Dowel deformations in multi-dowel LVL-connections under moment loading

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Abstract

The aim of the experimental study presented herein is the assessment and quantification of the behavior of individual dowels in multi-dowel connections loaded by a bending moment. For this purpose, double-shear, steel-to-timber connections with nine steel dowels arranged in different patterns and with different dowel diameters were tested in four-point bending. In order to achieve a ductile behavior with up to 7° relative rotation, the connections were partly reinforced with self-tapping screws. The reinforcement did not influence the global load–deformation behavior, neither for dowel diameters of 12 mm nor for 20 mm, as long as cracking was not decisive. The deformation of the individual dowels was studied by means of a non-contact deformation measurement system. Thus, the crushing deformation, that is, the deformation at the steel plate, and the bending deformation of the dowels could be quantified. In the case of 12 mm dowels, the bending deformation was larger than the crushing deformation, while it was smaller in the case of 20 mm dowels. Moreover, dowels loaded parallel to the grain showed larger bending deformations than dowels loaded perpendicular to the grain. This indicates that the loading of the individual dowels in the connection differs depending on their location.

Detaljer

Författare
  • Tomas Bader
  • Michael Schweigler
  • Georg Hochreiner
  • Erik Serrano
  • Bertil Enquist
  • Michael Dorn
Enheter & grupper
Forskningsområden

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Husbyggnad

Nyckelord

Originalspråkengelska
Sidor (från-till)216-231
TidskriftWood Material Science & Engineering
Volym10
Utgivningsnummer3
StatusPublished - 2015
PublikationskategoriForskning
Peer review utfördJa