Energy considerations for a SSF-based softwood ethanol plant

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Standard

Energy considerations for a SSF-based softwood ethanol plant. / Wingren, Anders; Galbe, Mats; Zacchi, Guido.

I: Bioresource Technology, Vol. 99, Nr. 7, 2008, s. 2121-2131.

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Harvard

APA

CBE

MLA

Vancouver

Author

RIS

TY - JOUR

T1 - Energy considerations for a SSF-based softwood ethanol plant

AU - Wingren, Anders

AU - Galbe, Mats

AU - Zacchi, Guido

PY - 2008

Y1 - 2008

N2 - Ethanol can be produced from softwood by steam pretreatment followed by simultaneous saccharification and fermentation (SSF). However, the final ethanol concentration in the SSF step is usually rather low (around 4 wt%) and as a result the energy demand in the downstream processing will be high. In an effort to reduce the energy consumption various alternatives for the downstream processing part of the process were evaluated from a technical-economic standpoint. With experimental data as a basis, the whole process was modelled using the commercial flowsheeting program Aspen Plus. The results were used in the subsequent economic evaluation, which was performed using Icarus process evaluator. A base case configuration, consisting of three thermally coupled distillation columns and multiple-effect evaporation was established. For a feed containing 3.5% ethanol (w/w) to the distillation step, the overall process demand for steam was estimated to be 19.0 MJ/L ethanol and the ethanol production cost 4.14 SEK/L (0.591 USD/L). Different alternatives were considered, such as integration of a stripper with the evaporation step, increasing the number of evaporation effects and the application of mechanical vapour recompression to the evaporation step. Replacement of evaporation with anaerobic digestion was also considered. Among these alternatives, evaporation using mechanical vapour recompression and the anaerobic digester alternative both resulted in significantly lower energy demand than the base case, 10.2 and 9.8 MJ/L, respectively, and productions costs of 3.82 (0.546 USD/L) and 3.84 SEK/L (0.549 USD/L).

AB - Ethanol can be produced from softwood by steam pretreatment followed by simultaneous saccharification and fermentation (SSF). However, the final ethanol concentration in the SSF step is usually rather low (around 4 wt%) and as a result the energy demand in the downstream processing will be high. In an effort to reduce the energy consumption various alternatives for the downstream processing part of the process were evaluated from a technical-economic standpoint. With experimental data as a basis, the whole process was modelled using the commercial flowsheeting program Aspen Plus. The results were used in the subsequent economic evaluation, which was performed using Icarus process evaluator. A base case configuration, consisting of three thermally coupled distillation columns and multiple-effect evaporation was established. For a feed containing 3.5% ethanol (w/w) to the distillation step, the overall process demand for steam was estimated to be 19.0 MJ/L ethanol and the ethanol production cost 4.14 SEK/L (0.591 USD/L). Different alternatives were considered, such as integration of a stripper with the evaporation step, increasing the number of evaporation effects and the application of mechanical vapour recompression to the evaporation step. Replacement of evaporation with anaerobic digestion was also considered. Among these alternatives, evaporation using mechanical vapour recompression and the anaerobic digester alternative both resulted in significantly lower energy demand than the base case, 10.2 and 9.8 MJ/L, respectively, and productions costs of 3.82 (0.546 USD/L) and 3.84 SEK/L (0.549 USD/L).

KW - energy optimization

KW - SSF

KW - process

KW - ethanol

KW - economics

U2 - 10.1016/j.biortech.2007.05.058

DO - 10.1016/j.biortech.2007.05.058

M3 - Article

VL - 99

SP - 2121

EP - 2131

JO - Bioresource Technology

JF - Bioresource Technology

SN - 0960-8524

IS - 7

ER -