Bengt Sundén

Senior Professor, Professor Emeritus, Professor in Heat Transfer, Appointed by Swedish Government 1992, Docent, Honorary Research Associate, PhD, MSc in ME
More filtering options
  1. Numerical study of natural convection for cu and tio 2 nanofluids inside different enclosures

    Sahar A. Abbood, Jin Wang, Zan Wu & Bengt Sundén, 2017, Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer, 2017. Begell House, p. 1403-1418 16 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  2. Thermal assessment for prostheses: State-of-the-art review

    Sahar A. Abbood, Zan Wu & Bengt Sundén, 2017, In: International Journal of Computational Methods and Experimental Measurements. 5, 1, p. 1-12 12 p.

    Research output: Contribution to journalArticle

  3. Numerical study of natural convection for Al2O3 and CuO nanofluids inside different enclosures

    Sahar Abdul Fattah Abood, Zan Wu & Bengt Sundén, 2016 Sep 12, p. 1-4. 4 p.

    Research output: Contribution to conferenceAbstract

  4. NUMERICAL STUDY OF NATURAL CONVECTION FOR Cu AND TiO2 NANOFLUIDS INSIDE DIFFERENT ENCLOSURES

    Sahar Abdul Fattah Abood, Bengt Sundén, Jin Wang & Zan Wu, 2017 May 28, Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer May 28-June 1, 2017, Napoli, Italy: Begell house. p. 1403-1418 15 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  5. Analysis of natural convection of Cu and TiO2nanofluids inside nonconventional enclosures

    Sahar Abdul Fattah Abood, Jin Wang, Zan Wu & Bengt Sundén, 2018 Feb 18, In: Journal of Enhanced Heat Transfer. 25, 4-5, p. 315-332 7 p.

    Research output: Contribution to journalArticle

  6. Engine knock prediction using multi zone model for spark ignition engines

    Abdelhadi Ahmedi, Bengt Sundén, Ola Stenlåås, Rolf Egnell & Fabian Mauss, 2006, ICE. American Society Of Mechanical Engineers (ASME), Vol. 2006. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  7. Analysis of an extended ionization equilibrium in the post-flame gases for spark ignited combustion

    Abdelhadi Ahmedi, F. Mauss & Bengt Sundén, 2004, Proceedings of the 2004 Fall Technical Conference of the ASME Internal Combustion Engine Division. American Society Of Mechanical Engineers (ASME), p. 373-380

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  8. A Condition Monitoring for Collapsing Bubble Mechanism for Sonoluminescence and Sonochemistry

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2015, Journal of Thermal Science and Engineering Apllications, 7, 2, p. 021014-021014-8.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  9. Bubble Power and Ultrasound

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2013, International Journal of Enhanced Research in Science Technology & Engineering, 2, 11, p. 130-134.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  10. Solid Oxide Fuel Cell Auxiliary Power Units for Heavy Duty Trucks

    Ali Kadhim Hadi Alhelfi, Jinliang Yuan & Bengt Sundén, 2012, Proceedings Of The ASME 10th Fuel Cell Science, Engineering, and Technology Conference, 2012. Amer. Soc. Mechanical Engineers, p. 317-325

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  11. THE BOUNDARY INTEGRAL METHOD APPLIED TO NON-SPHERICAL CAVITATION BUBBLE GROWTH AND COLLAPSE CLOSE TO A RIGID BOUNDARY

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2015, ASME 2015 International Mechanical Engineering Congress and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 8A. 6 p. IMECE2015-51687

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  12. Predictions of Temperature and Pressure Fields Due to Collapse of a Bubble in Sulfuric Acid Solution Under Ultrasound

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2014, [Host publication title missing]. Amer. Soc. Mechanical Engineers, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  13. The Cavitation Phenomenon: A Literature Survey

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2014, Transactions of the Wessex Institute. Wessex Institute of Technology, UK, 12 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  14. Design Considerations for Solid Oxide Fuel Cell Auxiliary Power Units for Luxury Passenger Vehicle

    Ali Kadhim Hadi Alhelfi, Jinliang Yuan & Bengt Sundén, 2013, The proceeding of 8th International Conference on Multiphase Flow, 2013. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  15. NUMERICAL INVESTIGATION OF AN OSCILLATING GAS BUBBLE IN AN ULTRASONIC FIELD

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2014. 8 p.

    Research output: Contribution to conferencePaper, not in proceeding

  16. Simulations of Cryogenic Cavitation of Low Temperature Fluids with Thermodynamics Effects

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2015, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9, 1, p. 65-69.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  17. Fluid Dynamics and Thermal Transport of a Gas Bubble in Varying Sound Fields

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2014. 16 p.

    Research output: Contribution to conferencePaper, not in proceeding

  18. Modeling of Spherical Gas Bubble Oscillation in Acoustic Pressure Field

    Ali Kadhim Hadi Alhelfi, Bengt Sundén & Jinliang Yuan, 2013, Proceedings Of The 8th International Conference on Multiphase Flow, 2013. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  19. Thermal Engineering Aspects in Power Systems

    R. Amano & Bengt Sundén, 2008, WIT Press.

    Research output: Book/ReportBook

  20. Special Issue for the Second International Conference on 2016 Next Generation of Wind Energy (ICNGWE)

    Ryo Amano, Bengt Sunden & Ashwani Gupta, 2017, In: Journal of Energy Resources Technology, Transactions of the ASME. 139, 5, 050301.

    Research output: Contribution to journalDebate/Note/Editorial

  21. Three-Dimensional Design Optimization Of An Anode-Supported SOFC Using FEM

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2013, ECS Transactions. ECS, Vol. 57. p. 2485-2494 10 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  22. Comparison of Humidified Hydrogen and Partly Pre-Reformed Natural Gas as Fuel for Solid Oxide Fuel Cells applying Computational Fluid Dynamics

    Martin Andersson, Hironori Nakajima, Tatsumi Kitahara, Akira Shimizu, Takahiro Koshiyama, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2014, In: International Journal of Heat and Mass Transfer. 77, p. 1008-1022

    Research output: Contribution to journalArticle

  23. SOFC Cell Design Optimization Using the Finite Element Method Based CFD Approach

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2014, In: Fuel Cells. 14, 2, p. 177-188

    Research output: Contribution to journalArticle

  24. SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2013, In: Journal of Power Sources. 232, p. 42-54

    Research output: Contribution to journalArticle

  25. Teknikbevakning av stationära fastoxidbränsleceller (SOFC) 2012

    Martin Andersson & Bengt Sundén, 2013, Elforsk. 44 p.

    Research output: Book/ReportReport

  26. Review on Modeling Development for Multiscale Chemical Reactions Coupled Transport Phenomena in Solid Oxide Fuel Cells

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2010, In: Applied Energy. 87, 5, p. 1461-1476

    Research output: Contribution to journalReview article

  27. Simulation of two-phase flow in a heat exchanger distributor application

    Victor Andersson, Martin Holm & Bengt Sundén, 2004, American Society of Mechanical Engineers, Fluids Engineering Division - FED. American Society Of Mechanical Engineers (ASME), Vol. 260. p. 609-616

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  28. 3D modeling of an anode supported SOFC using FEM and LBM

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2014, ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 7th International Conference on Energy Sustainability. American Society Of Mechanical Engineers (ASME), V001T02A001

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  29. Modeling Validation and Simulation of an Anode Supported SOFC including Mass and Heat Transport, Fluid Flow and Chemical Reactions

    Martin Andersson, Jinliang Yuan, Bengt Sundén, Ting Shuai Li & Wei Guo Wang, 2011 Dec 1, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. American Society Of Mechanical Engineers (ASME), p. 317-327 11 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  30. SOFC Modeling Considering Internal Reforming by a Global Kinetics Approach

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2009, Solid Oxide Fuel Cells, Eleventh International Symposium (SOFC XI). Singhal, S. C. & Yokokawa, H. (eds.). Electrochemical Society, Vol. 25. p. 1201-1210 20 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  31. SOFC Modeling at the Cell Scale including Hydorgen and Carbon Monoxide as Electrochemically Active Fuels

    Martin Andersson, Maria Navasa, Jinliang Yuan & Bengt Sundén, 2012, ASME FuelCell. American Society Of Mechanical Engineers (ASME), p. 281-291

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  32. Analysis of Microscopic Anode Structure Effects on an Anode-Supported SOFC Including Knudsen Diffusion

    Martin Andersson, Xinrong Lu, Jinliang Yuan & Bengt Sundén, 2011, SOFC12. ECS, Vol. 35. p. 1799-1809

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  33. Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2011, In: Journal of Fuel Cell Science and Technology. 8, 3

    Research output: Contribution to journalArticle

  34. Dynamic Modeling Of A Solid Oxide Fuel Cell System In Modelica

    Daniel Andersson, E. Aberg, Jinliang Yuan, Bengt Sundén & Jonas Eborn, 2010, Proceedings of the Asme 8th International Conference on Fuel Cell Science, Engineering, and Technology 2010, Vol 2. American Society Of Mechanical Engineers (ASME), Vol. 2. p. 65-72 8 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  35. LTNE approach and simulation for anode-supported SOFCs

    Martin Andersson, Jinliang Yuan, Bengt Sundén & Wei Guo Wang, 2009, [Host publication title missing]. American Society Of Mechanical Engineers (ASME), p. 539-549 11 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  36. Chemical reacting transport phenomena and multiscale models for SOFCs

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2008, Advanced Computational Methods and Experiments in Heat Transfer. Sundén, B. & Brebbia, C. (eds.). WIT Press, Vol. X. p. 69-79 11 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  37. Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2010, FuelCell. American Society Of Mechanical Engineers (ASME), p. 43-54 12 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  38. Review of Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2011, In: International Journal of Energy Research. 35, p. 1340-1350

    Research output: Contribution to journalReview article

  39. Numerical investigation of the drying process of silica gel in supercritical carbon dioxide

    V. Andersson & Bengt Sundén, 2005.

    Research output: Contribution to conferencePaper, not in proceeding

  40. SOFC Cathode Design Optimization using the Finite Element Method

    Martin Andersson, Tingshuai Li & Bengt Sundén, 2014. 8 p.

    Research output: Contribution to conferencePaper, not in proceeding

  41. SOFC modeling considering electrochemical reactions at the TPBs

    Martin Andersson, Jinliang Yuan & Bengt Sundén, 2011, (Submitted). 4 p.

    Research output: Contribution to conferenceAbstract

  42. Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2010, International Green Energy Conference. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  43. SOFC modeling at the cell scale including hydrogen and carbon monoxide as electrochemically active fuels

    Martin Andersson, Maria Navasa, Jinliang Yuan & Bengt Sundén, 2012, ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology Collocated with the ASME 2012 6th International Conference on Energy Sustainability. American Society Of Mechanical Engineers (ASME), p. 281-291 11 p. FuelCell2012-91112

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

Previous 1 2 3 4 5 6 7 8 ...17 Next