Bengt Sundén

Senior Professor, Professor Emeritus, Professor in Heat Transfer, Appointed by Swedish Government 1992, Docent, Honorary Research Associate, PhD, MSc in ME
More filtering options
  1. 2015
  2. Heat Transfer Correlations for Single-phase Flow, Condensation and Boiling in Microfin Tubes

    Zan Wu, Bengt Sundén, Vishwas Wadekar & Wei Li, 2015, In: Heat Transfer Engineering. 36, 6, p. 582-595

    Research output: Contribution to journalArticle

  3. Influence of phase change on self-pressurization in cryogenic tanks under microgravity

    Juan Fu, Bengt Sundén, Xiaoqian Chen & Yiyong Huang, 2015, In: Applied Thermal Engineering. 87, p. 225-233

    Research output: Contribution to journalArticle

  4. Modeling of a non-periodic boundary condition with entrance and exit in dissipative particle dynamics

    Erik O. Johansson, Toru Yamada, Jinliang Yuan & Bengt Sundén, 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society Of Mechanical Engineers (ASME)

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  5. Modeling of Solid Oxide Fuel Cell with Anisotropic Conductivity

    Min Xu, Martin Andersson, Tingshuai Li & Bengt Sundén, 2015, ECS Transactions. Electrochemical Society, Vol. 68. p. 3003-3011 9 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  6. Numerical Analysis of Constructal Water-Cooled Microchannel Heat Sinks with Multiple Bifurcations in the Entrance Region

    Ruiping Zhang, Zhiyong Chen, Gongnan Xie & Bengt Sundén, 2015, In: Numerical Heat Transfer Part A: Applications. 67, 6, p. 632-650

    Research output: Contribution to journalArticle

  7. Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions

    Jian Liu, Yidan Song, Gongnan Xie & Bengt Sundén, 2015, In: Energy. 79, p. 1-19

    Research output: Contribution to journalArticle

  8. Numerical Modeling of Multiple Bubbles Condensation in Subcooled Flow Boiling

    Zhenyu Liu, Bengt Sundén & Huiying Wu, 2015, In: Journal of Thermal Science and Engineering Apllications. 7, 3, 031003.

    Research output: Contribution to journalArticle

  9. Numerical Simulation of Laminar Film Condensation in a Horizontal Minitube with and Without Non-Condensable Gas by the VOF Method

    Zhan Yin, Yanling Guo, Bengt Sundén, Qiuwang Wang & Min Zeng, 2015, In: Numerical Heat Transfer Part A: Applications. 68, 9, p. 958-977

    Research output: Contribution to journalArticle

  10. On icing and icing mitigation of wind turbine blades in cold climate

    Bengt Sundén & Zan Wu, 2015, In: Journal of Energy Resources Technology. 137, 5, p. 051203-051203-10

    Research output: Contribution to journalArticle

  11. Parameter study of transient carbon deposition effect on the performance of a planar solid oxide fuel cell

    Ting Ma, Min Yan, Min Zeng, Jinliang Yuan, Qiu-yang Chen, Bengt Sundén & Qiu-wang Wang, 2015, In: Applied Energy. 152, p. 217-228

    Research output: Contribution to journalArticle

  12. Performance of heat exchangers using nanofluids

    Bengt Sundén & Zan Wu, 2015, Heat Transfer Enhancement with Nanofluids. Manca, O. (ed.). CRC Press, p. 207-236 30 p.

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  13. Preface: Special Issue for the First International Conference on Next Generation of Wind Energy (ICNGWE), 2014

    Bengt Sundén, Ryo Amano & Ashwani Gupta, 2015, In: Journal of Energy Resources Technology. 137, 5, 050301.

    Research output: Contribution to journalDebate/Note/Editorial

  14. Review on mechanisms and continuum models of multi-phase transport phenomena in porous structures of non-aqueous Li-Air batteries

    Jinliang Yuan, Jong-Sung Yu & Bengt Sundén, 2015, In: Journal of Power Sources. 278, p. 352-369

    Research output: Contribution to journalReview article

  15. Simulations of Cryogenic Cavitation of Low Temperature Fluids with Thermodynamics Effects

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2015, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9, 1, p. 65-69.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  16. THE BOUNDARY INTEGRAL METHOD APPLIED TO NON-SPHERICAL CAVITATION BUBBLE GROWTH AND COLLAPSE CLOSE TO A RIGID BOUNDARY

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2015, ASME 2015 International Mechanical Engineering Congress and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 8A. 6 p. IMECE2015-51687

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  17. 2014
  18. 3D modeling of an anode supported SOFC using FEM and LBM

    Martin Andersson, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2014, ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 7th International Conference on Energy Sustainability. American Society Of Mechanical Engineers (ASME), V001T02A001

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  19. Analysis of Proton Exchange Membrane Fuel Cell Systems Involving Heat Exchangers

    Bengt Sundén & Jinliang Yuan, 2014, In: Heat Transfer Engineering. 35, 6-8, p. 567-575

    Research output: Contribution to journalArticle

  20. Analysis of Self-Pressurization Phenomenon in a Cryogenic Fluid Storage Tank With VOF Method

    Juan Fu, Bengt Sundén & Xiaoqian Chen, 2014, Proceedings of ASME 2013 International Mechanical Engineering Congress and Exposition. American Society Of Mechanical Engineers (ASME), Vol. 1. p. V001T01A020

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  21. An experimental study of heat transfer in the turn region of a U-bend channel with various ribs

    Chenglong Wang, Lei Wang & Bengt Sundén, 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  22. An Experimental Study of Heat Transfer on an Outlet Guide Vane

    Chenglong Wang, Lei Wang, Bengt Sundén, Valery Chernoray & Hans Abrahamsson, 2014, Proceedings of the ASME Turbo Expo: Turbine Technical Conference And Exposition, 2014, Vol 5B. Amer. Soc. Mechanical Engineers, p. V05BT14A001

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  23. A numerical investigation of heat transfer in a smooth bend part of a u-duct

    Tareq Salameh & Bengt Sundén, 2014, International Journal of Numerical Methods for Heat & Fluid Flow, 24, 1, p. 137-147.

    Research output: Contribution to specialist publication or newspaperSpecialist publication article

  24. A Numerical Study of the Thermal Performance of Microchannel Heat Sinks with Multiple Length Bifurcation in Laminar Liquid Flow

    Gongnan Xie, Shian Li, Bengt Sundén, Weihong Zhang & Haibin Li, 2014, In: Numerical Heat Transfer Part A: Applications. 65, 2, p. 107-126

    Research output: Contribution to journalArticle

  25. A review of heat transfer and pressure drop characteristics of single and two-phase microchannels

    Masoud Asadi, Gongnan Xie & Bengt Sundén, 2014, In: International Journal of Heat and Mass Transfer. 79, p. 34-53

    Research output: Contribution to journalReview article

  26. CFD Simulation of Heat Transfer and Pressure Drop in Compact Brazed Plate Heat Exchangers

    Vijaya S. Gullapalli & Bengt Sundén, 2014, In: Heat Transfer Engineering. 35, 4, p. 358-366

    Research output: Contribution to journalArticle

  27. Coarse-grained molecular dynamics investigation of nanostructures and thermal properties of porous anode for solid oxide fuel cell

    Yanfeng Wang, Jinliang Yuan, Bengt Sundén & Yu-Li Hu, 2014, In: Journal of Power Sources. 254, p. 209-217

    Research output: Contribution to journalArticle

  28. Comparison of Humidified Hydrogen and Partly Pre-Reformed Natural Gas as Fuel for Solid Oxide Fuel Cells applying Computational Fluid Dynamics

    Martin Andersson, Hironori Nakajima, Tatsumi Kitahara, Akira Shimizu, Takahiro Koshiyama, Hedvig Paradis, Jinliang Yuan & Bengt Sundén, 2014, In: International Journal of Heat and Mass Transfer. 77, p. 1008-1022

    Research output: Contribution to journalArticle

  29. Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

    Gongnan Xie, Fengli Zhang, Bengt Sundén & Weihong Zhang, 2014, In: Applied Thermal Engineering. 62, 2, p. 791-802

    Research output: Contribution to journalArticle

  30. Constructal Theory Based Geometric Optimization of Wavy Channels in the Low Reynolds Number Regime

    Gongnan Xie, Masoud Asadi, Bengt Sundén & Shaofei Zheng, 2014, In: Journal of Electronic Packaging. 136, 3, 031013.

    Research output: Contribution to journalArticle

  31. Convective condensation inside horizontal smooth and microfin tubes

    Zan Wu, Bengt Sundén, Lei Wang & Wei Li, 2014, In: Journal of Heat Transfer. 136, 5, 051504.

    Research output: Contribution to journalArticle

  32. Coupled simulation approaches for PEM fuel cells by OpenFOAM

    Jiatang Wang, Jinliang Yuan & Bengt Sundén, 2014, (Unpublished).

    Research output: Contribution to conferencePaper, not in proceeding

  33. Design Optimization and Performance Prediction of Compact Heat Exchangers

    Q. Wang, G. Xie & Bengt Sundén, 2014, Emerging Topics in Heat Transfer: Enhancement and Heat Exchangers. Sundén, B., Wang, Q. & Chen, Y. (eds.). WIT Press, p. 301-319

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  34. Diffusive-Ballistic Heat Transport in a Two-Dimensional Square Plate Using Energy Conserving Dissipative Particle Dynamics

    Toru Yamada, Keunhan Park, Yutaka Asako, Mohammad Faghri & Bengt Sundén, 2014, ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology Volume 4: Heat and Mass Transfer Under Extreme Conditions. American Society Of Mechanical Engineers (ASME), Vol. 4. p. V004T14A016

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  35. Economic optimization design of shell-and-tube heat exchangers by a cuckoo-search-algorithm

    Masoud Asadi, Yidan Song, Bengt Sundén & Gongnan Xie, 2014, In: Applied Thermal Engineering. 73, 1, p. 1032-1040

    Research output: Contribution to journalArticle

  36. Effect of Piston Shape and Swirl Ratio on Engine Heat Transfer in a Light-Duty Diesel Engine

    Helgi Fridriksson, Martin Tunér, Öivind Andersson, Bengt Sundén, Håkan Persson & Mattias Ljungqvist, 2014, SAE Technical Papers. SAE, 13 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  37. Effects of the operating voltage on a solid oxide electrolysis cell

    Maria Navasa, Jinliang Yuan & Bengt Sundén, 2014.

    Research output: Contribution to conferencePaper, not in proceeding

  38. Evaluation of Tortuosity in High Porosity Media Using the Lattice Boltzmann Method

    Mayken Espinoza Andaluz, Bengt Sundén & Martin Andersson, 2014.

    Research output: Contribution to conferenceAbstract

  39. Experimental Study of Heat Transfer Characteristics of a Bluff Body Interacting With a Rib by Using Liquid Crystal Thermography

    Zahra Ghorbani-Tari, Lei Wang & Bengt Sundén, 2014, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition Volume 8B: Heat Transfer and Thermal Engineering. American Society Of Mechanical Engineers (ASME), Vol. 8B. p. V08BT09A060

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  40. Flow and thermal performance of graphite foam dimpled fin heat exchangers

    Wamei Lin, Gongnan Xie, Bengt Sundén & Qiuwang Wang, 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  41. Flow structure and heat transfer in a square passage with offset mid-truncated ribs

    Gongnan Xie, Jian Liu, Phillip M. Ligrani & Bengt Sundén, 2014, In: International Journal of Heat and Mass Transfer. 71, p. 44-56

    Research output: Contribution to journalArticle

  42. Fluid Dynamics and Thermal Transport of a Gas Bubble in Varying Sound Fields

    Ali Kadhim Hadi Alhelfi & Bengt Sundén, 2014. 16 p.

    Research output: Contribution to conferencePaper, not in proceeding

  43. Heat Transfer Enhancement of a Gas Turbine Blade-Tip Wall

    G. Xie & Bengt Sundén, 2014, Emerging Topics in Heat Transfer: Enhancement and Heat Exchangers. Sundén, B., Wang, Q. & Chen, Y. (eds.). WIT Press, p. 67-88

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  44. Highlights of Fuel Cell Modeling From a Lattice Boltzmann Method Point of View

    Mayken Espinoza Andaluz, Bengt Sundén & Martin Andersson, 2014, [Host publication title missing]. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

Previous 1...4 5 6 7 8 9 10 11 ...17 Next