Optical Study of Fuel Spray Penetration and Initial Combustion Location under PPC Conditions

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Abstract

Low temperature combustion modes, such as Homogeneous Charge Compression Ignition (HCCI) and Partially Premixed Combustion (PPC), have been researched over recent decades since the concepts show promise for high efficiency and low emissions compared to conventional diesel combustion. PPC is an intermediate combustion type ranging from HCCI-like combustion to diesel-like combustion. The purpose of this paper is to study optically how the combustion and ignition are affected by different start of injection (SOI) timings. The study is carried out in an optically accessible heavy-duty single-cylinder engine with swirl. The intake pressure was kept constant while the intake temperature was varied to keep the combustion phasing (CA50) constant at ∼3 CAD atdc during an SOI sweep. The fuel used is a mix of primary reference fuels with octane number 81. To determine where the combustion starts, high-speed combustion imaging is used to detect the natural luminosity. The liquid spray is detected by illuminating the combustion chamber by laser diodes and utilizing the Mie scattering. The results indicate that the change in ignition behavior is affected by the interaction between the fuel spray and the piston, as different fuel/air ratios are formed in the squish region and in the bowl.

Detaljer

Författare
Enheter & grupper
Forskningsområden

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Energiteknik
Originalspråkengelska
TidskriftSAE Technical Papers
Volym2017-March
Utgåva nummerMarch
StatusPublished - 2017 mar 28
PublikationskategoriForskning
Peer review utfördJa