Industriell Produktion

2025

Study of initial notch wear during turning of stainless steel with CVD Al₂O₃/Ti(C,N) coated cemented carbide tools

Sirtuli, L. J., Boing, D., Bushlya, V. & Norgren, S., 2025 juni, I: International Journal of Refractory Metals and Hard Materials. 129, 10 s., 107116.

Forskningsoutput: Tidskriftsbidrag › Översiktsartikel › Peer review

Öppen tillgång

Tool wear and tool protection in metal cutting: in-process interaction between workpiece, tool, and environment

Bidragets översatta titel : Kemiska och termodynamiska interaktioner mellan verktyg och arbetsmaterialBjerke, A., 2025 maj 28, Lund: Department of Industrial and Mechanical Sciences. 100 s.

Forskningsoutput: Avhandling › Doktorsavhandling (sammanläggning)

Fil

15 Nedladdningar (Pure)

Residual stresses and microstructure in fine grained cemented carbides doped with Cr and Ti

Weidow, J., Yildiz, A. B., Olsson, G., Lilja, V., Sten, S., Borgh, I., Hedström, P., Kritikos, M., Lindberg, F., Coronel, E., Kelleher, J., Mayweg, D., Thuvander, M. & Norgren, S., 2025 apr., I: International Journal of Refractory Metals and Hard Materials. 128, 107005.

Forskningsoutput: Tidskriftsbidrag › Översiktsartikel › Peer review

Öppen tillgång

Understanding the competitive nanostructure evolution in V-doped hard metals by in-situ small-angle neutron scattering and thermodynamic-based modelling

Yildiz, A. B., Rolland, M. B., Babu, R. P., Cubitt, R., Norgren, S. & Hedström, P., 2025 apr., I: Acta Materialia. 287, 120773.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Analysis of tool wear in micromilling Ti6Al4V and its impact on generated surface integrity

Gonçalves, M. C. C., Alsters, R., Curtis, D., Bushlya, V., M'Saoubi, R. & Ghadbeigi, H., 2025 mars 1, (E-pub ahead of print) I: Wear. 8 s., 205955.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

The role of tool edge geometry on material removal and surface integrity in cutting metal matrix composites

Tian, C., Weng, J., Zhuang, K., Xu, D., Zhou, J. & M'Saoubi, R., 2025 mars, I: Journal of Manufacturing Processes. 137, s. 135-149 15 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Quantification of tool wear mechanisms in machining: the case of controlled-microstructure AISI 316L

Hrechuk, A., Slipchenko, K., Maistro, G. & Bushlya, V., 2025 feb. 28, (E-pub ahead of print) I: Wear. 17 s., 205944.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Impact of cutting tool and workpiece material on initial notch wear in turning

Sirtuli, L. J., Lindberg, F., Boing, D., Bushlya, V. & Norgren, S., 2025 feb. 17, (E-pub ahead of print) I: Wear. 10 s., 205942.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Influence of the design of Ti (C, N)-based cermets with alternative binders on their performance and wear in milling

Premkumar, V. B. K., Chalkiadakis, E., M'Saoubi, R. & Bushlya, V., 2025 feb. 14, (E-pub ahead of print) I: Wear. 205910.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Wear behaviour of PVD (Ti,Si)N-(Ti,Al)N coated cemented carbide in down milling pearlitic compacted graphite iron

Bello Bermejo, J. M., Lindvall, R., Saatçi, B., Ståhl, J. E., Åberg, L. M., Bohlin, O. & Windmark, C., 2025 feb. 12, (E-pub ahead of print) I: Wear. 14 s., 205891.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Performance and wear mechanisms of TiAlN-NbN coated cemented carbide in milling Ti6Al4V with different cooling and lubrication approaches

Lindvall, R., Casas Gayubo, J., Gutnichenko, O., Auzenat, F., M'Saoubi, R. & Bushlya, V., 2025 feb. 1, (Accepted/In press) I: Wear. 9 s., 205846.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

On the wear mechanisms of uncoated and coated pcBN tools during turning of 17–4 PH martensitic stainless steel

Bjerke, A., Casas, J., Lenrick, F., Andersson, J. M., M'Saoubi, R. & Bushlya, V., 2025 feb., I: International Journal of Refractory Metals and Hard Materials. 127, 8 s., 106984.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Observation of thickness-independent ultrafast relaxation times in MPCVD few-layer graphene

Ribeiro, T. M., Magalhães, T. E. C., Kulyk, B., Carvalho, A. F., Nilsson, S., Feuk, H., Fernandes, A. J. S., Costa, F., Guerreiro, P. T. & Crespo, H., 2025 jan., I: Carbon. 232, 119700.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Analysis and monitoring the initial tool damage and coating failure when hard milling Vanadis 4E with TiAlN coated PcBN

Gutnichenko, O., Pozuelo, S. G., Llanes, L. & Bushlya, V., 2025, I: Procedia CIRP. 133, s. 322-327 6 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Effect of chromium doping on the grain boundary character of WC-Co

Emmanuel, M., Li, Z. L., Heptinstall, H., Gavalda-Diaz, O., M'saoubi, R., Persson, T., Norgren, S., Britton, T. B., Giuliani, F. & Marquardt, K., 2025, I: International Journal of Refractory Metals and Hard Materials. 126, 106954.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy

Yue, X., Chen, D., Krishnan, A., Lazar, I., Niu, Y., Golias, E., Wiemann, C., Gloskovskii, A., Schlueter, C., Jeromin, A., Keller, T. F., Tong, H., Ejnermark, S. & Pan, J., 2025, I: Journal of Materials Science and Technology. 205, s. 191-203 13 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Void formation driven by plastic strain partitioning during creep deformation of WC-Co

Weller, L., M'saoubi, R., Giuliani, F., Humphry-Baker, S. & Marquardt, K., 2025, I: International Journal of Refractory Metals and Hard Materials. 126, 106950.

Forskningsoutput: Tidskriftsbidrag › Översiktsartikel › Peer review

Öppen tillgång

2024

Machining of Compacted Graphite Iron: A review

Sirtuli, L. J., Bello Bermejo, J. M., Windmark, C., Norgren, S., Ståhl, J. E. & Boing, D., 2024 nov., I: Journal of Materials Processing Technology. 332, 118553.

Forskningsoutput: Tidskriftsbidrag › Översiktsartikel › Peer review

Öppen tillgång

On the wear mechanisms of uncoated and coated carbide tools in milling titanium alloys

Lindvall, R., Bello Bermejo, J. M., Bjerke, A., Andersson, J. M., Vikenadler, E., M'Saoubi, R. & Bushlya, V., 2024 nov., I: International Journal of Refractory Metals and Hard Materials. 124, 14 s., 106806.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Surface engineering in materials processing

Liao, Z., M'saoubi, R., Chi Fai Cheung, B. & Guo, P., 2024 nov., I: Journal of Materials Processing Technology. 332, 118551.

Forskningsoutput: Tidskriftsbidrag › Debate/Note/Editorial

In situ Characterization of Deformation Mechanisms in Harmonic Structure Nickel

Sjögren-Levin, E., 2024 okt. 29, Lund: Department of Mechanical Engineering, Lund University. 91 s.

Forskningsoutput: Avhandling › Doktorsavhandling (sammanläggning)

Fil

58 Nedladdningar (Pure)

Optical Diagnostics in Energy Conversion Processes

Bi, R., 2024 sep. 27, Lund: Division of Combustion Physics, Department of Physics, Lund University.

Forskningsoutput: Avhandling › Doktorsavhandling (sammanläggning)

Fil

96 Nedladdningar (Pure)

An overview of the ESS cryogenic system and its design evolution

Weisend, J. G. & Hees, W., 2024 aug. 20, Cryogenic Technologies at the European Spallation Source: A Big Science Case Study. IOP Publishing

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Kapitel samlingsverk › Forskning › Peer review

Lessons learned and final comments

Weisend, J. G., 2024 aug., Cryogenic Technologies at the European Spallation Source: A Big Science Case Study. IOP Publishing, s. 12 1 s.

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Kapitel samlingsverk › Forskning › Peer review

On wear of TiAlN coated tools with and without NbN overlayer in machining titanium alloys

Lindvall, R., Lenrick, F., Andersson, J. M., M'Saoubi, R. & Bushlya, V., 2024 maj, I: International Journal of Machine Tools and Manufacture. 198, 104148.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Wear Mechanisms in Cutting Tools for Machining Applications: Interfacial Phenomena, Characterization, and Relation to Performance

Lindvall, R., 2024 apr. 10, Lund : Department of Mechanical Engineering and Sciences, Faculty of Engineering LTH, Lund University.. 270 s.

Forskningsoutput: Avhandling › Doktorsavhandling (sammanläggning)

Öppen tillgång

Fil

379 Nedladdningar (Pure)

A Concept from Sensor to Sustainability in Machining - An Interdisciplinary Approach over a Wide TRL Range

Ståhl, J. E., Mikkelsen, A., Lenrick, F., Sandsten, M., Alm, A. K. & Windmark, C., 2024 apr., Proceedings of the 11th Swedish Production Symposium (SPS2024): Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning. Andersson, J., Joshi, S., Malmskold, L. & Hanning, F. (red.). IOS Press, s. 148-170 23 s. (Advances in Transdisciplinary Engineering; vol. 52).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

A Methodology Using Monte-Carlo Simulation on Nanoindentation Deconvolution for Metal Classification

Bello bermejo, J. M., Windmark, C., Gutnichenko, O. & Ståhl, J.-E., 2024 apr., Proceedings of the 11th Swedish Production Symposium (SPS2024). Andersson, J., Joshi, S., Malmsköld, L. & Hanning, F. (red.). IOS Press, Vol. 52. s. 613 - 627 (Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Kapitel samlingsverk › Forskning › Peer review

Öppen tillgång

Enhanced steel machining performance using texture-controlled CVD alpha-alumina coatings: Fundamental degradation mechanisms

Shoja, S., Bäcke, O., Fazi, A., Norgren, S., Andrén, H. O. & Halvarsson, M., 2024 apr., I: International Journal of Machine Tools and Manufacture. 197, 104137.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Relationship Between Tool Temperature Distribution and Stagnation Point Behavior for Different Process Factors in Machining Operations

Ståhl, J. E., Bylund, M. S., Alm, P. & Kryzhanivskyy, V., 2024 apr., Moving Integrated Product Development to Service Clouds in the Global Economy - Proceedings of the 21st ISPE Inc. International Conference on Concurrent Engineering, CE 2014. Andersson, J., Joshi, S., Malmskold, L. & Hanning, F. (red.). IOS Press, s. 69-89 21 s. (Advances in Transdisciplinary Engineering; vol. 52).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

Strategies for Effective Chip Management in Machining of Ductile Cast Iron

Jönsson, A., Aliboni, G. C. F., Windmark, C. & Ståhl, J. E., 2024 apr., Proceedings of the 11th Swedish Production Symposium (SPS2024): Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning. Andersson, J., Joshi, S., Malmskold, L. & Hanning, F. (red.). IOS Press, s. 50-61 12 s. (Advances in Transdisciplinary Engineering; vol. 52).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy

A. B. Marçal, L., Dierks, H., Bushlya, V., Lazar, I., Dzhigaev, D., Zhe, R., Rysov, R., Björling, A., Sprung, M., Mikkelsen, A., Lenrick, F., M'Saoubi, R. & Wallentin, J., 2024 mars, I: Materials and Design. 239, 8 s., 112789.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Mechanical integrity of PVD TiAlN-coated PcBN: Influence of substrate bias voltage and microstructural assemblage

Gordon, S., Rodriguez-Suarez, T., Roa, J. J., M'Saoubi, R., Andersson, J. M., Jiménez-Piqué, E. & Llanes, L., 2024 feb. 15, I: Ceramics International. 50, 4, s. 6299-6308 10 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Wear mechanisms in Ti(C,N)-Al₂O₃ coated carbide during sustainable machining CGI

Lindvall, R., Diaz, K. M., Peng, R. L., Gutnichenko, O., Sirén, S., Magnusson Åberg, L., Norgren, S., M'Saoubi, R., Bushlya, V. & Ståhl, J. E., 2024 feb., I: International Journal of Refractory Metals and Hard Materials. 119, 106550.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

The Role of Microfibers and Liquid Aluminum in the Reaction between Boron Nitride and Tantalum Nitride

Rumiantseva, Y. Y., Lysovenko, S. O., Turkevych, V. Z., Klimchyk, P. P., Bilyavina, N. M., Bushlya, V. M., Savchenko, D. O., Klymenko, S. A. & Turkevych, D. V., 2024 jan. 18, I: Journal of Superhard Materials. 45, 6, s. 415-417 3 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Rapid acquisition of digital fingerprints of Ti-6Al-4V macrotexture from machining force measurement data

Childerhouse, T., Levano-Blanch, O., Zeng, X., Taylor, J., Premoli, D., Crawforth, P., M'Saoubi, R. & Jackson, M., 2024 jan., I: Materials Characterization. 207, 113550.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Strain and phase evolution in TiAlN coatings during high-speed metal cutting: An in operando high-energy x-ray diffraction study

Moreno, M., Andersson, J. M., Eriksson, J., Alm, P., Hedström, K., M'Saoubi, R., Schramm, I. C., Schell, N., Johansson-Jöesaar, M. P., Odén, M. & Rogström, L., 2024 jan., I: Acta Materialia. 263, 119538.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management

Bushlya, V., Lindvall, R., Lenrick, F., Magnusson Åberg, L., M'Saoubi, R. & Ståhl, J. E., 2024, I: CIRP Annals. 73, 1, s. 45-48 4 s.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Effect of cooling scheme and coating of drills on hole quality in drilling of Inconel 718

Zhou, J., Frejd, S., Slipchenko, K., Hrechuk, A. & M'Saoubi, R., 2024, Procedia CIRP. Vol. 123. s. 137-142 6 s. (Procedia CIRP).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

ENHANCING DIGITAL TWINS WITH DEEP REINFORCEMENT LEARNING: A USE CASE IN MAINTENANCE PRIORITIZATION

Chen, S., Lopes, P. V., Marti, S., Rajashekarappa, M., Bandaru, S., Windmark, C., Bokrantz, J. & Skoogh, A., 2024, 2024 Winter Simulation Conference, WSC 2024. IEEE - Institute of Electrical and Electronics Engineers Inc., s. 1611-1622 12 s. (Proceedings - Winter Simulation Conference).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Evolution of surface quality in micromilling Ti-6Al-4V alloy with increasing machined length

Gonçalves, M. C. C., Alsters, R., Curtis, D., M'Saoubi, R. & Ghadbeigi, H., 2024, Procedia CIRP. Vol. 123. s. 221-226 6 s. (Procedia CIRP).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Förord till konferenspublikation

Öppen tillgång

In situ imaging of precipitate formation in additively manufactured al-alloys by scanning X-ray fluorescence

Lazar, I., Mehta, B., Bertschová, V., Malladi, S. B. A., Ren, Z., Das, S., Hagemann, J., Falkenberg, G., Frisk, K., Mikkelsen, A. & Nyborg, L., 2024, I: European Journal of Materials. 4, 1, 2328242.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Machinability improvement by in-operando Tool Protection Layers through designed steel alloying: The case of manganese steel

Bjerke, A., Norgren, S., Larsson, H., Markström, A., Lenrick, F., M'Saoubi, R., Petersson, J., Melk, L. & Bushlya, V., 2024, I: Journal of Materials Processing Technology. 330, 118496.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Machining SiC fibre reinforced metal matrix composites – How do different matrix materials affect the cutting performance?

Zan, S., Liao, Z., Mypati, O., Axinte, D., M'Saoubi, R., Walsh, M. & Robles-Linares, J. A., 2024, I: CIRP Annals. 73, 1, s. 53-56

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

On the surface integrity of machined aero-engine grade Ni-based superalloy billets produced by the field-assisted sintering technology (FAST) route

Boyle, H., Marshall, K., Epler, M., Crawforth, P., Christofidou, K., Norgren, S. & Jackson, M., 2024, Procedia CIRP. Vol. 123. s. 310-315 6 s. (Procedia CIRP).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

The effect of workpiece grain size on surface integrity in orthogonal cutting of Inconel 718

Weng, J., Xu, D., Zhou, J., M'Saoubi, R. & Zhuang, K., 2024, Procedia CIRP. Vol. 123. s. 155-160 6 s. (Procedia CIRP).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

The LISA project: opportunities and challenges of recycling automotive heat exchangers

Lattanzi, L., Liljenfors, T., Westergård, R. & Windmark, C., 2024, I: Materiaux et Techniques. 112, 6, 603.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

2023

Perspectives on supervising and conducting interdisciplinary research projects

Bäckström, I., Davidsson, H., Larsson, E., Lenrick, F. & Windmark, C., 2023 dec. 7, LTH:s 12:e Pedagogiska Inspirationskonferens, 7 december 2023. Lund: Lunds Tekniska Högskola (LTH), 3 s. (Proceedings LTH:s Pedagogiska inspirationskonferens).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Öppen tillgång

Fil

60 Nedladdningar (Pure)

Creep of un-doped and Cr-doped WC-Co at high temperature and high load

Yousfi, M. A., Nordgren, A., Norgren, S., Weidow, J., Andrén, H. O. & Falk, L. K. L., 2023 dec., I: International Journal of Refractory Metals and Hard Materials. 117, 106417.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

Öppen tillgång

Polycrystalline cubic boron nitride material

Lindvall, R. (uppfinnare), Can, A. (uppfinnare), M'saoubi, R. (uppfinnare), Lenrick, F. (uppfinnare), Bushlya, V. (uppfinnare) & Ståhl, J.-E. (uppfinnare), 2023 nov. 28, (Accepted/In press) Patentnr. 17791407, 2020 jan. 31

Forskningsoutput: Patent

Industriell Produktion

Forskningsoutput

Sökresultat