Mekanik

Organisation: avdelning

Fler filtreringsmöjligheter
  1. 2016
  2. Necking in single-crystal fcc copper nanobeams

    Aylin Ahadi & Solveig Melin, 2016, Proceedings to the 29th Nordic Seminar in Computational Mechanics. 4 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  3. On the Inertia Matrix of Hexapod Struts in the Joint-Space

    Behrouz Afzali Far & Per Lidström, 2016, (Unpublished) I : To be submitted.

    Forskningsoutput: TidskriftsbidragLetter

  4. Shear anisotropy in Si-Cu interfaces on the atomic scale

    Johansson, D. & Per Hansson, 2016, (Submitted) I : Computational Materials Science.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  5. Simulating nanoindentation of thin Cu films using molecular dynamics and peridynamics

    Aylin Ahadi, Per Hansson & Solveig Melin, 2016, Simulating nanoindentation of thin Cu films using molecular dynamics and peridynamics . 4 s. (Proseeding to  the 8th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  6. Size dependence of the Poisson's ratio in single-crystal fcc copper nanobeams

    Aylin Ahadi & Solveig Melin, 2016, I : Computational Materials Science. 111, s. 322-327

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  7. Tensile behavior of single-crystal nano-sized copper beams with voids

    Solveig Melin, Aylin Ahadi & Per Hansson, 2016, Tensile behavior of single-crystal nano-sized copper beams with voids . 4 s. (Proceedings to the 8th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  8. Vibrations and Dynamic Isotropy in Hexapods - Analytical Studies

    Behrouz Afzali Far, 2016

    Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

  9. 2015
  10. POISSON'S RATIO AT NANOSCALE IN SINGLE-CRYSTAL FCC COPPER

    Solveig Melin & Aylin Ahadi, 2015 okt. 4 s.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  11. A Class of Generalized Gough-Stewart Platforms Used for Effectively Obtaining Dynamic Isotropy - an Analytical Study

    Behrouz Afzali Far & Per Lidström, 2015, 2015 4th International Conference on Mechanics and Control Engineering (ICMCE 2015). EDP Sciences, Vol. 35. 02002. (MATEC Web of Conferences ; vol. 35).

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  12. Advances in Multiscale Modeling and Computational Mechanics

    Liao, N., Yang, P., Kristina Nilsson & Xu, B., 2015, I : Advances in Mechanical Engineering. 7, 2, 959836.

    Forskningsoutput: TidskriftsbidragDebate/Note/Editorial

  13. A Joint-Space Parametric Formulation for the Vibrations of Symmetric Gough-Stewart Platforms

    Behrouz Afzali Far & Per Lidström, 2015, Progress In Systems Engineering. Selvaraj, H., Zydek, D. & Chmaj, G. (red.). Springer, Vol. 1089. s. 323-329

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  14. A note on frame indifference and material isomorphism for simple materials

    Per Lidström, 2015, I : Mathematics and Mechanics of Solids. 20, 4, s. 461-479

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  15. Characterization of probe contact effects on diffuse reflectance spectroscopy measurements

    Nina Reistad, Mayjonade, M., Aylin Ahadi & Andersson-Engels, S., 2015, BioPhotonics South America (SPIE Proceedings). SPIE, Vol. 9531. s. 953143 8 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  16. Influence of the crystallographic orientation and thickness of thin copper coatings during nanoindentation

    Per Hansson, 2015, I : Engineering Fracture Mechanics. 150, s. 143-152

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  17. 2014
  18. Elastic nanobeam modelled using peridynamics - length scale effects

    Bourreau, S., Roca, H., Aylin Ahadi & Solveig Melin, 2014 okt 22.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  19. Indentation of thin copper film using peridynamics

    Roca, H., Bourreau, S., Aylin Ahadi & Solveig Melin, 2014 okt 22. 4 s.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  20. Simulation and biomechanical characterization of indentation on human skin

    Mayjonade, M., Nina Reistad & Aylin Ahadi, 2014 okt.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  21. Fatigue testing and microstructural characterization of tungsten heavy alloy Densimet 185

    Pasalic, M., Rustempasic, F., Srinivasan Iyengar, Solveig Melin & Noah, E., 2014, I : International Journal of Refractory Metals and Hard Materials. 42, s. 163-168

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  22. Identification of plasticity constants from orthogonal cutting and inverse analysis

    Agmell, M., Aylin Ahadi & Jan-Eric Ståhl, 2014, I : Mechanics of Materials. 77, s. 43-51

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  23. Linearized equations of motion in multibody dynamics

    P. Lidström, 2014, I : Mathematics and Mechanics of Solids. 21, 4, s. 454-505 52 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  24. Nanoindentation of thin copper coatings

    Per Hansson & Jansson, M., 2014, Materials Structure & Micromechanics of Fracture VII (Key Engineering Materials). Trans Tech Publications Ltd, Vol. 592-593. s. 417-420

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  25. On the equations of motion for curved slender beams using tubular coordinates

    Per Lidström, 2014, I : Mathematics and Mechanics of Solids. 19, 7, s. 758-804

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  26. On the use of control volumes in continuum mechanics

    Per Lidström, 2014, I : Mathematics and Mechanics of Solids. 19, 5, s. 524-554

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  27. Stress analysis of highly constrained copper strips with through crack shaped voids using molecular dynamics

    Johansson, D., Per Hansson & Solveig Melin, 2014, Materials Structure & Micromechanics of Fracture VII (Key Engineering Materials). Trans Tech Publications Ltd, Vol. 592-593. s. 43-46

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  28. 2013
  29. Analysis of volume-average relations in continuum mechanics

    Aylin Ahadi & Per Lidström, 2013, I : Mathematics and Mechanics of Solids. 18, 5, s. 476-505

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  30. Development and Analysis of an Active-Mirror Unit

    Behrouz Afzali Far, 2013, (Unpublished) [Publisher information missing].

    Forskningsoutput: Bok/rapportRapport

  31. Fatigue properties and characterization of tungsten heavy alloys IT180 & D176

    Lorenzo, P., Miralda, M., Srinivasan Iyengar, Solveig Melin & Noah, E., 2013, I : International Journal of Refractory Metals and Hard Materials. 41, s. 250-258

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  32. Modeling and simulation of the mechanical response from nanoindentation test of DNA-filled viral capsids

    Aylin Ahadi, Johansson, D. & Alex Evilevitch, 2013, I : Journal of Biological Physics. 39, 2, s. 183-199

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  33. Modeling effect of surface roughness on nanoindentation tests

    Chen, L., Aylin Ahadi, Jinming Zhou & Jan-Eric Ståhl, 2013, Procedia CIRP. Elsevier, Vol. 8. s. 334-339

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  34. On the relative rotation of rigid parts and the visco-elastic torsion bushing element

    Per Lidström, 2013, I : Mathematics and Mechanics of Solids. 18, 8, s. 788-802

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  35. 2012
  36. Analysis of the volume averaging relations in continuum mechanics

    Aylin Ahadi & Per Lidström, 2012, I : Mathematics and Mechanics of Solids. 18, 5, s. 476-505 29 s.

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  37. Characteristics of short fatigue crack growth in the vicinity of a low angle grain boundary

    Per Hansson & Solveig Melin, 2012, I : International Journal of Fatigue. 36, 1, s. 59-67

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  38. Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects

    Chen, L., Aylin Ahadi, Jinming Zhou & Jan-Eric Ståhl, 2012, (Submitted) Swedish Production Symposium, SPS12 : Proceedings. The Swedish Production Academy, 8 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  39. Characterization of stainless steel SS-1672

    Noori, F. & Solveig Melin, 2012, I : Journal of Chemical Engineering and Materials Science. 3, 4 (November), s. 45-57

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  40. Hur vänder man en kurs? Betraktelser över grundkursen i mekanik för industriell ekonomi våren 2012- kvalitativa och kvantitativa observationer från CEQ-utvärderingen

    Aylin Ahadi, Solveig Melin & Nina Reistad, 2012, (Submitted) LTHs 7:e Pedagogiska Inspirationskonferens. 4 s.

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  41. Ignition temperatures for Cu-Al and Ni-Al reactions in elemental powder mixtures using Differential Scanning Calorimetry

    Sina, H., Srinivasan Iyengar & Solveig Melin, 2012, Advances in powder metallurgy & particulate materials - 2012 : proceedings of the 2012 International Conference on Powder Metallurgy & Particulate Materials : PowderMet 2012, June 10-13, Nashville. Donaldson, I. & Mares, N. T. (red.). Metal Powder Industries Federation, Princeton, New Jersey, Vol. 09. s. 09-40-09-51

    Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

  42. Linear coordinates in multibody dynamics

    Per Lidström, 2012, I : Mathematics and Mechanics of Solids. 17, 6, s. 587-623

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  43. Modelling Subsurface Deformation in High Speed Machining of Inconel 718

    Agmell, M., Jinming Zhou, Aylin Ahadi, Volodymyr Bushlya, Peng, R. L. & Jan-Eric Ståhl, 2012. 9 s.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet

  44. On the equations of motion in constrained multibody dynamics

    Per Lidström, 2012, I : Mathematics and Mechanics of Solids. 17, 3, s. 209-242

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  45. On the equations of motion in multibody dynamics

    Per Lidström, 2012, I : Mathematics and Mechanics of Solids. 17, 2, s. 165-205

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  46. On the principle of virtual power in continuum mechanics

    Per Lidström, 2012, I : Mathematics and Mechanics of Solids. 17, 5, s. 516-540

    Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

  47. On the Solution of Linear Equations

    Aylin Ahadi & Per Lidström, 2012, (Unpublished) I : Historielärarnas Förenings Årsskrift.

    Forskningsoutput: TidskriftsbidragLetter

  48. Simulation of indenter geometry effects in nanoindentation

    Chen, L., Aylin Ahadi & Jinming Zhou, 2012, (Submitted). 4 s.

    Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivet