Institutionen för maskinteknologi

Organisation: institution

Fler filtreringsmöjligheter
  1. 2019
  2. Dislocation Generation from Grain Boundaries in Nanosized Cu-beams

    Aylin Ahadi, Per Hansson & Solveig Melin, 2019 aug 5, (Accepted/In press). 2 s.

    Forskningsoutput: KonferensbidragKonferensabstract

  3. Comparing Life Cycle Costing and Performance Part Costing in Assessing Acquisition and Operational Cost of New Manufacturing Technologies

    Babak Kianian, Kurdve, M. & Carin Andersson, 2019 maj 4, 26th CIRP Conference on Life Cycle Engineering (LCE). Vol. 80. s. 428-433 5 s. (Procedia CIRP).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  4. Middle East: Iran

    Babak Kianian, 2019 mar 26, Wohlers Report 2019 : 3D Printing and Additive Manufacturing State of the Industry, Annual Worldwide Progress Repor. 24 red. FORT COLLINS, COLORADO, USA: Wohlers Associates, Inc., 369 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKapitel i rapport

  5. Scanning 3DXRD measurement of grain growth, stress, and formation of Cu6Sn5 around a tin whisker during heat treatment

    Johan Hektor, Stephen A. Hall, Henningsson, N. A., Jonas Engqvist, Matti Ristinmaa, Filip Lenrick & Wright, J. P., 2019 jan 31, I : Materials. 12, 3, 446.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  6. Assessment of cooling integration with direct cooled windings

    Avo Reinap, Gabassi, M., Mats Alakula & Mats Andersson, 2019 jan 14, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018. Institute of Electrical and Electronics Engineers Inc., 8607655

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  7. Frames of reference in multibody dynamics

    Per Lidström, 2019 jan, I : Mathematics and Mechanics of Solids. 24, 1, s. 98-151

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  8. Optimization of Electric Powertrains Based on Scalable Cost and Performance Models

    Gabriel Domingues-Olavarria, Marquez-Fernandez, F. J., Pontus Fyhr, Avo Reinap, Mats Andersson & Mats Alakula, 2019 jan, I : IEEE Transactions on Industry Applications. 55, 1, s. 751-764

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  9. Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries

    Agic, A., Eynian, M., J. E. Ståhl & Beno, T., 2019, I : International Journal on Interactive Design and Manufacturing. 13, 2, s. 557-565

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  10. Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure Measurements

    Lars Wadsö, Hort, N. & Dmytro Orlov, 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (red.). Springer International Publishing AG, s. 121-126 6 s. (Minerals, Metals and Materials Series).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  11. Effect of machining parameters on cutting force and surface integrity when high-speed turning AD 730™ with PCBN tools

    Chen, Z., Lin Peng, R., Jinming Zhou, M’Saoubi, R., Gustafsson, D. & Moverare, J., 2019, I : International Journal of Advanced Manufacturing Technology. 100, 9-12, s. 2601-2615

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  12. Experimental analysis of cutting edge effects on vibrations in end milling

    Agic, A., Eynian, M., J. E. Ståhl & Beno, T., 2019, I : CIRP Journal of Manufacturing Science and Technology. 24, s. 66-74

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  13. Fully coupled thermo-mechanical modelling of the initial phase of the Friction Stir Welding Process using Finite Element Analysis

    Aylin Ahadi & Roura Port, F., 2019, (Accepted/In press) I : Advances in Materials Science and Engineering. s. 22

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  14. Grain boundary influence on the mechanical response to tensile loading for nano-sized metallic beams modelled by MD simulations

    Aylin Ahadi, Solveig Melin & Per Hansson, 2019, (Accepted/In press) Grain boundary influence on the mechanical response to tensile loading for nano-sized metallic beams modelled by MD simulations. Proceeding to MSMF9, 6 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  15. Grain Size Effects on Tensile Behaviour of Nano-crystalline Nanoporous Gold

    Yunus Yildiz, Aylin Ahadi & KIRCA, M., 2019, (Accepted/In press).

    Forskningsoutput: KonferensbidragKonferensabstract

  16. Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons

    Ghasemi, R., Jakob Johansson, Jan-Eric Ståhl & Jarfors, A. E. W., 2019, I : Tribology International. 133, s. 182-192 11 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  17. Mechanical Properties of Boron Phosphides

    Solozhenko, V. & Volodymyr Bushlya, 2019, I : Journal of Superhard Materials. 41, 2, s. 84-89 6 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  18. Mechanical properties of tungsten irradiated with high-energy protons and spallation neutrons

    Jemila Habainy, Dai, Y., Lee, Y. & Srinivasan Iyengar, 2019, I : Journal of Nuclear Materials. 514, s. 189-195 7 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  19. On chemical and diffusional interactions between PCBN and superalloy Inconel 718: Imitational experiments

    V. Bushlya, Bjerke, A., Turkevich, V. Z., F. Lenrick, Petrusha, I. A., Cherednichenko, K. A. & J. E. Ståhl, 2019, I : Journal of the European Ceramic Society.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  20. Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning

    Johansson, D., Andrew Hrechuk, Volodymyr Bushlya, Mårtensson, M., Can, A. & Jan Eric Ståhl, 2019, I : Wear. 426-427, Part B, s. 1515-1522 8 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  21. Tool Life and Cutting Data Modelling in Metal Cutting: Testing, Modelling and Cost Performance

    Johansson, D., 2019, Department of Mechanical Engineering, Lund University. 186 s.

    Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

  22. 2018
  23. Hole-quality evaluation in drilling fiber-reinforced composites

    Andrew Hrechuk, Volodymyr Bushlya & Jan Eric Ståhl, 2018 nov 15, I : Composite Structures. 204, s. 378-387 10 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  24. Heat flux in metal cutting: Experiment, model, and comparative analysis

    V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, M'Saoubi, R. & J. E. Ståhl, 2018 nov 1, I : International Journal of Machine Tools and Manufacture. 134, s. 81-97 17 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  25. Power Losses and Heat Extraction in a Stator with Directly Air-Cooled Laminated Windings

    A. Reinap, C. Hogmark, Marquez-Fernandez, F. J., M. Alakiila & M. Andersson, 2018 okt 25, Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018. Institute of Electrical and Electronics Engineers Inc., s. 2675-2681 7 s. 8506732

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  26. Capturing nanoscale effects by peridynamics

    Aylin Ahadi & Solveig Melin, 2018 okt 3, I : Mechanics of Advanced Materials and Structures. 25, 13, s. 1115-1120

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  27. Characterisation of mechanical and thermal properties of tungsten for high power spallation target applications

    Jemila Habainy, 2018 okt 1, Lund: Department of Mechanical Engineering, Lund University. 266 s.

    Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

  28. Thermal diffusivity of tungsten irradiated with protons up to 5.8 dpa

    Jemila Habainy, Dai, Y., Lee, Y. & Srinivasan Iyengar, 2018 okt 1, I : Journal of Nuclear Materials. 509, s. 152-157 6 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  29. COATED NANOPOROUS STRUCTURES SUBJECTED TO STRESS RELIEF ANNEALING

    Yunus Yildiz, ERTURK, A. S., Aylin Ahadi & KIRCA, M., 2018 okt, Proceeding to NSCM31. Umeå: Proceeding to NSCM31, 5 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  30. FIRST PRINCIPLES CALCLATIONS OF MECHANCICAL LOAD ON OPTICAL PROPERTIES of Eu:Y2SiO5

    Amin Mirzai, Aylin Ahadi & Solveig Melin, 2018 okt, Proceeding to NSCM31. 6 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  31. All-atomic and coarse-grained molecular dynamics investigation of deformation in semi-crystalline lamellar polyethylene

    Pär Olsson, in 't Veld, P., Andreasson, E., Bergvall, E., Persson Jutemar, E., Petersson, V., Rutledge, G. & Kroon, M., 2018 sep 26, I : Polymer. 153, s. 305-316 12 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  32. Influence of Quantum Interference on the Thermoelectric Properties of Molecular Junctions

    Miao, R., Hailiang Xu, Skripnik, M., Cui, L., Wang, K., Pedersen, K. G. L., Martin Leijnse, Pauly, F., Kenneth Wärnmark, Meyhofer, E., Reddy, P. & Heiner Linke, 2018 sep 12, I : Nano Letters. 18, 9, s. 5666-5672 7 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  33. Analysis of manufacturing costs for conventional gear manufacturing processes: a case study of a spur engine gear

    Babak Kianian & Carin Andersson, 2018 sep 1, International Gear Conference 2018. Chartridge Books Oxford, Vol. 1. s. 393-402 10 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKapitel samlingsverk

  34. Cost-based pricing for learning organizations – a model presentation and demonstration

    Jan-Eric Ståhl, Christina Windmark & Babak Kianian, 2018 jul 25, I : Procedia Manufacturing. 25, s. 239-246 6 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  35. Towards energy efficient heating in industrial processes - Three steps to achieve maximized efficiency in an induction heating system

    Siesing, L., Fredrik Lundström, Kenneth Frogner, Tord Cedell & Mats Andersson, 2018 jul 25, Procedia Manufacturing. Vol. 25. s. 404-411 8 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  36. Towards guidelines for selection of production performance indicators to measure sustainability performance

    Babak Kianian, Carin Andersson & Daly, E., 2018 jul 25, I : Procedia Manufacturing. 25, s. 570-577 6 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  37. Performance-based costing as decision support for development of discrete part production: Linking performance, production costs and sustainability

    Christina Windmark, 2018 jul 20, Lund: Division of Production and Materials Engineering, Lund University,. 241 s.

    Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

  38. Ab initio investigation of monoclinic phase stability and martensitic transformation in crystalline polyethylene

    Pär Olsson, Hyldgaard, P., Schröder, E., Persson Jutemar, E., Andreasson, E. & Kroon, M., 2018 jul 10, I : Physical Review Materials. 2, 7, 13 s., 075602.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  39. Effect of mechanical load on optical properties of un-doped and Eu3+-doped Y2SiO5 at the quantum scale

    Amin Mirzai, Aylin Ahadi & Solveig Melin, 2018 jul 9.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  40. SHEAR ANISOTROPY IN Si-Cu INTERFACES ON THE ATOMIC SCALE

    Johansson, D., Per Hansson, Aylin Ahadi & Solveig Melin, 2018 jun 25, SHEAR ANISOTROPY IN Si-Cu INTERFACES ON THE ATOMIC SCALE. 13 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  41. Electric roads: Analyzing the societal cost of electrifying all Danish road transport

    Gabriel Domingues-Olavarría, Márquez-Fernández, F. J., Pontus Fyhr, Avo Reinap & Mats Alaküla, 2018 jun 7, I : World Electric Vehicle Journal. 9, 1, 9.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  42. Electromobility: Materials and Manufacturing Economics

    Pontus Fyhr, 2018 maj 10, Lund: Division of Production and Materials Engineering, Lund University,. 94 s.

    Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

  43. Assessment on abrasiveness of high chromium cast iron material on the wear performance of PCBN cutting tools in dry machining

    Chen, L., Jan Eric Stahl, Zhao, W. & Jinming Zhou, 2018 maj 1, I : Journal of Materials Processing Technology. 255, s. 110-120 11 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  44. Middle East: Iran

    Babak Kianian, 2018 apr 18, Wohlers Report 2018: 3D Printing and Additive Manufacturing State of the Industry, Annual Worldwide Progress Report. 23 red. FORT COLLINS, COLORADO, USA: Wohlers Associates, Inc.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKapitel i rapport

  45. Evidence of 3D strain gradients associated with tin whisker growth

    Johan Hektor, Marijon, J-B., Matti Ristinmaa, Stephen Hall, Håkan Hallberg, Srinivasan Iyengar, Micha, J-S., Robach, O., Grennerat, F. & Castelnau, O., 2018 feb 1, I : Scripta Materialia. 144, February 2018, s. 1-4 4 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  46. FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper

    Mike Olsson, Henrik Persson, Mathias Agmell, Volodymyr Bushlya & Jan Eric Ståhl, 2018 jan 1, Procedia CIRP. Vol. 72. s. 1427-1432 6 s. (Procedia CIRP).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

Föregående 1 2 3 4 5 6 7 8 ...15 Nästa