Combustion characteristics of gasoline DICI engine in the transition from HCCI to PPC: Experiment and numerical analysis

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift


Both numerical simulations and experiments were conducted in a heavy-duty DICI engine, with PRF81 as a gasoline surrogate, to investigate how the fuel stratification, auto-ignition and combustion are affected by the start of injection (SOI). The intake air temperature was adjusted to keep the combustion phasing constant when the SOI was swept from −100 to −20 oCA ATDC, covering different regimes of combustion, from HCCI to PPC. It is found that in the HCCI regime the combustion process is less sensitive to the variation of SOI since the fuel/air mixture is fairly homogeneous. The fuel/air mixture is under fuel-lean condition and the required intake temperature for a constant CA50 is the highest. In the PPC regime there is an optimal SOI window, within which the required intake temperature is the lowest to maintain a constant CA50 and the engine thermal efficiency is the highest. The optimal operation window starts at the SOI when all fuel is injected into the piston bowl and ends when the fuel injection is towards the bottom wall of the piston bowl, which results in a high heat transfer losses. The SOI window for optimal engine operation is expected to be fuel injector and piston bowl geometry dependent. During the transition regime, the fuel is injected towards the piston head in the squish region. The combustion process is highly sensitive to SOI due to the high sensitivity of fuel distribution in the cylinder to SOI. The engine thermal efficiency is the lowest due to the incomplete oxidation of fuel in the squish region.


Enheter & grupper
Externa organisationer
  • Shanghai Jiao Tong University

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Energiteknik


Sidor (från-till)922-937
Antal sidor16
StatusPublished - 2019 okt 15
Peer review utfördJa