The Effect of Splitting Timing on Mixing in a Jet with Double Injections: A Large-Eddy Simulation Study

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift


We present large-eddy simulation (LES) of a high-pressure gas jet that is injecting into a quiescent inert environment. The injection is through a nozzle with a diameter of 1.35 mm. Four injection strategies are considered in which the results of a single continuous injection case are compared with those of double injection cases with different injection splitting timing. In all double injection cases, the injection pulsing interval is kept the same, and the total injected mass is equal to that of the single injection case. On the other hand,
the splitting timing is varied to investigate the effects of various injection splitting strategies on the mixture formation and the penetration length of the jet. Results show that the jet penetration length is not so sensitive to the splitting timing whereas the mixing quality can significantly change as a result of shifting the onset of injection splitting toward the end of injection. Especially, it is found that by adopting a post-injection strategy where a single injection splits into the main injection and late small injection near the end of injection period the mixing between the injected gas and ambient air is significantly improved. This trend is not as obvious when the injection splitting timing shifts toward the beginning or even in the middle of injection period. The increase of entrainment in the tail of each injection is one of the underlying physics in the mixing improvement in double injection cases. In addition to that, splitting a single injection into two smaller injections increases the surrounding area of the jet and also stretches it along the axial direction. It can potentially increase the mixing of injected gas with the ambient air.


Enheter & grupper
Externa organisationer
  • University of Birmingham

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Energiteknik


Sidor (från-till)1157-1171
TidskriftFlow, Turbulence and Combustion
Utgåva nummer4
Tidigt onlinedatum2018 apr 24
StatusPublished - 2018 dec
Peer review utfördJa

Relaterad forskningsoutput

Ahmad Hadadpour, 2020 okt 30, Division of Fluid Mechanics, Department of Energy Sciences, Lund Institute of Technology, Lund University. 206 s.

Forskningsoutput: AvhandlingDoktorsavhandling (sammanläggning)

Visa alla (1)