

    Xie, G., Zheng, S., Zhang, W. & Bengt Sundén, 2013, In : Applied Thermal Engineering. 61, 2, p. 289-300

    Research output: Contribution to journalArticle

  46. A performance analysis of porous graphite foam heat exchangers in vehicles

    Lin, W., Bengt Sundén & Yuan, J., 2013, In : Applied Thermal Engineering. 50, 1, p. 1201-1210

    Research output: Contribution to journalArticle

  47. Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger

    Zeng, M., Ma, T., Bengt Sundén, Trabia, M. B. & Wang, Q., 2013, In : Applied Thermal Engineering. 50, 1, p. 886-895

    Research output: Contribution to journalArticle

Previous 1 2 Next