Carin Andersson

Adjunct Professor
More filtering options
  1. 2020
  2. Analysis of manufacturing costs for powder metallurgy (pm) gear manufacturing processes: a case study of a helical drive gear

    Babak Kianian & Carin Andersson, 2020 Nov 3, EcoDesign and Sustainability I : Products, Services, and Business Models. Springer, p. 471-487 17 p. (Sustainable Production, Life Cycle Engineering and Management).

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  3. 2019
  4. Comparing Life Cycle Costing and Performance Part Costing in Assessing Acquisition and Operational Cost of New Manufacturing Technologies

    Babak Kianian, Martin Kurdve & Carin Andersson, 2019 May 4, 26th CIRP Conference on Life Cycle Engineering (LCE). Vol. 80. p. 428-433 5 p. (Procedia CIRP).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  5. 2018
  6. Analysis of manufacturing costs for conventional gear manufacturing processes: a case study of a spur engine gear

    Babak Kianian & Carin Andersson, 2018 Sep 1, International Gear Conference 2018. Chartridge Books Oxford, Vol. 1. p. 393-402 10 p.

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  7. Towards guidelines for selection of production performance indicators to measure sustainability performance

    Babak Kianian, Carin Andersson & Elaine Daly, 2018 Jul 25, In: Procedia Manufacturing. 25, p. 570-577 6 p.

    Research output: Contribution to journalArticle

  8. A life cycle approach to business performance measurement systems

    Anna Landström, Peter Almström, Mats Winroth, Carin Andersson, Anna Ericson Öberg, Kurdve Martin, Sasha Shahbazi, Magnus Wiktorsson, Christina Windmark & Mats Zackrisson, 2018, In: Procedia Manufacturing. p. 126-133 8 p.

    Research output: Contribution to journalArticle

  9. Leading towards high-performance manufacturing - Enabling indicators in early R&D phases ensuring future KPI outcome

    Magnus Wiktorsson, Carin Andersson & Veikko Turunen, 2018, In: Procedia Manufacturing. 25, p. 223-230 8 p.

    Research output: Contribution to journalArticle

  10. Prediction of the cutting forces in gear hobbing and the wear behaviour of the individual hob cutting teeth

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2018, In: International Journal of Manufacturing Research. 13, 4, p. 342-358 17 p.

    Research output: Contribution to journalArticle

  11. 2017
  12. Sustainability-Conscious Powder Metallurgy Gear Manufacturing: an analysis of current manufacturing challenges

    Babak Kianian & Carin Andersson, 2017 Sep, VDI-Verlag GmbH. Dusseldorf: VDI Verlag GMBH, p. 1251-1264 13 p. (VDI-Berichte 2294.2).

    Research output: Chapter in Book/Report/Conference proceedingBook chapter

  13. Grinding or shaving?-performance based economic decision support in the manufacturing of gears

    Carin Andersson, 2017, VDI Berichte: International Conference on Gear Production, 2017 and International Conference on High Performance Plastic Gears, 2017. 2294 ed. Vol. 2017. p. 328-338 11 p. (VDI Berichte).

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  14. Sustainability Performance Indicators at Shop Floor Level in Large Manufacturing Companies

    Mats Zackrisson, Martin Kurdve, Sasha Shahbazi, Magnus Wiktorsson, Mats Winroth, Anna Landström, Peter Almström, Carin Andersson, Christina Windmark, Anna Ericson Öberg & Andreas Myrelid, 2017, In: Procedia CIRP. 61, p. 457-462 6 p.

    Research output: Contribution to journalArticle

  15. 2016
  16. Analysis of the potential of assessing sustainable production with a cost model

    Christina Windmark & Carin Andersson, 2016 Oct 25. 9 p.

    Research output: Contribution to conferencePaper, not in proceeding

  17. Sustainable production indicators at factory level

    Mats Winroth, Peter Almström & Carin Andersson, 2016 Jul 4, In: Journal of Manufacturing Technology Management. 27, 6, p. 842-873 32 p.

    Research output: Contribution to journalReview article

  18. Present state analysis of business performance measurement systems in large manufacturing companies

    Anna Landström, Peter Almström, Mats Winroth, Carin Andersson, Christina Windmark, Sasha Shabazi, Magnus Wiktorsson, Kurdve Martin, Mats Zackrisson, Anna Ericson Öberg & Andreas Myrelid, 2016 Jun, Proceedings of the 10th Conference of the Performance Measurement Association (PMA), Edinburgh, UK, June. p. 26-29 4 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  19. Prediction and experimental verification of the cutting forces in gear form milling

    Mattias Svahn, Carin Andersson & Lars Vedmar, 2016, In: International Journal of Advanced Manufacturing Technology. 82, 1-4, p. 111-121

    Research output: Contribution to journalArticle

  20. 2015
  21. Gear Tooth Surface Roughness of Helical Gears Manufactured by a Form Milling Cutter

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2015, GEAR TECHNOLOGY, The Journal of Gear Manufacturing.

    Research output: Other contributionMiscellaneous

  22. Minimizing refining steps for gears

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2015, Alicona Focus Variation Magazine.

    Research output: Other contributionMiscellaneous

  23. 2014
  24. A Business Case Tool as Decision Support in Early Production Location Project Stages

    Christina Windmark & Carin Andersson, 2014, Proceedings of the 6th Swedish Production Symposium. Stahre, J., Johansson, B. & Björkman, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  25. Dry or Wet Gear Hobbing a Case Study

    Kathrine Spang & Carin Andersson, 2014.

    Research output: Contribution to conferencePaper, not in proceeding

  26. Gear Tooth Surface Roughness of Helical Gears Manufactured by a Form Milling Cutter

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2014, [Host publication title missing]. Velex, P. (ed.). Woodhead Publishing Limited, Vol. 1. p. 96-106 11 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  27. Grinding or shaving - economic decision support in the production of gears

    Carin Andersson & Jan-Eric Ståhl, 2014, p. 1-8. 8 p.

    Research output: Contribution to conferencePaper, not in proceeding

  28. The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2014, GEAR TECHNOLOGY, The Journal of Gear Manufacturing.

    Research output: Other contributionMiscellaneous

  29. 2013
  30. Costs of inbound logistics – Towards a decision support model for production system design

    Christina Windmark & Carin Andersson, 2013, Advances in Sustainable and Competitive Manufacturing Systems.. Azevedo, A. (ed.). Springer, p. 1049-1061 8 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  31. The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2013, VDI-Berichte 2199.1-2. Höhn, B-R. (ed.). VDI Verlag GMBH, p. 353-365 12 p.

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  32. 2012
  33. A production performance analysis regarding downtime and downtime pattern

    Christina Windmark, Jan-Eric Ståhl, Per Gabrielson & Carin Andersson, 2012.

    Research output: Contribution to conferencePaper, not in proceeding

  34. Business case as a decision support when relocating manufacturing

    Christina Windmark & Carin Andersson, 2012.

    Research output: Contribution to conferencePaper, not in proceeding

  35. Tooth Deviations of an Involute Helical Gear Manufactured in a Simulated Hobbing Process with Introduced Errors

    Mattias Svahn, Lars Vedmar & Carin Andersson, 2012.

    Research output: Contribution to conferencePaper, not in proceeding

  36. 2011
  37. Achieving sustainable production through increased utilization of production resources

    Peter Almström, Carin Andersson, Abid Mohammed & Mats Winroth, 2011, p. 398-406.

    Research output: Contribution to conferencePaper, not in proceeding

  38. Combining Overall equipment Efficiency (OEE) and productivity measures as drivers for production improvements

    Carin Andersson & Monica Bellgran, 2011, p. 20-29.

    Research output: Contribution to conferencePaper, not in proceeding

  39. Dynamic Manufacturing Costs - Describing the Dynamic Behavior of Downtimes from a Cost Perspective

    Mathias Jönsson, Per Gabrielson, Carin Andersson & Jan-Eric Ståhl, 2011. 6 p.

    Research output: Contribution to conferencePaper, not in proceeding

  40. Managing production performance with Overall equipment Efficiency (OEE) - implementation issues and common pitfalls

    Carin Andersson & Monica Bellgran, 2011, 44th CIRP Conference on Manufacturing Systems. Duffy, N. (ed.). CIRP

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  41. Modeling of maintenance costs

    Carin Andersson, Mathias Jönsson & Jan-Eric Ståhl, 2011.

    Research output: Contribution to conferencePaper, not in proceeding

  42. Relations between Volume Flexibility and Part Cost in Assembly Lines

    Mathias Jönsson, Carin Andersson & Jan-Eric Ståhl, 2011, Robotics and Computer-Integrated Manufacturing. Elsevier, Vol. 27. p. 669-673

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  43. 2009
  44. A parametric Analysis of the Undeformed Chip Geometry in Gear Hobbing

    Lars Vedmar, Carin Andersson & Jan-Eric Ståhl, 2009, In: Journal of Manufacturing Science and Engineering. 131, December 2009, p. (061003) 1-8

    Research output: Contribution to journalReview article

  45. 2008
  46. A general economic model for manufacturing cost simulation

    Mathias Jönsson, Carin Andersson & Jan-Eric Ståhl, 2008, Manufacturing Systems and Technologies for the New Frontier. Springer, p. 33-38

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

  47. An analythical geometry study of gear hobbing

    Lars Vedmar, Carin Andersson & Jan-Eric Ståhl, 2008, (Unpublished).

    Research output: Contribution to conferencePaper, not in proceeding

  48. Experimental studies of cutting force variation in face milling

    Carin Andersson, Mats Andersson & Jan-Eric Ståhl, 2008, (Unpublished).

    Research output: Contribution to conferencePaper, not in proceeding

  49. Gjutuppgiften – Erfarenheter av problembaserat lärande i en tillämpad teknikkurs för ett stort elevantal

    Mats Andersson & Carin Andersson, 2008, [Host publication title missing]. Lunds Tekniska Högskola

    Research output: Chapter in Book/Report/Conference proceedingPaper in conference proceeding

Previous 1 2 Next