Bengt Sundén

Senior Professor, Professor Emeritus, Professor in Heat Transfer, Appointed by Swedish Government 1992, Docent, Honorary Research Associate, PhD, MSc in ME
More filtering options
  1. 2001
  2. Buoyancy Effects on Developing Laminar Gas Flow and Heat Transfer in a Rectangular Fuel Cell Duct

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2001, In: Numerical Heat Transfer Part A: Applications. 39, p. 801-822

    Research output: Contribution to journalArticle

  3. Impingement cooling in a rib-roughened channel with cross-flow

    Rongguang Jia, Masoud Rokni & Bengt Sundén, 2001, In: International Journal of Numerical Methods for Heat & Fluid Flow. 11, 7, p. 642-662

    Research output: Contribution to journalArticle

  4. Simulation of Fully Developed Laminar Heat and Mass Transfer in Fuel Cell Ducts with Different Cross Sections

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2001, In: International Journal of Heat and Mass Transfer. 44, 21, p. 4047-4058

    Research output: Contribution to journalArticle

  5. 2002
  6. Advanced Computational Methods in Heat Transfer VII

    Bengt Sundén & C.A. Brebbia, 2002, WIT Press. (Computational Studies)

    Research output: Book/ReportBook

  7. Analysis of Fluid Flow and Heat Transfer for Proton Exchange Membrane Fuel Cells by an Extended Darcy Model

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2002, Progress in Transport Phenomena. Dost, S. (ed.). p. 837-842

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  8. Analysis of fluid flow and heat transfer in district heating pipelines using the finite element method

    Irina Gabrielaitiene, Bengt Sundén & R. Kacianauskas, 2002, Computational Studies. WIT Press, Vol. 4. p. 13-22

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  9. Analysis of some heat exchanger concepts for use as gas turbine intercoolers

    A Saidi, Daniel Eriksson & Bengt Sundén, 2002, In: International Journal of Heat Exchangers. 3, 2, p. 241-260

    Research output: Contribution to journalArticle

  10. An explicit WET-type model for the turbulent scalar fluxes

    Masoud Rokni & Bengt Sundén, 2002, Advances in Fluid Mechanics. AFM 2002. Fourth International Conference. Rahman, M., Verhoeven, R. & Brebbia, C. A. (eds.). WIT Press, p. 55-64

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  11. A numerical investigation of primary surface rounded cross wavy ducts

    E Utriainen & Bengt Sundén, 2002, In: Heat and Mass Transfer. 38, 7-8, p. 537-542

    Research output: Contribution to journalArticle

  12. Assessment of some turbulence models for slot jet impinging on flat and concave surfaces

    Rongguang Jia, Masoud Rokni & Bengt Sundén, 2002, [Host publication title missing]. American Society Of Mechanical Engineers (ASME)

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  13. Computation of combined turbulent convective and impingement heat transfer

    Bengt Sundén, Rongguang Jia & A. Abdon, 2002, Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria. Mang, H. A., Rammerstorfer, F. G. & Eberhardsteiner, J. (eds.).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  14. Enhancement of the performance of indirect cooling coils for display cabinets,

    Caroline Haglund Stignor, P. Fahlen & Bengt Sundén, 2002, Zero Leakage - Minimum Charge: Efficient Systems for Refrigeration, Air Conditioning and Heat Pumps: proceedings. International Institute of Refrigeration

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  15. Gas Flow and Heat Transfer Modeling of an Anode-Supported Solid Oxide Fuel Cell Duct

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2002, 5th European Solid Oxide Fuel Cell Forum. Huijsmans, J. (ed.). p. 921-928

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  16. Heat release in the end-gas prior to knock in lean, rich and stochiometric mixtures with and without EGR

    B. Grandin, I. Denbratt, Joakim Bood, Christian Brackmann, Per-Erik Bengtsson, Adina Gogan, Fabian Mauss & Bengt Sundén, 2002.

    Research output: Contribution to conferencePaper, not in proceeding

  17. Heat Release in the End-Gas Prior to Knock in Lean, Rich and Stoichiometric Mixtures With and Without Egr

    Börje Grandin, Ingemar Denbratt, Joakim Bood, Christian Brackmann, Per-Erik Bengtsson, Fabian Mauss, Bengt Sundén & Adina Gogan, 2002, In: SAE Technical Papers.

    Research output: Contribution to journalArticle

  18. Heat transfer enhancement in square ducts with V-shaped ribs of various angles

    Rongguang Jia, Arash Saidi & Bengt Sundén, 2002, American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI. American Society Of Mechanical Engineers (ASME), Vol. 3 A. p. 469-476

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  19. Heat transfer measurements of confined multiple impinging slot jets without cross flow effects

    Xiufang Gao & Bengt Sundén, 2002.

    Research output: Contribution to conferencePaper, not in proceeding

  20. Impingement cooling in ribbed ducts due to jet arrays

    Rongguang Jia, Masoud Rokni & Bengt Sundén, 2002.

    Research output: Contribution to conferencePaper, not in proceeding

  21. Improvement of conventional indirect cooling coils for display cabinets – theory and experiments

    Caroline Haglund Stignor, Per Fahlen, Bengt Sundén & Daniel Eriksson, 2002, IIR Commission D1/B1 Supermarket refrigeration. International Institute of Refrigeration

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  22. Laminar Friction Factors and Colburn Factors for Ducts with Advanced Boundary Conditions

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2002, Compact Heat Exchanges. Celata, G. P. (ed.). p. 113-118

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  23. Methods for assessment of heat transfer coefficient in 180o bend by means of CFD for engineering applications

    Sassan Etemad, E. Celik, M. Ewaldsson & Bengt Sundén, 2002, HEFAT2002, Proceedings of the 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. Meyer, J. P. (ed.).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  24. Numerical assessment of different turbulence models for slot jet impinging on flat and concave surfaces

    Rongguang Jia, Masoud Rokni & Bengt Sundén, 2002, American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI. American Society Of Mechanical Engineers (ASME), Vol. 3 B. p. 815-822

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  25. On modelling of thermal radiation properties for biofuels

    Thomas Nilsson & Bengt Sundén, 2002, Computational Studies. WIT Press, Vol. 4. p. 361-371

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  26. On modelling thermal radiation properties for biofuels

    T. Nilsson & Bengt Sundén, 2002, Heat transfer VII : advanced computational methods in heat transfer. Sunden, B. & Brebbia, C. A. (eds.). WIT Press

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  27. On partially corrugated ducts in heat exchangers

    Bengt Sundén, 2002, ASME/IMECE2002 CD-ROM proceedings.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  28. Optimal design of plate heat exchangers

    Lei Wang & Bengt Sundén, 2002.

    Research output: Contribution to conferencePaper, not in proceeding

  29. Parallelization of a multi-blocked multithreaded general CFD code for heat transfer analysis

    Rongguang Jia & Bengt Sundén, 2002, Advances in High Performance Computing. WIT Press, Vol. 7. p. 157-166

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  30. Performance comparison of some tube inserts

    Lieke Wang & Bengt Sundén, 2002, In: International Communications in Heat and Mass Transfer. 29, 1, p. 45-56

    Research output: Contribution to journalArticle

  31. Predictive modelling of heat and mass transfer in hamburger patties

    Dirk Sterner, Bengt Sundén & C. Skjoldebrand, 2002, Seventh International Conference on Advanced Computational Methods in Heat Transfer. Heat Transfer VII. Sundén, B. & Brebbia, C. A. (eds.). WIT Press, Vol. 4. p. 283-292

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  32. Simulation of Gas Flow and Heat Transfer in Proton Exchange Membrane Fuel Cells

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2002, Proceedings of 14th World Hydrogen Energy Conference.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  33. The Influence of Nitric Oxide on the Occurrence of Autoignition in the End Gas of Spark Ignition Engines

    Ola Stenlåås, Rolf Egnell, Adina Gogan, Bengt Sundén & Fabian Mauss, 2002, In: SAE Technical Papers.

    Research output: Contribution to journalArticle

  34. The influence of NO on the occurence of autoignition in the end-gas of SI-engines

    Ola Stenlåås, Adina Gogan, Rolf Egnell, Fabian Mauss & Bengt Sundén, 2002, SAE Paper 2002-01-2699.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  35. 2003
  36. Advances in recuperator technology for gas turbine systems

    A. Muley & Bengt Sundén, 2003.

    Research output: Contribution to conferencePaper, not in proceeding

  37. Analysis of turbulent flow and heat transfer in a square-sectioned U-bend

    Sassan Etemad, Masoud Rokni, Bengt Sundén & O. Daunius, 2003, Turbulence, heat and mass transfer 4 : proceedings of the Fourth International Symposium on Turbulence, Heat and Mass Transfer, Antalya, Turkey, 12 - 17 October, 2003. Hanjalic, K., Nagano, Y. & Tummers, M. (eds.). Begell House, p. 1171-1178

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  38. A numerical investigation of gas flow and heat transfer in proton exchange membrane fuel cells

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2003, In: Numerical Heat Transfer Part A: Applications. 44, 3, p. 255-280

    Research output: Contribution to journalArticle

  39. Combined mass suction and buoyancy effects on heat transfer and gas flow in a fuel cell duct

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2003, In: Numerical Heat Transfer Part A: Applications. 43, 4, p. 341-366

    Research output: Contribution to journalArticle

  40. Detailed thermal and flow fields in a rectangular duct with inclined ribs

    Xiufang Gao, L. Wang & Bengt Sundén, 2003, Compact Heat Exchangers and Enhancement Technology for the Process Industries. Shah, R. K., Deakin, A. W., Honda, H. & Rudy, T. (eds.). Begell House, p. 1-87

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  41. Dynamic modeling of the thermal performance of district heating pipelines

    Irina Gabrielaitiene, Bengt Sundén, R Kacianauskas & B Bohm, 2003, Advances in Heat Transfer Engineering, Proceedings. Begell House, p. 185-192

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  42. Dynamic modelling of thermal performance of district heating pipelines

    Irina Gabrielaitiene, Bengt Sundén, R. Kacianauskas & B. Böhm, 2003, Advances in Heat Transfer Engineering. Sundén, B. & Vilemas, J. (eds.). p. 185-192

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  43. Experimental investigation of the heat transfer characteristics of confined impinging slot jets

    Xiufang Gao & Bengt Sundén, 2003, In: Experimental Heat Transfer. 16, 1, p. 1-18

    Research output: Contribution to journalArticle

  44. Gas Flow and Heat Transfer Analysis for an Anode Duct in Reduced Temperature SOFCs

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2003, Fuel Cell Science, Engineering and Technology. Yuan, J., Rokni, M. & Sundén, B. (eds.). American Society Of Mechanical Engineers (ASME), p. 209-216

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  45. Heat transfer enhancement in square ducts with V-shaped ribs

    Rongguang Jia, A Saidi & Bengt Sundén, 2003, In: Journal of Turbomachinery. 125, 4, p. 788-791

    Research output: Contribution to journalArticle

  46. Investigation of a two-equation turbulent heat transfer model applied to ducts

    Masoud Rokni & Bengt Sundén, 2003, In: Journal of Heat Transfer. 125, 1, p. 194-200

    Research output: Contribution to journalArticle

  47. Knock modeling: an integrated tool for detailed chemistry and engine cycle simulation

    Adina Gogan, Bengt Sundén, L. Montorsi, S.S. Ahmed & Fabian Mauss, 2003, Spark Ignition and Compression Ignition Engines Modeling.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  48. Modeling of two-phase flow in a cathode duct of PEM fuel cells

    Jinliang Yuan, Masoud Rokni & Bengt Sundén, 2003, Fuel Cell Science, Engineering and Technology. American Society Of Mechanical Engineers (ASME), p. 463-470

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

Previous 1 2 3 4 5 6 7 8 ...17 Next