Bengt Sundén

Senior Professor, Professor Emeritus, Professor in Heat Transfer, Appointed by Swedish Government 1992, Docent, Honorary Research Associate, PhD, MSc in ME
More filtering options
  1. 2021
  2. A high temperature turbine blade heat transfer multilevel design platform

    Songtao Wang, Shouzuo Li, Lei Luo, Zhiqi Zhao, Wei Du & Bengt Sundén, 2021, In: Numerical Heat Transfer; Part A: Applications. 79, 2, p. 122-145 24 p.

    Research output: Contribution to journalArticle

  3. Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

    Huaduo Gu, Xiaoyu Zhou, Yaping Chen, Jiafeng Wu, Zan Wu, Yunhui Jiang & Bengt Sundén, 2021, In: Energy Conversion and Management. 230, 113822.

    Research output: Contribution to journalArticle

  4. Experimental and numerical investigations of heat transfer and fluid flow in a rectangular channel with perforated ribs

    Jian Liu, Safeer Hussain, Wei Wang, Gongnan Xie & Bengt Sundén, 2021, In: International Communications in Heat and Mass Transfer. 121, 105083.

    Research output: Contribution to journalArticle

  5. Impact of discharge port configurations on the performance of sliding vane rotary compressors with a rotating cylinder

    Huaduo Gu, Yaping Chen, Jiafeng Wu, Yunhui Jiang & Bengt Sundén, 2021, In: Applied Thermal Engineering. 186, 116526.

    Research output: Contribution to journalArticle

  6. On the topology of vortex structures and heat transfer of a gas turbine blade internal tip with different arrangement of delta-winglet vortex generators

    Zhiqi Zhao, Lei Luo, Dandan Qiu, Songtao Wang, Zhongqi Wang & Bengt Sundén, 2021, In: International Journal of Thermal Sciences. 160, 106676.

    Research output: Contribution to journalArticle

  7. Special Section on Flow Physics of Supercritical Fluids in Engineering

    Gongnan Xie, Kamel Hooman, Stavros Tavoularis, Bengt Sunden & Sandra K.S. Boetcher, 2021, In: Journal of Fluids Engineering, Transactions of the ASME. 143, 4, 040301.

    Research output: Contribution to journalDebate/Note/Editorial

  8. Vortical structures and heat transfer augmentation of a cooling channel in a gas turbine blade with various arrangements of tip bleed holes

    Zhiqi Zhao, Lei Luo, Dandan Qiu, Songtao Wang, Zhongqi Wang & Bengt Sundén, 2021, In: Numerical Heat Transfer; Part A: Applications. 79, 1, p. 40-67 28 p.

    Research output: Contribution to journalArticle

  9. 2020
  10. Improvements of the adiabatic film cooling by using two-Row holes of different geometries and arrangements

    Guohua Zhang, Jian Liu, Bengt Sundén & Gongnan Xie, 2020 Dec, In: Journal of Energy Resources Technology, Transactions of the ASME. 142, 12, 122101.

    Research output: Contribution to journalArticle

  11. Endwall film cooling holes design upstream of the leading edge of a turbine vane

    Jian Liu, Wei Du, Safeer Hussain, Gongnan Xie & Bengt Sundén, 2020 Oct 23, In: Numerical Heat Transfer; Part A: Applications.

    Research output: Contribution to journalArticle

  12. Investigation of Heat Transfer Characteristics of Al2O3-Water Nanofluids in an Electric Heater

    Jin Wang, Zhengjia Zhai, Dan Zheng, Li Yang & Bengt Sundén, 2020 Sep 16, In: Heat Transfer Engineering.

    Research output: Contribution to journalArticle

  13. Performance of fuel-air combustion in a reheating furnace at different flowrate and inlet conditions

    Yiwei Liu, Jin Wang, Chunhua Min, Gongnan Xie & Bengt Sundén, 2020 Sep 1, In: Energy. 206, 118206.

    Research output: Contribution to journalArticle

  14. Entropy Study on the Enhanced Heat Transfer Mechanism of the Coupling of Detached and Spiral Vortex Fields in Spirally Corrugated Tubes

    Wei Wang, Kang Fu, Yaning Zhang, Yufei Tan, Bingxi Li & Bengt Sunden, 2020 Aug 3, In: Heat Transfer Engineering.

    Research output: Contribution to journalArticle

  15. Experimental investigation on micromixing characteristics of coaxial mixers in viscous system

    Baoqing Liu, Pengfei Gao, Ning Sun, Yikun Zhang, Zhijiang Jin & Bengt Sunden, 2020 Aug, In: Canadian Journal of Chemical Engineering. 98, 8, p. 1815-1824 10 p.

    Research output: Contribution to journalArticle

  16. Synthesis and experimental study of novel double perovskite Ba2NixCo2−xO6 as promising oxygen carrier materials for CO2 capture application

    Qiuwan Shen, Yuhang Jiang, Shian Li, Xinrong Lv, Guogang Yang & Bengt Sunden, 2020 Jun 25, In: International Journal of Energy Research. 44, 8, p. 6991-6999 9 p.

    Research output: Contribution to journalArticle

  17. Special issue: Smart flow control at the micro scale

    Jin yuan Qian, Junhui Zhang, Zan Wu & Bengt Sunden, 2020 May 8, In: Processes. 8, 5, 550.

    Research output: Contribution to journalDebate/Note/Editorial

  18. Breakup dynamics of gas-liquid interface during Taylor bubble formation in a microchannel flow-focusing device

    Xingchen Li, Yiyong Huang, Xiaoqian Chen, Bengt Sunden & Zan Wu, 2020 May 1, In: Experimental Thermal and Fluid Science. 113, 110043.

    Research output: Contribution to journalArticle

  19. Numerical study of heat transfer in gravity-driven dense particle flow around a hexagonal tube

    Xing Tian, Jian Yang, Zhigang Guo, Qiuwang Wang & Bengt Sunden, 2020 May, In: Powder Technology. 367, p. 285-295 11 p.

    Research output: Contribution to journalArticle

  20. Effect of various surfactants on stability and thermophysical properties of nanofluids

    Jin Wang, Guolong Li, Tan Li, Min Zeng & Bengt Sundén, 2020 Feb 12, In: Journal of Thermal Analysis and Calorimetry.

    Research output: Contribution to journalArticle

  21. Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC

    Fereshteh Salimi Nanadegani, Ebrahim Nemati Lay & Bengt Sunden, 2020 Feb 10, In: Electrochimica Acta. 333, 135552.

    Research output: Contribution to journalArticle

  22. Investigation of gas–liquid dispersion and mass transfer performance of wide-viscosity-range impellers in water solutions of xanthan gum

    Baoqing Liu, Qing Xiao, Pengfei Gao, Bengt Sunden & Fangyi Fan, 2020 Feb, In: Chemical Engineering Research and Design. 154, p. 60-69 10 p.

    Research output: Contribution to journalArticle

  23. A network model and numerical simulations of flow distributions in packed bed reactors with different packing structures

    Jingyu Wang, Jian Yang, Bengt Sundén & Qiuwang Wang, 2020, In: Applied Thermal Engineering. 172, 115141.

    Research output: Contribution to journalArticle

  24. An improved method to visualize two regions of interest synchronously in microfluidics

    Jingzhi Zhang, Li Lei, Fushun Liang, Huiling Li, Bengt Sundén & Zan Wu, 2020, In: Flow Measurement and Instrumentation. 72, 101715.

    Research output: Contribution to journalArticle

  25. A numerical study of heat transfer effects and aerodynamic noise reduction in superheated steam flow passing a temperature and pressure regulation valve

    Jin yuan Qian, Min rui Chen, Zhi jiang Jin, Li long Chen & Bengt Sundén, 2020, In: Numerical Heat Transfer; Part A: Applications. 77, 10, p. 873-889 17 p.

    Research output: Contribution to journalArticle

  26. Application of ultrasound technology in the drying of food products

    Dan Huang, Kaiyang Men, Dapeng Li, Tao Wen, Zhongliang Gong, Bengt Sunden & Zan Wu, 2020, In: Ultrasonics Sonochemistry. 63, 104950.

    Research output: Contribution to journalReview article

  27. Assessment of flow pattern and temperature profiles by residence time distribution in typical structured packed beds

    Jingyu Wang, Jian Yang, Bengt Sundén & Qiuwang Wang, 2020, In: Numerical Heat Transfer; Part A: Applications. 77, 6, p. 559-578 20 p.

    Research output: Contribution to journalArticle

  28. Computational investigation of curvature effects on jet impingement heat transfer at internally cooled turbine vane leading edge regions

    Lei Luo, Yifeng Zhang, Bengt Sundén, Dandan Qiu, Songtao Wang & Xinghong Zhang, 2020, In: Heat Transfer Research. 51, 4, p. 333-357 25 p.

    Research output: Contribution to journalArticle

  29. Design of Full-Scale Endwall Film Cooling of a Turbine Vane

    Jian Liu, Wei Du, Guohua Zhang, Safeer Hussain, Lei Wang, Gongnan Xie & Bengt Sundén, 2020, In: Journal of Heat Transfer. 142, 2, 022201.

    Research output: Contribution to journalArticle

  30. Development of new finned tube heat exchanger: Innovative tube-bank design and thermohydraulic performance

    Babak Lotfi & Bengt Sundén, 2020, In: Heat Transfer Engineering. 41, 14, p. 1209-1231 23 p.

    Research output: Contribution to journalArticle

  31. Effect and optimization of backward hole parameters on film cooling performance by Taguchi method

    Jin Wang, Chao Liu, Zhanming Zhao, Jakov Baleta & Bengt Sundén, 2020, In: Energy Conversion and Management. 214, 112809.

    Research output: Contribution to journalArticle

  32. Enhanced heat transfer in a labyrinth channels with ribs of different shape

    Wei Du, Lei Luo, Songtao Wang, Jian Liu & Bengt Ake Sunden, 2020, In: International Journal of Numerical Methods for Heat and Fluid Flow. 30, 2, p. 724-741 18 p.

    Research output: Contribution to journalArticle

  33. Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites

    Jin Wang, Yanxin Li, Yao Wang, Li Yang, Xiangfei Kong & Bengt Sundén, 2020, In: Solar Energy. 211, p. 928-937 10 p.

    Research output: Contribution to journalArticle

  34. Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater

    Zhanxiu Chen, Dan Zheng, Jin Wang, Lei Chen & Bengt Sundén, 2020, In: Renewable Energy. 147, p. 1011-1018 8 p.

    Research output: Contribution to journalArticle

  35. Heat-dissipation performance of nanocomposite phase-change materials in a twin-heat-source system

    Yanxin Li, Jin Wang, Li Yang & Bengt Sundén, 2020, In: Fluids. 5, 4, A7.

    Research output: Contribution to journalArticle

  36. Heat transfer performance and friction factor of various nanofluids in a double-tube counter flow heat exchanger

    Dan ZHEN, Jin WANG, Yu PANG, Zhanxiu CHEN & Bengt SUNDEN, 2020, In: Thermal Science. 24, 6 PART A, p. 3601-3612 12 p.

    Research output: Contribution to journalArticle

  37. Improved modeling of heat transfer in dropwise condensation

    Jinshi Wang, Ziqiang Ma, Gen Li, Bengt Sundén & Junjie Yan, 2020, In: International Journal of Heat and Mass Transfer. 155, 119719.

    Research output: Contribution to journalArticle

  38. Influence of alternating V-rows tube layout on thermal-hydraulic characteristics of twisted elliptical tube heat exchangers

    Huaduo Gu, Yaping Chen, Bengt Sundén, Jiafeng Wu, Ning Song & Jindong Su, 2020, In: International Journal of Heat and Mass Transfer. 159, 120070.

    Research output: Contribution to journalArticle

  39. LBM modeling and analysis on microchannel slip flow and heat transfer under different heating conditions

    Yingchun Zhang, Gongnan Xie, Arash Karimipour & Bengt Sundén, 2020, In: Numerical Heat Transfer; Part A: Applications. 78, 5, p. 159-179 21 p.

    Research output: Contribution to journalArticle

  40. Numerical investigation of flow field and heat transfer characteristics in a latticework duct with jet cooling structures

    Wei Du, Lei Luo, Songtao Wang, Jian Liu & Bengt Sunden, 2020, In: International Journal of Thermal Sciences. 158, 106553.

    Research output: Contribution to journalArticle

  41. Numerical investigation of particle deposition in film-cooled blade leading edge

    Jin Wang, Ke Tian, Hengxuan Zhu, Min Zeng & Bengt Sundén, 2020, In: Numerical Heat Transfer; Part A: Applications. 77, 6, p. 579-598 20 p.

    Research output: Contribution to journalArticle

  42. Numerical studies of gas-liquid Taylor flows in vertical capillaries using CuO/water nanofluids

    Jingzhi Zhang, Shizhen Li, Xinyu Wang, Bengt Sundén & Zan Wu, 2020, In: International Communications in Heat and Mass Transfer. 116, 104665.

    Research output: Contribution to journalArticle

  43. Numerical study of flow inhomogeneity and heat transfer enhancement in structured packed beds

    Jingyu WANG, Jian YANG, Bengt SUNDEN & Qiuwang WANG, 2020, In: Thermal Science. 24, 6 PART A, p. 3533-3542 10 p.

    Research output: Contribution to journalArticle

  44. Numerical study of heat transfer in gravity-driven particle flow around tubes with different shapes

    Xing Tian, Jian Yang, Zhigang Guo, Qiuwang Wang & Bengt Sunden, 2020, In: Energies. 13, 8, 1961.

    Research output: Contribution to journalArticle

  45. On neural network modeling to maximize the power output of PEMFCs

    Fereshteh Salimi Nanadegani, Ebrahim Nemati Lay, Alfredo Iranzo, J. Antonio Salva & Bengt Sunden, 2020, In: Electrochimica Acta. 348, 136345.

    Research output: Contribution to journalArticle

  46. On the heat transfer characteristics of a Lamilloy cooling structure with curvatures with different pin fins configurations

    Lei Luo, Yifeng Zhang, Chenglong Wang, Songtao Wang & Bengt Ake Sunden, 2020, (Accepted/In press) In: International Journal of Numerical Methods for Heat and Fluid Flow.

    Research output: Contribution to journalArticle

  47. Performance analysis of a plate heat exchanger using various nanofluids

    Dan Zheng, Jin Wang, Zhanxiu Chen, Jakov Baleta & Bengt Sundén, 2020, In: International Journal of Heat and Mass Transfer. 158, 119993.

    Research output: Contribution to journalArticle

  48. Performance investigation on twisted elliptical tube heat exchangers with coupling-vortex square tube layout

    Huaduo Gu, Yaping Chen, Jiafeng Wu & Bengt Sunden, 2020, In: International Journal of Heat and Mass Transfer. 151, 119473.

    Research output: Contribution to journalArticle

  49. Preface: Supercritical carbon dioxide in thermal and energy sciences

    Bengt Sunden, Gongnan Xie & Yonghui Xie, 2020, In: Heat Transfer Research. 51, 2, p. V

    Research output: Contribution to journalDebate/Note/Editorial

  50. Thermodynamic and exergoeconomic analysis of a novel CO2 based combined cooling, heating and power system

    Feng Zhang, Gaoliang Liao, Jiaqiang E, Jingwei Chen, Erwei Leng & Bengt Sundén, 2020, In: Energy Conversion and Management. 222, 113251.

    Research output: Contribution to journalArticle

  51. Transport dynamics of droplet impact on the wedge-patterned biphilic surface

    Yanjie Yang, Zan Wu, Xiaoqian Chen, Yiyong Huang, Binrui Wu, Peter Falkman & Bengt Sundén, 2020, In: Experimental Thermal and Fluid Science. 113, 110020.

    Research output: Contribution to journalArticle

  52. Unified formula for the field synergy principle

    Yalin Cui, Yaning Zhang, Wei Wang, Bingxi Li & Bengt Sundén, 2020, In: Numerical Heat Transfer, Part B: Fundamentals. 77, 4, p. 287-298 12 p.

    Research output: Contribution to journalArticle

  53. 2019
  54. Analysis of laminar flow and heat transfer in an interrupted microchannel heat sink with different shaped ribs

    Wei Wang, Yongji Li, Yaning Zhang, Bingxi Li & Bengt Sundén, 2019 Dec 18, In: Journal of Thermal Analysis and Calorimetry.

    Research output: Contribution to journalArticle

  55. Numerical Investigation and Estimating Correlation of Micromixing Performance of Coaxial Mixers

    Baoqing Liu, Ning Sun, Zhijiang Jin, Yikun Zhang & Bengt Sunden, 2019 Dec 11, In: Industrial and Engineering Chemistry Research. 58, 49, p. 22376-22388 13 p.

    Research output: Contribution to journalArticle

  56. Effects of a dynamic injection flow rate on slug generation in a cross-junction square microchannel

    Jin Yuan Qian, Min-rui Chen, Zan Wu, Zhi-jiang Jin & Bengt Sunden, 2019 Oct 18, In: Processes. 7, 10, 765.

    Research output: Contribution to journalArticle

  57. Design guidelines for fluid-elastic instability of tube bundles subjected to two-phase cross flow

    Ning Sun, Rui jia Cheng, Ya nan Zhang, Bao qing Liu & Bengt Sunden, 2019 Aug 1, In: Journal of Zhejiang University: Science A. 20, 8, p. 577-589 13 p.

    Research output: Contribution to journalArticle

  58. Hydrogen, Batteries and Fuel Cells

    Bengt Sundén, 2019 Jul 9, 1 ed. Elsevier.

    Research output: Book/ReportBook

  59. On the nanoparticles effect on the nucleate boiling on a micro-pin-fin surface

    Bengt Sundén, Zhen Cao, Zan Wu, Bin Liu, Yonghai Zhang & Jinjia Wei, 2019 Jul 1, On the nanoparticles effect on the nucleate boiling on a micro-pin-fin surface. American Society Of Mechanical Engineers (ASME), ASME ICNMM2019-4275

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  60. Correlations for prediction of the bubble departure radius on smooth flat surface during nucleate pool boiling

    Xueli Wang, Zan Wu, Jinjia Wei & Bengt Sundén, 2019 Apr 1, In: International Journal of Heat and Mass Transfer. 132, p. 699-714 16 p.

    Research output: Contribution to journalArticle

  61. Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct

    Lei Luo, Han Yan, Shaoyun Yang, Wei Du, Songtao Wang, Bengt Sunden & Xinghong Zhang, 2019 Feb 4, In: Numerical Heat Transfer; Part A: Applications. 74, 10, p. 1611-1635 25 p.

    Research output: Contribution to journalArticle

  62. Effect of A-/B-site doping on oxygen non-stoichiometry, structure characteristics, and O2 releasing behavior of La1−xCaxCo1−yFeyO3−δ perovskites

    Qiuwan Shen, Shian Li, Guogang Yang, Bengt Sunden & Jinliang Yuan, 2019 Jan 28, In: Energies. 12, 3, 410.

    Research output: Contribution to journalArticle

  63. Effects of an MPL on water and thermal management in a PEMFC

    Fereshteh Salimi Nanadegani, Ebrahim Nemati Lay & Bengt Sunden, 2019 Jan, In: International Journal of Energy Research. 43, 1, p. 274-296

    Research output: Contribution to journalArticle

  64. Analysis of a hybrid control scheme in the district heating system with distributed variable speed pumps

    Jihao Gu, Jin Wang, Chengying Qi, Xiaojuan Yu & Bengt Sundén, 2019, In: Sustainable Cities and Society. 48, 101591.

    Research output: Contribution to journalArticle

  65. Analysis of heat and mass transport characteristics in anode-supported solid oxide fuel cells at various operating conditions

    Qiuwan Shen, Shian Li, Guogang Yang, Naibao Huang, Jinliang Yuan & Bengt Sundén, 2019, In: Numerical Heat Transfer; Part A: Applications. 75, 8, p. 509-522 14 p.

    Research output: Contribution to journalArticle

  66. An analysis of pool boiling heat transfer on nanoparticle-coated surfaces

    Zhen Cao, Zan Wu, Sahar Abdul Fattah Abood & Bengt Sundén, 2019, In: Energy Procedia. 159, p. 5880-5887 7 p.

    Research output: Contribution to journalArticle

  67. A numerical framework for heat transfer and pressure loss estimation of matrix cooling geometry in stationary and rotational states

    S. Mostafa Hosseinalipour, Parisa Afkari, Hamidreza Shahbazian & Bengt Sundén, 2019, In: Numerical Heat Transfer; Part A: Applications. 76, 5, p. 348-368

    Research output: Contribution to journalArticle

  68. A numerical prediction on heat transfer characteristics from a circular tube in supercritical fluid crossflow

    Jingzhe Xie, Hongbin Yan, Bengt Sundén & Gongnan Xie, 2019, In: Applied Thermal Engineering. 153, p. 692-703 12 p.

    Research output: Contribution to journalArticle

  69. A parametric study on cavitation flow through steam trap valves under high pressure difference

    C. Qiu, Z.X. Gao, Z.J. Jin, Jin-Yuan Qian & Bengt Sundén, 2019.

    Research output: Contribution to conferenceAbstract

  70. A review on molten-salt-based and ionic-liquid-based nanofluids for medium-to-high temperature heat transfer

    Wei Wang, Zan Wu, Bingxi Li & Bengt Sundén, 2019, In: Journal of Thermal Analysis and Calorimetry. 136, 3, p. 1037-1051 15 p.

    Research output: Contribution to journalArticle

  71. Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel

    Lv Ye, Xing Yang, Bengt Sunden & Zhenping Feng, 2019, In: Numerical Heat Transfer; Part A: Applications. 75, 5, p. 291-308 18 p.

    Research output: Contribution to journalArticle

  72. Effect of droplet superficial velocity on mixing efficiency in liquid-liquid droplet flow

    X.J. Li, C. Qiu, Zan Wu, Jin-Yuan Qian & Bengt Sundén, 2019.

    Research output: Contribution to conferenceAbstract

  73. Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

    Baoqing Liu, Qing Xiao, Ning Sun, Pengfei Gao, Fangyi Fan & Bengt Sunden, 2019, In: Chemical Engineering Research and Design. 145, p. 314-322 9 p.

    Research output: Contribution to journalArticle

  74. Effect of hole configurations on film cooling performance

    Jin Wang, Ke Tian, Jing Luo & Bengt Sundén, 2019, In: Numerical Heat Transfer; Part A: Applications. 75, 11, p. 725-738 14 p.

    Research output: Contribution to journalArticle

  75. Effect of operational parameters on combustion and emissions in an industrial gas turbine combustor

    Mohsen D. Emami, Hamidreza Shahbazian & Bengt Sunden, 2019, In: Journal of Energy Resources Technology, Transactions of the ASME. 141, 1, 012202.

    Research output: Contribution to journalArticle

  76. Effect of phase change materials on heat dissipation of a multiple heat source system

    Kai Yu, Yao Wang, Yanxin Li, Jakov Baleta, Jin Wang & Bengt Sundén, 2019, In: Open Physics. 17, 1, p. 797-807 11 p.

    Research output: Contribution to journalArticle

  77. Energy saving in thermal energy systems using dimpled surface technology – A review on mechanisms and applications

    Saman Rashidi, Faramarz Hormozi, Bengt Sundén & Omid Mahian, 2019, In: Applied Energy. 250, p. 1491-1547 57 p.

    Research output: Contribution to journalReview article