Customisable 3D printed microfluidics for integrated analysis and optimisation

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Abstract

The formation of smart Lab-on-a-Chip (LOC) devices featuring integrated sensing optics is currently hindered by convoluted and expensive manufacturing procedures. In this work, a series of 3D-printed LOC devices were designed and manufactured via stereolithography (SL) in a matter of hours. The spectroscopic performance of a variety of optical fibre combinations were tested, and the optimum path length for performing Ultraviolet-visible (UV-vis) spectroscopy determined. The information gained in these trials was then used in a reaction optimisation for the formation of carvone semicarbazone. The production of high resolution surface channels (100-500 μm) means that these devices were capable of handling a wide range of concentrations (9 μM-38 mM), and are ideally suited to both analyte detection and process optimisation. This ability to tailor the chip design and its integrated features as a direct result of the reaction being assessed, at such a low time and cost penalty greatly increases the user's ability to optimise both their device and reaction. As a result of the information gained in this investigation, we are able to report the first instance of a 3D-printed LOC device with fully integrated, in-line monitoring capabilities via the use of embedded optical fibres capable of performing UV-vis spectroscopy directly inside micro channels.

Detaljer

Författare
  • T. Monaghan
  • M. J. Harding
  • R. A. Harris
  • R. J. Friel
  • S. D R Christie
Externa organisationer
  • Loughborough University
  • University of Leeds
Originalspråkengelska
Sidor (från-till)3362-3373
Antal sidor12
TidskriftLab on a Chip - Miniaturisation for Chemistry and Biology
Volym16
Utgivningsnummer17
StatusPublished - 2016
PublikationskategoriForskning
Peer review utfördJa
Externt publiceradJa