Heat Recovery Systems and CHP, 1359-4311

Tidskrift

Fler filtreringsmöjligheter
  1. 2003
  2. Optimal design of plate heat exchangers with and without pressure drop specifications

    Wang, L. & Bengt Sundén, 2003, I : Applied Thermal Engineering. 23, 3, s. 295-311

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  3. 2004
  4. Chemiluminescence sensor for local equivalence ratio of reacting mixtures of fuel and air (FLAMESEEK)

    Hardalupas, Y., Orain, M., Panoutsos, CS., Taylor, AMKP., Olofsson, J., Seyfried, H., Mattias Richter, Hult, J., Marcus Aldén, Hermann, F. & Jens Klingmann, 2004, I : Applied Thermal Engineering. 24, 11-12, s. 1619-1632

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  5. 2006
  6. An experimental investigation of the port flow maldistribution in small and large plate package heat exchangers

    Bobbili, P. R., Bengt Sundén & Das, S. K., 2006, I : Applied Thermal Engineering. 26, 16, s. 1919-1926

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  7. 2008
  8. Optimization of Compact Heat Exchangers by a Genetic Algorithm

    Xie, G., Bengt Sundén & Wang, Q., 2008, I : Applied Thermal Engineering. 28, 8-9, s. 895-906

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  9. 2009
  10. 2010
  11. CFD-modelling of natural convection in a groundwater-filled borehole heat exchanger

    Gustafsson, A. -M., Westerlund, L. & Hellström, G., 2010, I : Applied Thermal Engineering. 30, 6-7, s. 683-691

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  12. 2013
  13. A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs

    Xie, G., Zheng, S., Zhang, W. & Bengt Sundén, 2013, I : Applied Thermal Engineering. 61, 2, s. 289-300

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  14. A performance analysis of porous graphite foam heat exchangers in vehicles

    Lin, W., Bengt Sundén & Yuan, J., 2013, I : Applied Thermal Engineering. 50, 1, s. 1201-1210

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  15. Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger

    Zeng, M., Ma, T., Bengt Sundén, Trabia, M. B. & Wang, Q., 2013, I : Applied Thermal Engineering. 50, 1, s. 886-895

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  16. Pressure drop and convective heat transfer of water and nanofluids in a double-pipe helical heat exchanger

    Zan Wu, Lei Wang & Bengt Sundén, 2013, I : Applied Thermal Engineering. 60, 1-2, s. 266-274

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  17. Thermomechanical optimization of lightweight thermal protection system under aerodynamic heating

    Xie, G., Wang, Q., Bengt Sundén & Zhang, W., 2013, I : Applied Thermal Engineering. 59, 1-2, s. 425-434

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  18. 2014
  19. Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

    Xie, G., Zhang, F., Bengt Sundén & Zhang, W., 2014, I : Applied Thermal Engineering. 62, 2, s. 791-802

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  20. Economic optimization design of shell-and-tube heat exchangers by a cuckoo-search-algorithm

    Asadi, M., Song, Y., Bengt Sundén & Xie, G., 2014, I : Applied Thermal Engineering. 73, 1, s. 1032-1040

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  21. Influence of wall ribs on the thermal stratification and self-pressurization in a cryogenic liquid tank

    Fu, J., Bengt Sundén & Chen, X., 2014, I : Applied Thermal Engineering. 73, 2, s. 1421-1431

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  22. Investigation on thermal performance of high temperature multilayer insulations for hypersonic vehicles under aerodynamic heating condition

    Ji, T., Zhang, R., Bengt Sundén & Xie, G., 2014, I : Applied Thermal Engineering. 70, 1, s. 957-965

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  23. Laminar thermal performance of microchannel heat sinks with constructal vertical Y-shaped bifurcation plates

    Li, Y., Zhang, F., Bengt Sundén & Xie, G., 2014, I : Applied Thermal Engineering. 73, 1, s. 185-195

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  24. Preface: Special Issue for the 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control (IWHT2013)

    Wang, Q-W., Bengt Sundén, Chen, Y., Guo, Z. & Stehlik, P., 2014, I : Applied Thermal Engineering. 73, 2, s. 1401-1401

    Forskningsoutput: TidskriftsbidragDebate/Note/Editorial

  25. 2015
  26. Heat transfer and pressure drop in a smooth and ribbed turn region of a two-pass channel

    Wang, C., Lei Wang & Bengt Sundén, 2015, I : Applied Thermal Engineering. 85, s. 225-233

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  27. Influence of phase change on self-pressurization in cryogenic tanks under microgravity

    Fu, J., Bengt Sundén, Chen, X. & Huang, Y., 2015, I : Applied Thermal Engineering. 87, s. 225-233

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  28. A comparative study of different burning time models for the combustion of aluminum dust particles

    Bidabadi, M., Poorfar, A. K., Wang, S. & Bengt Sundén, 2015 maj 25, I : Applied Thermal Engineering. 105, s. 474–482

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  29. 2016
  30. Investigation on thermal and thermomechanical performances of actively cooled corrugated sandwich structures

    Xie, G., Wang, C., Ji, T. & Bengt Sunden, 2016 jun 25, I : Applied Thermal Engineering. 103, s. 660-669 10 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  31. 2017
  32. On the solar receiver thermal enhancement by using the dimple combined with delta winglet vortex generator

    Lei, L., Wen, F., Lei Wang, Bengt Sundén & Wang, S., 2017 jan 25, I : Applied Thermal Engineering. 111, s. 586-598 13 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  33. A novel optimization framework for designing multi-stream compact heat exchangers and associated network

    Wang, Z., Bengt Sundén & Li, Y., 2017 apr 1, I : Applied Thermal Engineering. 116, s. 110-125 16 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  34. Flow pattern and heat transfer past two tandem arranged cylinders with oscillating inlet velocity

    Jian Liu, Xie, G. & Bengt Sundén, 2017 jun 25, I : Applied Thermal Engineering. 120, s. 614-625 12 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  35. Computational optimization of counter-flow double-layered microchannel heat sinks subjected to thermal resistance and pumping power

    Shen, H-M., Jin, X., Zhang, F., Xie, G., Bengt Sunden & Yan, H., 2017 jul 5, I : Applied Thermal Engineering. 121, s. 180-189 10 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  36. Influence of the upstream slot geometry on the endwall cooling and phantom cooling of vane suction side surface

    Du, K., Li, Z., Li, J. & Bengt Sunden, 2017 jul 5, I : Applied Thermal Engineering. 121, s. 688-700 13 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  37. Heat transfer and turbulent flow characteristics over pocket cavity in the junction part of an outlet guide vane in a gas turbine

    Jian Liu, Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2017 sep 1, I : Applied Thermal Engineering. 124, s. 831-843 13 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  38. 2018
  39. Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs

    Wang, J., Jian Liu, Lei Wang, Bengt Sundén & Wang, S., 2018 jan, I : Applied Thermal Engineering. 129, s. 1369-1381

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  40. Parametric analysis on throttling components of multi-stage high pressure reducing valve

    Hou, C. W., Qian, J. Y., Chen, F. Q., Jiang, W. K. & Jin, Z., 2018 jan 5, I : Applied Thermal Engineering. 128, s. 1238-1248 11 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  41. Influence of spatial and temporal distribution of Turbulent Kinetic Energy on heat transfer coefficient in a light duty CI engine operating with Partially Premixed Combustion

    Tanov, S., Pachano, L., Öivind Andersson, Wang, Z., Mattias Richter, Pastor, J. V., García-Oliver, J. M. & García, A., 2018 jan 25, I : Applied Thermal Engineering. 129, s. 31-40 10 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  42. The feasibility of mode control in rotating detonation engine

    Deng, Y-L., Ma, H., Xu, C., Liu, X. & Zhou, C., 2018 jan 25, I : Applied Thermal Engineering. 129, s. 1538-1550 13 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  43. Effects of the position of a bluff-body on the diffusion flames: A combined experimental and numerical study

    Tong, Y., Liu, X., Chen, S., Zhongshan Li & Jens Klingmann, 2018 feb 25, I : Applied Thermal Engineering. 131, s. 507-521 15 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  44. Application of fractal theory in the arrangement of truncated ribs in a rectangular cooling channel (4: 1) of a turbine blade

    Jian Liu, Wang, J., Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2018 jul 5, I : Applied Thermal Engineering. 139, s. 488-505 18 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  45. Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel

    Luo, L., Chen, Q., Du, W., Wang, S., Bengt Sundén & Zhang, X., 2018 jul 25, I : Applied Thermal Engineering. 140, s. 166-179 14 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  46. Start of low temperature reactions detection based on motoring pressure prediction for partially premixed combustion

    Cheng Fang, Ouyang, M., Yin, L., Per Tunestal, Yang, F. & Yang, X., 2018 aug 1, I : Applied Thermal Engineering. 141, s. 1101-1109 9 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  47. Thermophysical properties and convection heat transfer behavior of ionic liquid [C4mim][NTf2] at medium temperature in helically corrugated tubes

    Wang, W., Zan Wu, Zhang, Y., Li, B. & Bengt Sundén, 2018 sep 1, I : Applied Thermal Engineering. 142, s. 457-465 9 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  48. Effects of a pocket cavity on heat transfer and flow characteristics of the endwall with a bluff body in a gas turbine engine

    Jian Liu, Hussain, S., Lei Wang, Xie, G. & Bengt Sundén, 2018 okt 1, I : Applied Thermal Engineering. 143, s. 935-946 12 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  49. Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine

    Shamun, S., Belgiorno, G., Di Blasio, G., Beatrice, C., Martin Tunér & Per Tunestål, 2018 dec 25, I : Applied Thermal Engineering. 145, s. 444-452 9 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  50. 2019
  51. A numerical prediction on heat transfer characteristics from a circular tube in supercritical fluid crossflow

    Xie, J., Yan, H., Bengt Sundén & Xie, G., 2019, I : Applied Thermal Engineering. 153, s. 692-703 12 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  52. Development of novel ultrasonic temperature measurement technology for combustion gas as a potential indicator of combustion instability diagnostics

    Hwang, O., Lee, M. C., Wubin Weng, Zhang, Y. & Zhongshan Li, 2019, I : Applied Thermal Engineering. 159, 113905.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  53. Effect of EGR routing on efficiency and emissions of a PPC engine

    Nikolaos Dimitrakopoulos, Belgiorno, G., Martin Tunér, Per Tunestål & Di Blasio, G., 2019, I : Applied Thermal Engineering. 152, s. 742-750 9 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  54. Heat transfer and flow structure in a detached latticework duct

    Wei Du, Luo, L., Wang, S., Jian Liu & Bengt Sunden, 2019, I : Applied Thermal Engineering. 155, s. 24-39 16 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  55. Influences of a multi-cavity tip on the blade tip and the over tip casing aerothermal performance in a high pressure turbine cascade

    Du, K., Li, Z., Li, J. & Bengt Sunden, 2019, I : Applied Thermal Engineering. 147, s. 347-360 14 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  56. Investigation on a high-stratified direct injection spark ignition (DISI) engine fueled with methanol under a high compression ratio

    Li, Y., Xue Song Bai, Martin Tunér, Im, H. G. & Johansson, B., 2019, I : Applied Thermal Engineering. 148, s. 352-362 11 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  57. Study on low temperature heat release of partially premixed combustion in a heavy duty engine for real-time applications

    Cheng Fang, Per Tunestal, Yin, L., Yang, F. & Yang, X., 2019, I : Applied Thermal Engineering. 148, s. 219-228

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  58. Performance and emissions of a series hybrid vehicle powered by a gasoline partially premixed combustion engine

    García, A., Monsalve-Serrano, J., Sari, R., Nikolaos Dimitrakopoulos, Martin Tunér & Per Tunestål, 2019 mar 5, I : Applied Thermal Engineering. 150, s. 564-575 12 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  59. Investigation on bluff-body and swirl stabilized flames near lean blowoff with PIV/PLIF measurements and LES modelling

    Guo, S., Wang, J., Zhang, W., Lin, B., Wu, Y., Senbin Yu, Li, G., Hu, Z. & Huang, Z., 2019 sep, I : Applied Thermal Engineering. 160, 114021.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  60. 2020