High-Speed Imaging of Spray Formation and Combustion in an Optical Engine: Effects of Injector Aging and TPGME as a Fuel Additive

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Abstract

High-speed imaging of fuel sprays and combustion is conducted on a light-duty optical engine to investigate the effects of injector aging, with a focus on soot. The spray behaviors of one new and one aged injector are compared using Mie-scattering. In addition to this, the combustion process of a baseline diesel fuel and a blend with TPGME (tripropylene glycol monomethyl ether) are compared using natural luminosity (NL) imaging. TPGME is an oxygenated additive which can be used to reduce soot emissions. X-ray tomography of the two injectors demonstrates that the aging does not lead to significant geometry differences, nor to formation of dense internal nozzle deposits. Both injectors show similar liquid penetration and spreading angle. However, the aged injector shows a prolonged injection and more fuel dribbling after the injection events, leading to a higher injection quantity. The fuel quantity difference shows a larger impact on the NL at low load than the TPGME additive, indicating that the in-cylinder temperature is more important for soot oxidation than oxygen concentration under these conditions. At medium load, the NL is much less sensitive to small temperature variations, while the TPGME is more effective for soot reduction.

Detaljer

Författare
Enheter & grupper
Externa organisationer
  • Friedrich-Alexander University Erlangen-Nürnberg
Forskningsområden

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Atom- och molekylfysik och optik
  • Kemiska processer
Originalspråkengelska
Artikelnummer3105
TidskriftEnergies
Volym13
Utgåva nummer12
StatusPublished - 2020 jun 16
PublikationskategoriForskning
Peer review utfördJa