Department of Mechanical Engineering Sciences

Organisational unit: Department

More filtering options
  1. 2021
  2. Evolution of gradient structured layer on AZ91D magnesium alloy and its corrosion behaviour

    Digvijay Singh, Dudekula A. Basha, Lars Wadsö, Dmytro Orlov, Yoshitaka Matsushita, Alok Singh & Santosh S. Hosmani, 2021 Nov 15, In: Journal of Alloys and Compounds. 882, 160659.

    Research output: Contribution to journalArticle

  3. Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining

    Axel Bjerke, Andrii Hrechuk, Filip Lenrick, Andreas Markström, Henrik Larsson, Susanne Norgren, Rachid M'Saoubi, Thomas Björk & Volodymyr Bushlya, 2021 Nov 15, In: Wear. 484-485, 203991.

    Research output: Contribution to journalArticle

  4. Multimodal ex vivo methods reveal that Gd-rich corrosion byproducts remain at the implant site of biodegradable Mg-Gd screws

    Niccolò Peruzzi, Silvia Galli, Heike Helmholz, Nikolay Kardjilov, Diana Krüger, Henning Markötter, Julian Moosmann, Dmytro Orlov, Zdenka Prgomet, Regine Willumeit-Römer, Ann Wennerberg & Martin Bech, 2021 Sep 30, (E-pub ahead of print) In: Acta Biomaterialia.

    Research output: Contribution to journalArticle

  5. Mobilities of Ti and Fe in disordered TiFe-BCC assessed from new experimental data

    Armin Salmasi, Simon J. Graham, Iain Galbraith, Alexander D. Graves, Martin Jackson, Susanne Norgren, Dikai Guan, Henrik Larsson & Lars Höglund, 2021 Sep 1, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 74, 102300.

    Research output: Contribution to journalArticle

  6. Ab initio modelling of intergranular fracture of nickel containing phosphorus: Interfacial excess properties

    Elin Toijer, Pär Olsson & Pär Olsson, 2021 Aug 16, In: Nuclear Materials and Energy. 28, 10 p., 101055.

    Research output: Contribution to journalArticle

  7. Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations

    Yang Liu, Dongdong Xu, Mathias Agmell, Aylin Ahadi, Jan Eric Stahl & Jinming Zhou, 2021 Aug, In: Journal of Manufacturing Processes. 68, p. 818-833 16 p.

    Research output: Contribution to journalArticle

  8. Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels

    Axel Bjerke, Andrii Hrechuk, Filip Lenrick, Rachid M'Saoubi, Henrik Larsson, Andreas Markström, Thomas Björk, Susanne Norgren, Jan Eric Ståhl & Volodymyr Bushlya, 2021 Jul 18, In: Wear. 477, 203785.

    Research output: Contribution to journalArticle

  9. Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining

    Rebecka Lindvall, Filip Lenrick, Rachid M'Saoubi, Jan Eric Ståhl & Volodymyr Bushlya, 2021 Jul 18, In: Wear. 477, 203824.

    Research output: Contribution to journalArticle

  10. Historical building renovation and PV optimisation towards NetZEB in Sweden

    Jonas Manuel Gremmelspacher, Rafael Campamà Pizarro, Matthijs van Jaarsveld, Henrik Davidsson & Dennis Johansson, 2021 Jul 15, In: Solar Energy. 223, p. 248-260 13 p.

    Research output: Contribution to journalArticle

  11. Characterisation of worn WC tool using STEM-EDS aided by principal component analysis

    Isac Lazar, Rebecka Lindvall, Filip Lenrick, Volodymyr Bushlya & Martin Ek, 2021 Jul 1, In: Journal of Microscopy. 283, 1, p. 64-73 10 p.

    Research output: Contribution to journalArticle

  12. Contrast - a lightweight Python framework for beamline orchestration and data acquisition

    Alexander Björling, Clemens Weninger, Maik Kahnt, Sebastian Kalbfleisch, Ulf Johansson, Simone Sala, Filip Lenrick & Karina Thånell, 2021 Jul 1, In: Journal of Synchrotron Radiation. 28, 4, p. 1253-1260 8 p.

    Research output: Contribution to journalArticle

  13. Input parameters for airborne brake wear emission simulations: A comprehensive review

    Mostafa Rahimi, Daniele Bortoluzzi & Jens Wahlström, 2021 Jul, In: Atmosphere. 12, 7, 871.

    Research output: Contribution to journalArticle

  14. Machinability of Single-phase Materials: Surface integrity and tool wear analysis

    Mike Olsson, 2021 Jun 11, Division of Production and Materials Engineering, Lund University,. 104 p.

    Research output: ThesisDoctoral Thesis (compilation)

  15. Fracture Energy Measurement of Prismatic Plane and Σ2 Boundary in Cemented Carbide

    Max Emmanuel, Oriol Gavalda-Diaz, Giorgio Sernicola, Rachid M’saoubi, Tomas Persson, Susanne Norgren, Katharina Marquardt, T. Ben Britton & Finn Giuliani, 2021 Jun 1, In: JOM. 73, 6, p. 1589–1596 8 p.

    Research output: Contribution to journalArticle

  16. Laser Cladding Treatment for Refurbishing Disc Brake Rotors: Environmental and Tribological Analysis

    Ulf Olofsson, Yezhe Lyu, Anna Hedlund Åström, Jens Wahlström, Senad Dizdar, Ana Paula Gomes Nogueira & Stefano Gialanella, 2021 Jun, In: Tribology Letters. 69, 2, 57.

    Research output: Contribution to journalArticle

  17. PERIDYNAMIC MODELLING OF HARMONIC STRUCTURED MATERIALS UNDER HIGH STRAIN RATE DEFORMATION

    Theodor de Sousa, Aylin Ahadi, Elis Sjögren & Dmytro Orlov, 2021 Mar 11, 14th World Congress on Computational Mechanics (WCCM): ECCOMAS Congress 2020. Scipedia, Vol. 100. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  18. Theoretical and Experimental Aspects of Current and Future Research on NbO2 Thin Film Devices

    Denis Music, Andreas Krause & Pär Olsson, 2021 Feb 23, In: Crystals. 11, 2, 217.

    Research output: Contribution to journalReview article

  19. Atomistic investigation of functionalized polyethylene-alumina interfacial strength and tensile behaviour

    Pär Olsson & Erik Bergvall, 2021 Feb 1, In: Computational Materials Science. 187, 10 p., 110075.

    Research output: Contribution to journalArticle

  20. A finite element analysis (FEA) approach to simulate the coefficient of friction of a brake system starting from material friction characterization

    Gabriele Riva, Francesco Varriale & Jens Wahlström, 2021 Feb, In: Friction. 9, 1, p. 191-200 10 p.

    Research output: Contribution to journalArticle

  21. Non-monotonic evolution of surface roughness in a stainless steel during cold deformation

    Fredrik Ottenklev, Martin Adell & Dmytro Orlov, 2021 Jan 2, In: Materials Science and Engineering A. 799, 140150.

    Research output: Contribution to journalArticle

  22. A comprehensive study on cutting mechanisms and surface integrity of AISI 304 when turning a curved surface

    Jian Weng, Kejia Zhuang, Dongdong Xu, Rachid M’Saoubi & Jinming Zhou, 2021, In: Materials and Manufacturing Processes. 36, 11, p. 1285-1298

    Research output: Contribution to journalArticle

  23. A semi-analytical coupled simulation approach for induction heating

    Maialen Areitioaurtena, Unai Segurajauregi, Ville Akujärvi, Martin Fisk, Iker Urresti & Eneko Ukar, 2021, In: Advanced Modeling and Simulation in Engineering Sciences. 8, 1, 14.

    Research output: Contribution to journalArticle

  24. Fabrication, microstructure, and thermal conductivity of multilayered Cu mesh/AZ31 Mg foil composites

    Fanjin Yao, Guoqiang You, Sheng Zeng, Kaixuan Zhou, Lizhen Peng & Yue Ming, 2021, In: Journal of Materials Research and Technology. 14, p. 1539-1550 12 p.

    Research output: Contribution to journalArticle

  25. Simulation of thermal and mechanical performance of laser cladded disc brake rotors

    Nicholas Athanassiou, Ulf Olofsson, Jens Wahlström & Senad Dizdar, 2021, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticle

  26. Tool wear mechanisms of PcBN in machining Inconel 718: Analysis across multiple length scale

    Volodymyr Bushlya, Filip Lenrick, Axel Bjerke, Hisham Aboulfadl, Mattias Thuvander, Jan Eric Ståhl & Rachid M'Saoubi, 2021, In: CIRP Annals - Manufacturing Technology. 70, 1, p. 73-78 6 p.

    Research output: Contribution to journalArticle

  27. 2020
  28. Recycling of worn out brake pads ‒ impact on tribology and environment

    Yezhe Lyu, Jijie Ma, Anna Hedlund Åström, Jens Wahlström & Ulf Olofsson, 2020 Dec 1, In: Scientific Reports. 10, 1, 8369.

    Research output: Contribution to journalArticle

  29. Special issue editorial: Study of brake wear particle emissions

    Jens Wahlström, 2020 Dec, In: Atmosphere. 11, 12, 1359.

    Research output: Contribution to journalDebate/Note/Editorial

  30. Analysis of manufacturing costs for powder metallurgy (pm) gear manufacturing processes: a case study of a helical drive gear

    Babak Kianian & Carin Andersson, 2020 Nov 3, EcoDesign and Sustainability I : Products, Services, and Business Models. Springer, p. 471-487 17 p. (Sustainable Production, Life Cycle Engineering and Management).

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  31. Airborne wear particle emissions produced during the dyno bench tests with a slag containing semi-metallic brake pads

    Vlastimil Matějka, Guido Perricone, Jozef Vlček, Ulf Olofsson & Jens Wahlström, 2020 Nov, In: Atmosphere. 11, 11, 1220.

    Research output: Contribution to journalArticle

  32. Sintering of Superhard cBN-Based Materials with Ti4WC5

    D. A. Stratiіchuk, K. V. Slipchenko, V. Z. Turkevich, N. M. Belyavina, V. M. Bushlya & J. E. Ståhl, 2020 Nov, In: Journal of Superhard Materials. 42, 6, p. 371-376 6 p.

    Research output: Contribution to journalArticle

  33. Evolution of the Microstructure and Mechanical Properties of cBN-Based Cutting Tools with Silicides Compounds as Binder Phase

    Kateryna Slipchenko, Denys Stratiichuk, Nadezhda Belyavina, Vladimir Turkevich, Volodymyr Bushlya & Jan Eric Stahl, 2020 Oct 12, SPS2020 - Proceedings of the Swedish Production Symposium. Safsten, K. & Elgh, F. (eds.). IOS Press, p. 428-438 11 p. (Advances in Transdisciplinary Engineering; vol. 13).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  34. Screening Environmental Impact Reduction Enabled by Brass Reclamation through Hot Forging Operations

    Jakob Johansson, Anna Furberg & Fredrik Schultheiss, 2020 Oct 12, SPS2020 - Proceedings of the Swedish Production Symposium. Safsten, K. & Elgh, F. (eds.). IOS Press, p. 241-248 8 p. (Advances in Transdisciplinary Engineering; vol. 13).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  35. Influence of cBN content, Al2O3 and Si3N4 additives and their morphology on microstructure, properties, and wear of PCBN with NbN binder

    Yu Rumiantseva, Iu Melnichuk, V. Garashchenko, O. Zaporozhets, V. Turkevich & V. Bushlya, 2020 Oct 1, In: Ceramics International. 46, 14, p. 22230-22238 9 p.

    Research output: Contribution to journalArticle

  36. The evolution of texture and microstructure uniformity in tantalum sheets during asymmetric cross rolling

    Jialin Zhu, Shifeng Liu, Doudou Long, Shiyuan Zhou, Yulong Zhu & Dmytro Orlov, 2020 Oct 1, In: Materials Characterization. 168, 110586.

    Research output: Contribution to journalArticle

  37. Nanotomographic evaluation of precipitate structure evolution in a Mg-Zn-Zr alloy during plastic deformation

    Berit Zeller-Plumhoff, Anna-Lena Robisch, Daniele Pelliccia, Elena Longo, Hanna Slominska, Alexander Hermann, Martin Krenkel, Malte Storm, Yuri Estrin, Regine Willumeit-Römer, Tim Salditt & Dmytro Orlov, 2020 Sep 30, In: Scientific Reports. 10, 1, p. 16101

    Research output: Contribution to journalArticle

Previous 1 2 3 4 5 6 7 8 ...18 Next