Rigid biobased polycarbonates with good processability based on a spirocyclic diol derived from citric acid

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Standard

Rigid biobased polycarbonates with good processability based on a spirocyclic diol derived from citric acid. / Bonjour, Olivier; Liblikas, Ilme; Pehk, Tõnis; Truong, Khai-Nghi; Rissanen, Kari; Vares, Lauri; Jannasch, Patric.

I: Green Chemistry, Vol. 22, Nr. 12, 2020, s. 3940-3951.

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift

Harvard

APA

CBE

MLA

Vancouver

Author

Bonjour, Olivier ; Liblikas, Ilme ; Pehk, Tõnis ; Truong, Khai-Nghi ; Rissanen, Kari ; Vares, Lauri ; Jannasch, Patric. / Rigid biobased polycarbonates with good processability based on a spirocyclic diol derived from citric acid. I: Green Chemistry. 2020 ; Vol. 22, Nr. 12. s. 3940-3951.

RIS

TY - JOUR

T1 - Rigid biobased polycarbonates with good processability based on a spirocyclic diol derived from citric acid

AU - Bonjour, Olivier

AU - Liblikas, Ilme

AU - Pehk, Tõnis

AU - Truong, Khai-Nghi

AU - Rissanen, Kari

AU - Vares, Lauri

AU - Jannasch, Patric

N1 - Submitted: 09 Mar 2020 Accepted: 27 May 2020 First published: 28 May 2020

PY - 2020

Y1 - 2020

N2 - Introducing biobased polymers from renewable sources for use as high-performance thermoplastics with high demands on mechanical rigidity, transparency, thermal stability, as well as good processability, is a significant challenge. In the present work we have designed and prepared a rigid biobased bis-spirocylic diol by di-cycloketalization of a bicyclic diketone (cis-bicyclo[3.3.0]octane-3,7-dione, obtained from citric acid) using trimethylolpropane. This spiro-diol monomer has two reactive primary hydroxyl groups and the synthesis from inexpensive biobased starting materials is straightforward and readily upscalable, involving no chromatographic purification. In order to explore the usefulness of the new monomer, it was employed in melt polycondensations with diphenylcarbonate at up to 280 °C to form rigid fully amorphous polycarbonates (PCs). Molecular weights (MWs) up to Mn = 28 kg mol-1 were achieved, and thermal and dynamic mechanical measurements showed glass transitions up to Tg = 100 °C, with no thermal decomposition until Td ~ 350 °C. Solvent cast films had excellent mechanical flexibility and strength, as well as a high transparency with only slight coloration. Results by dynamic melt rheology implied that the high-MW PCs had a good processability at 170 °C, with a stable shear modulus over time, but started to degrade via chain scission reactions when the temperature approached 200 °C. In conclusion, the present work demonstrates the straightforward preparation of the citric acid-based spiro-diol, and indicates that it is an efficient building block for the preparation of rigid biobased PCs and other condensation polymers.

AB - Introducing biobased polymers from renewable sources for use as high-performance thermoplastics with high demands on mechanical rigidity, transparency, thermal stability, as well as good processability, is a significant challenge. In the present work we have designed and prepared a rigid biobased bis-spirocylic diol by di-cycloketalization of a bicyclic diketone (cis-bicyclo[3.3.0]octane-3,7-dione, obtained from citric acid) using trimethylolpropane. This spiro-diol monomer has two reactive primary hydroxyl groups and the synthesis from inexpensive biobased starting materials is straightforward and readily upscalable, involving no chromatographic purification. In order to explore the usefulness of the new monomer, it was employed in melt polycondensations with diphenylcarbonate at up to 280 °C to form rigid fully amorphous polycarbonates (PCs). Molecular weights (MWs) up to Mn = 28 kg mol-1 were achieved, and thermal and dynamic mechanical measurements showed glass transitions up to Tg = 100 °C, with no thermal decomposition until Td ~ 350 °C. Solvent cast films had excellent mechanical flexibility and strength, as well as a high transparency with only slight coloration. Results by dynamic melt rheology implied that the high-MW PCs had a good processability at 170 °C, with a stable shear modulus over time, but started to degrade via chain scission reactions when the temperature approached 200 °C. In conclusion, the present work demonstrates the straightforward preparation of the citric acid-based spiro-diol, and indicates that it is an efficient building block for the preparation of rigid biobased PCs and other condensation polymers.

U2 - 10.1039/D0GC00849D

DO - 10.1039/D0GC00849D

M3 - Article

VL - 22

SP - 3940

EP - 3951

JO - Green Chemistry

JF - Green Chemistry

SN - 1463-9270

IS - 12

ER -