SAE International Journal of Engines, 1946-3944

Journal

More filtering options
  1. 2017
  2. Evaluation of Different Turbocharger Configurations for a Heavy-Duty Partially Premixed Combustion Engine

    Erik Svensson, Lianhao Yin, Per Tunestal, Marcus Thern & Martin Tuner, 2017 Sep 4, In : SAE International Journal of Engines. 10, 5, 2017-24-0164.

    Research output: Contribution to journalArticle

  3. Effects of Injection Timing on Fluid Flow Characteristics of Partially Premixed Combustion Based on High-Speed Particle Image Velocimetry

    Mohammad Izadi Najafabadi, Slavey Tanov, Lu Hua Wang, Bart Somers, Bengt Johansson & Nico Dam, 2017 Mar 28, In : SAE International Journal of Engines. 10, 4

    Research output: Contribution to journalArticle

  4. Heat Loss Analysis of a Steel Piston and a YSZ Coated Piston in a Heavy-Duty Diesel Engine Using Phosphor Thermometry Measurements

    Christian Binder, Fahed Abou Nada, Mattias Richter, Andreas Cronhjort & Daniel Norling, 2017 Mar 28, In : SAE International Journal of Engines. 10, 4

    Research output: Contribution to journalArticle

  5. Investigation of Small Pilot Combustion in a Heavy-Duty Diesel Engine

    Carlos Jorques Moreno, Ola Stenlaas & Per Tunestal, 2017 Mar 28, In : SAE International Journal of Engines. 10, 3

    Research output: Contribution to journalArticle

  6. 2016
  7. Exhaust PM Emissions Analysis of Alcohol Fueled Heavy-Duty Engine Utilizing PPC

    Sam Shamun, Mengqin Shen, Bengt Johansson, Martin Tunér, Joakim Pagels, Anders Gudmundsson & Per Tunestål, 2016 Oct 17, In : SAE International Journal of Engines. 9, 4, p. 2142-2152 11 p.

    Research output: Contribution to journalArticle

  8. Parameters Influencing Soot Oxidation Rates in an Optical Diesel Engine

    Yann Gallo, Zheming Li, Mattias Richter & Öivind Andersson, 2016 Oct 17, In : SAE International Journal of Engines. 9, 4, 2016-01-2183.

    Research output: Contribution to journalArticle

  9. Evaluation of Nonlinear Estimation Methods for Calibration of a Heat-Release Model

    Gabriel Ingesson, Lianhao Yin, Rolf Johansson & Per Tunestål, 2016, In : SAE International Journal of Engines. 9, 2, p. 1191-1200

    Research output: Contribution to journalArticle

  10. 2015
  11. Double Compression Expansion Engine Concepts: A Path to High Efficiency

    Nhut Lam, Martin Tunér, Per Tunestål, Andersson Arne, Staffan Lundgren & Bengt Johansson, 2015 Apr 14, In : SAE International Journal of Engines. 8, 4, p. 1562 1578 p., 2015-01-1260.

    Research output: Contribution to journalArticle

  12. A Model-Based Injection-Timing Strategy for Combustion-Timing Control

    Gabriel Ingesson, Lianhao Yin, Rolf Johansson & Per Tunestål, 2015, In : SAE International Journal of Engines. 8, June 2015; 8 (3), p. 1012-1020

    Research output: Contribution to journalArticle

  13. 2014
  14. An In-Cycle based NOx Reduction Strategy using Direct Injection of AdBlue

    Kenan Muric, Ola Stenlåås, Per Tunestål & Bengt Johansson, 2014 Oct 13, In : SAE International Journal of Engines. 7, 4, p. 1984-1996 13 p., 2014-01-2817.

    Research output: Contribution to journalArticle

  15. Study of the Early Flame Development in a Spark-Ignited Lean Burn Four-Stroke Large Bore Gas Engine by Fuel Tracer PLIF

    Rikard Wellander, Joakim Rosell, Mattias Richter, Marcus Aldén, Öivind Andersson, Bengt Johansson, Jeudi Duong & Jari Hyvönen, 2014, In : SAE International Journal of Engines. 7, 2, p. 928-936

    Research output: Contribution to journalArticle

  16. 2013
  17. Comparison of Negative Valve Overlap (NVO) and Rebreathing Valve Strategies on a Gasoline PPC Engine at Low Load and Idle Operating Conditions

    Patrick Borgqvist, Per Tunestål & Bengt Johansson, 2013 Apr 8, In : SAE International Journal of Engines. 6, 1, p. 366-378 13 p., 2013-01-0902.

    Research output: Contribution to journalArticle

  18. 2012
  19. Air-Entrainment in Wall-Jets Using SLIPI in a Heavy-Duty Diesel Engine

    Clement Chartier, Johan Sjoholm, Elias Kristensson, Oivind Andersson, Mattias Richter, Bengt Johansson & Marcus Alden, 2012 Sep 10, In : SAE International Journal of Engines. 5, 4, p. 1684-1692 9 p., 2012-01-1718.

    Research output: Contribution to journalArticle

  20. 2011
  21. Challenges for In-Cylinder High-Speed Two-Dimensional Laser-Induced Incandescence Measurements of Soot

    Johan Sjöholm, Rikard Wellander, Henrik Bladh, Mattias Richter, Per-Erik Bengtsson, Marcus Aldén, Ulf Aronsson, Clement Chartier, Öivind Andersson & Bengt Johansson, 2011, In : SAE International Journal of Engines. 4, 1, p. 1607-1622

    Research output: Contribution to journalArticle

  22. Laser-Induced Phosphorescence and the Impact of Phosphor Coating Thickness on Crank-Angle Resolved Cylinder Wall Temperatures

    Christoph Knappe, Peter Andersson, Martin Algotsson, Mattias Richter, Johannes Lindén, Marcus Aldén, Martin Tunér & Bengt Johansson, 2011, In : SAE International Journal of Engines. 4, 1, p. 1689-1698

    Research output: Contribution to journalArticle

  23. 2010
  24. Analysis of EGR Effects on the Soot Distribution in a Heavy Duty Diesel Engine using Time-Resolved Laser Induced Incandescence

    Ulf Aronsson, Clement Chartier, Öivind Andersson, Bengt Johansson, Johan Sjöholm, Rikard Wellander, Mattias Richter, Marcus Aldén & Paul Miles, 2010, SAE International Journal of Engines, 3, 2, p. 137-155.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  25. 2009
  26. Effects of Different Type of Gasoline Fuels on Heavy Duty Partially Premixed Combustion

    Vittorio Manente, Bengt Johansson, Per Tunestål & William Cannella, 2009 Nov 2, In : SAE International Journal of Engines. 2, 2, p. 71-88 18 p., 2009-01-2668.

    Research output: Contribution to journalArticle

  27. The Effect of Intake Temperature in a Turbocharged Multi Cylinder Engine Operating in HCCI Mode

    Thomas Johansson, Per Tunestål, Bengt Johansson & Hans Aulin, 2009 Sep 13, In : SAE International Journal of Engines. 2, 2, p. 452-466 15 p., 2009-24-0060.

    Research output: Contribution to journalArticle