Numerical Heat Transfer Part A: Applications, 1040-7782

Journal

More filtering options
  1. 2019
  2. Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct

    Luo, L., Yan, H., Yang, S., Wei Du, Wang, S., Bengt Sunden & Zhang, X., 2019 Feb 4, In : Numerical Heat Transfer; Part A: Applications. 74, 10, p. 1611-1635 25 p.

    Research output: Contribution to journalArticle

  3. Analysis of heat and mass transport characteristics in anode-supported solid oxide fuel cells at various operating conditions

    Shen, Q., Li, S., Yang, G., Huang, N., Yuan, J. & Bengt Sundén, 2019, In : Numerical Heat Transfer; Part A: Applications. 75, 8, p. 509-522 14 p.

    Research output: Contribution to journalArticle

  4. A numerical framework for heat transfer and pressure loss estimation of matrix cooling geometry in stationary and rotational states

    Hosseinalipour, S. M., Afkari, P., Shahbazian, H. & Bengt Sundén, 2019, In : Numerical Heat Transfer; Part A: Applications. 76, 5, p. 348-368

    Research output: Contribution to journalArticle

  5. Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel

    Ye, L., Yang, X., Bengt Sunden & Feng, Z., 2019, In : Numerical Heat Transfer; Part A: Applications. 75, 5, p. 291-308 18 p.

    Research output: Contribution to journalArticle

  6. Heat transfer and flow structure in a rotating duct with detached pin fins

    Wei Du, Luo, L., Wang, S., Jian Liu & Bengt Sunden, 2019, In : Numerical Heat Transfer; Part A: Applications. 75, 4, p. 217-241 25 p.

    Research output: Contribution to journalArticle

  7. Large eddy simulation of turbulent flow and heat transfer in outward transverse and helically corrugated tubes

    Wang, W., Zhang, Y., Jian Liu, Li, B. & Bengt Sundén, 2019, In : Numerical Heat Transfer; Part A: Applications. 75, 7, p. 456-468 13 p.

    Research output: Contribution to journalArticle

  8. 2018
  9. Entropy generation analysis of fully-developed turbulent heat transfer flow in inward helically corrugated tubes

    Wang, W., Zhang, Y., Jian Liu, Zan Wu, Li, B. & Bengt Sundén, 2018 Jun 3, In : Numerical Heat Transfer; Part A: Applications. 73, 11, p. 788-805 18 p.

    Research output: Contribution to journalArticle

  10. Influence of the pressure side injection slot on the cooling performance of endwall surface

    Du, K., Li, Z., Li, J. & Bengt Sunden, 2018 Apr 18, In : Numerical Heat Transfer; Part A: Applications. 73, 8, p. 517-534 18 p.

    Research output: Contribution to journalArticle

  11. Flow structure and heat transfer characteristics of a 90°-turned pin-finned wedge duct with dimples at different locations

    Luo, L., Du, W., Wang, S., Bengt Sunden & Zhang, X., 2018 Feb 1, In : Numerical Heat Transfer; Part A: Applications. 73, 3, p. 143-162 20 p.

    Research output: Contribution to journalArticle

  12. A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube

    Qian, J. Y., Chen, M. R., Zan Wu, Liu, X. L., Jin, Z. J. & Bengt Sundén, 2018, In : Numerical Heat Transfer; Part A: Applications. 73, 8, p. 565-582

    Research output: Contribution to journalArticle

  13. Surface temperature reduction by using dimples/protrusions in a realistic turbine blade trailing edge

    Luo, L., Qiu, D., Wei Du, Bengt Sundén, Wang, Z. & Zhang, X., 2018, In : Numerical Heat Transfer; Part A: Applications. 74, 5, p. 1265-1283

    Research output: Contribution to journalArticle

  14. 2017
  15. Two-phase flow simulation of mist film cooling with deposition for various boundary conditions

    Wang, J., Li, Q. Q., Bengt Sundén, Baleta, J. & Vujanović, M., 2017 May 3, In : Numerical Heat Transfer; Part A: Applications. 71, 9, p. 895-909 15 p.

    Research output: Contribution to journalArticle

  16. CFD analysis of two types of welded plate heat exchangers

    Luan, H. B., Kuang, J. P., Z. Cao, Z. Wu, Tao, W. Q. & B. Sundén, 2017 Feb, In : Numerical Heat Transfer; Part A: Applications. 71, 3, p. 250-269

    Research output: Contribution to journalArticle

  17. 2016
  18. Effects of deposition locations on film cooling with and without a mist injection

    Wang, J., Cui, P., Bengt Sundén & Yang, R., 2016 Nov, In : Numerical Heat Transfer; Part A: Applications. 70, 10, p. 1072-1086 15 p.

    Research output: Contribution to journalArticle

  19. Effects of deposition height and width on film cooling

    Wang, J., Cui, P., Bengt Sundén & Vujanović, M., 2016 Sep 16, In : Numerical Heat Transfer; Part A: Applications. 70, 6, p. 673-687 15 p.

    Research output: Contribution to journalArticle

  20. Parametric influence on convective heat transfer for an outlet guide vane

    Luo, L., Wang, C., Lei Wang, Bengt Sundén & Wang, S., 2016 Aug 17, In : Numerical Heat Transfer; Part A: Applications. 70, 4, p. 331-346 16 p.

    Research output: Contribution to journalArticle

  21. Computational optimization of the internal cooling passages of a guide vane by a gradient-based algorithm

    Xie, G., Song, Y. & Bengt Sundén, 2016 Apr 30, In : Numerical Heat Transfer; Part A: Applications. 69, 12, p. 1311-1331 21 p.

    Research output: Contribution to journalArticle

  22. Analysis of micro-channel heat sinks with rectangular-shaped flow obstructions

    Xie, G., Li, Y., Zhang, F. & Bengt Sundén, 2016, In : Numerical Heat Transfer Part A: Applications. 69, 4, p. 335-351

    Research output: Contribution to journalArticle

  23. Heat transfer and friction factor performance in a pin fin wedge duct with different dimple arrangements

    Lei, L., Wang, C., Lei Wang, Bengt Sundén & Wang, S., 2016, In : Numerical Heat Transfer Part A: Applications. 69, 2, p. 209-226

    Research output: Contribution to journalArticle

  24. 2015
  25. Constructal Parallel-Flow and Counterflow Microchannel Heat Sinks with Bifurcations

    Zhang, F., Bengt Sundén, Zhang, W. & Xie, G., 2015, In : Numerical Heat Transfer Part A: Applications. 68, 10, p. 1087-1105

    Research output: Contribution to journalArticle

  26. 2014
  27. On the Improvement of the Poor Heat Transfer Lee-Side Regions of Square Cross-Section Ribbed Channels.

    Zheng, S., Ji, T., Xie, G. & Bengt Sundén, 2014, In : Numerical Heat Transfer Part A: Applications. 66, 9, p. 963-989

    Research output: Contribution to journalArticle

  28. Spiral Coil Inserts for Heat Transfer Enhancement in a Parallel-plate Channel

    Leng, X-L., Zhang, G-M., Tang, Y-F., Luo, L-C., Zan Wu, Ma, L-X. & Li, W., 2014, In : Numerical Heat Transfer Part A: Applications. 66, 7, p. 756-772

    Research output: Contribution to journalArticle

  29. 2013
  30. Numerical Analysis of Flow and Thermal Performance of Liquid-Cooling Microchannel Heat Sinks with Bifurcation

    Xie, G., Chen, Z., Bengt Sundén & Zhang, W., 2013, In : Numerical Heat Transfer Part A: Applications. 64, 11, p. 902-919

    Research output: Contribution to journalArticle

  31. 2009
  32. Enhanced Internal Heat Transfer on the Tip-Wall in a Rectangular Two-Pass Channel (AR=1:2) by Pin-Fin Arrays

    Xie, G., Bengt Sundén, Wang, L. & Utriainen, E., 2009, In : Numerical Heat Transfer Part A: Applications. 55, 8, p. 739-761

    Research output: Contribution to journalArticle

  33. 2006
  34. 2004
  35. Three-dimensional analysis of two-phase flow and its effects on the cell performance of PEMFC

    Yuan, J., Bengt Sundén, Hou, M. & Zhang, HM., 2004, In : Numerical Heat Transfer Part A: Applications. 46, 7, p. 669-694

    Research output: Contribution to journalArticle

  36. 2003
  37. A numerical investigation of gas flow and heat transfer in proton exchange membrane fuel cells

    Yuan, J., Rokni, M. & Bengt Sundén, 2003, In : Numerical Heat Transfer Part A: Applications. 44, 3, p. 255-280

    Research output: Contribution to journalArticle

  38. Combined mass suction and buoyancy effects on heat transfer and gas flow in a fuel cell duct

    Yuan, J., Rokni, M. & Bengt Sundén, 2003, In : Numerical Heat Transfer Part A: Applications. 43, 4, p. 341-366

    Research output: Contribution to journalArticle

  39. 2001
  40. 1997
  41. A numerical study of two-dimensional compaction, flow and dispersion in a chromatographic column

    Östergren, K. & Trägårdh, C., 1997, In : Numerical Heat Transfer Part A: Applications. 32, 3, p. 247-265

    Research output: Contribution to journalArticle