Validation of standard ASTM F2732 and comparison with ISO 11079 with respect to comfort temperature ratings for cold protective clothing

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskrift


American standard ASTM F2732 estimates the lowest environmental temperature for thermal comfort for cold weather protective clothing. International standard ISO 11079 serves the same purpose but expresses cold stress in terms of required clothing insulation for a given cold climate. The objective of this study was to validate and compare the temperature ratings using human subject tests at two levels of metabolic rates (2 and 4 MET corresponding to 116.4 and 232.8 W/m(2)). Nine young and healthy male subjects participated in the cold exposure at 3.4 and -30.6 °C. The results showed that both standards predict similar temperature ratings for an intrinsic clothing insulation of 1.89 clo and for 2 MET activity. The predicted temperature rating for 2 MET activity is consistent with test subjects' thermophysiological responses, perceived thermal sensation and thermal comfort. For 4 MET activity, however, the whole body responses were on the cold side, particularly the responses of the extremities. ASTM F2732 is also limited due to its omission and simplification of three climatic variables (air velocity, radiant temperature and relative humidity) and exposure time in the cold which are of practical importance.


Enheter & grupper

Ämnesklassifikation (UKÄ) – OBLIGATORISK

  • Produktionsteknik, arbetsvetenskap och ergonomi


Sidor (från-till)44-53
TidskriftApplied Ergonomics
Utgåva nummerOnline 17 July 2014
StatusPublished - 2015
Peer review utfördJa

Relaterad forskningsoutput

Chuansi Gao, Amitava Halder, Kalev Kuklane & Li-Yen Lin, 2016 dec, 6th International Conference on the Physiology and Pharmacology of Temperature Regulation. Slovenia, s. 165 1 s.

Forskningsoutput: Kapitel i bok/rapport/Conference proceedingKonferenspaper i proceeding

Visa alla (1)