Parametric Study of Mould Risk in the Climate Envelope of Timber Buildings using Hydrothermal simulations

Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

Standard

Parametric Study of Mould Risk in the Climate Envelope of Timber Buildings using Hydrothermal simulations. / Ranefjärd, Oskar; Rosenkilde, Anders; Frühwald Hansson, Eva.

Thermal Buildings XIV 2019. 2019.

Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

Harvard

APA

CBE

MLA

Vancouver

Author

RIS

TY - GEN

T1 - Parametric Study of Mould Risk in the Climate Envelope of Timber Buildings using Hydrothermal simulations

AU - Ranefjärd, Oskar

AU - Rosenkilde, Anders

AU - Frühwald Hansson, Eva

PY - 2019/12/6

Y1 - 2019/12/6

N2 - With global efforts in reducing energy consumption, house manufacturers are seeking use of new materials and design solutions. However, some believe this will increase the risk of mould. One way to assess the mould risk is to use a hygrothermal software for simulating the climate envelopes’ moisture performance. But as with all simulation, the quality of the output can never be better than the quality of the input. In moisture design, some parameters are only based on engineering judgement, which increases the uncertainty. The purpose of this paper is therefore to examine the risks and uncertainties of moisture safety design using hygrothermal simulations. The parametric study is done by using a factorial design and a mould risk assessment tool, Mould – Resistance Design (MRD), to identify what parameters are most influential in affecting the mould risk. The study includes common mould risks, as rain leakage and small air gaps, but also typical ways in which timber house manufacturers try to improve the moisture resistance. Some of the results were quite expected, e.g. the mould risk increases with water leakage closer to the timber frame. But the methodology also showed that changing the façade insulation to a PIR- insulation increases the mould risk more than the risk is decreased by the increased thermal insulation. The study also proves a point in that a lot of theincluded factors are just assumptions based on estimates while the real values are unknown, and they still are the most influential. Other parameters thathad significant importance are often neglected in moisture design, for instance the coefficient regarding wind driven rain and the temperature of the cladding.This paper further acknowledges that there are many and big obstacles in performing a good moisture safety assessment.

AB - With global efforts in reducing energy consumption, house manufacturers are seeking use of new materials and design solutions. However, some believe this will increase the risk of mould. One way to assess the mould risk is to use a hygrothermal software for simulating the climate envelopes’ moisture performance. But as with all simulation, the quality of the output can never be better than the quality of the input. In moisture design, some parameters are only based on engineering judgement, which increases the uncertainty. The purpose of this paper is therefore to examine the risks and uncertainties of moisture safety design using hygrothermal simulations. The parametric study is done by using a factorial design and a mould risk assessment tool, Mould – Resistance Design (MRD), to identify what parameters are most influential in affecting the mould risk. The study includes common mould risks, as rain leakage and small air gaps, but also typical ways in which timber house manufacturers try to improve the moisture resistance. Some of the results were quite expected, e.g. the mould risk increases with water leakage closer to the timber frame. But the methodology also showed that changing the façade insulation to a PIR- insulation increases the mould risk more than the risk is decreased by the increased thermal insulation. The study also proves a point in that a lot of theincluded factors are just assumptions based on estimates while the real values are unknown, and they still are the most influential. Other parameters thathad significant importance are often neglected in moisture design, for instance the coefficient regarding wind driven rain and the temperature of the cladding.This paper further acknowledges that there are many and big obstacles in performing a good moisture safety assessment.

M3 - Paper in conference proceeding

BT - Thermal Buildings XIV 2019

T2 - 2019 Buildings XIV International Conference

Y2 - 9 December 2019 through 12 December 2019

ER -