Hybrid control of homogeneous charge compression ignition (HCCI) engine dynamics
Research output: Contribution to journal › Article
The homogeneous charge compression ignition ( HCCI) combustion engine principle lacks direct ignition timing control, instead the auto-ignition depends on the operating condition. Since auto-ignition of a homogeneous mixture is very sensitive to operating conditions, fast combustion phasing control is necessary for reliable operation. For this paper, a six-cylinder heavy-duty HCCI engine was controlled on a cycle-to-cycle basis in real time. Sensors, actuators and control structures for control of the HCCI combustion were compared. Among several actuators for HCCI engine control suggested, two actuators were compared-i.e., dual-fuel actuation and variable valve actuation (VVA). As for control principles, model predictive control (MPC) has several desirable features and today MPC can be applied to relatively fast systems, such as VVA and dual-fuel actuation. For sensor feedback control of the HCCI engine, cylinder pressure and ion current - i.e., the electronic conductive properties in the reaction zone - were compared. Combustion phasing control based on ion current was compared to control based on cylinder pressure. For the purpose of control synthesis requiring dynamic models, system identification provided models of the HCCI combustion, the models being validated by stochastic model validation. With such models providing a basis for model-based control, MPC control results were compared to PID and LQG control results. While satisfying the constraints on cylinder pressure, both control of the combustion phasing and control of load torque was achieved with simultaneous minimization of the fuel consumption and emissions.
|Research areas and keywords||
Subject classification (UKÄ) – MANDATORY
|Journal||International Journal of Control|
|Publication status||Published - 2006|