Jinming Zhou

Sökresultat

• 2014

  Characterizing the mechanical properties of skin-core structure in polymer molding process by nanoindentation

  Persson, J., Zhou, J. & Ståhl, J.-E., 2014. 9 s.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

  • Mechanical Properties 100%
  • Moulding Process 100%
  • Polymers 100%
  • Nanoindentation 100%
  • Polymer 100%
• 2013

  Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718

  Peng-Lin, R., Zhou, J., Johansson, S., Billenius, A., Bushlya, V. & Ståhl, J.-E., 2013.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel

  Bushlya, V., Gutnichenko, O., Zhou, J., Gunnarsson, S. & Ståhl, J.-E., 2013.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review
• 2012

  Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools

  Bushlya, V., Gutnichenko, O., Zhou, J., Avdovic, P., Turkevych, V. & Ståhl, J.-E., 2012.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• Modelling Subsurface Deformation in High Speed Machining of Inconel 718

  Agmell, M., Zhou, J., Ahadi, A., Bushlya, V., Peng, R. L. & Ståhl, J.-E., 2012. 9 s.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

  • Surface 100%
  • High Speed Machining 100%
  • Inconel 718 100%
  • Machining 50%
  • Finite Element Modeling 25%

• Simulation of indenter geometry effects in nanoindentation

  Chen, L., Ahadi, A. & Zhou, J., 2012, (Submitted). 4 s.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

  • Hardness 100%
  • Nanoindentation 100%
  • Young's Modulus 100%
• 2011

  Modelling tool life in the machining of strain-hardening material - Alloy 718

  Ståhl, J.-E., Avdovic, P., Bushlya, V. & Zhou, J., 2011. 12 s.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

  Fil

  • Models 100%
  • Strain Hardening 100%
  • Nickel Alloys 50%
  • Ceramic Cutting Tools 50%
  • Fiber 20%
  103 Nedladdningar (Pure)

• On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation

  Bushlya, V., Zhou, J. & Ståhl, J.-E., 2011.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line

  Bushlya, V., Zhou, J. & Ståhl, J.-E., 2011.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• On the surface quality of Alloy 718 in finishing turning with CBN cutting tools

  Zhou, J., Bushlya, V., Avdovic, P. & Ståhl, J.-E., 2011.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions

  Zhou, J., Bushlya, V., Ru, P., Avdovic, P. & Ståhl, J.-E., 2011, s. 263-270.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• Study on work-hardening phenomena in machining aged Alloy 718

  Bushlya, V., Zhou, J., Avdovic, P. & Ståhl, J.-E., 2011.

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review
• 2008

  Modeling the cooling effect in compressed air assisted machining

  Tasdelen, B., Walter, H., Zhou, J., Ståhl, J.-E. & Kaminski, J., 2008, (Unpublished).

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review

• Tribological analysis in comparison of dry and air assisted maching

  Tasdelen, B., Zhou, J. & Ståhl, J.-E., 2008, (Unpublished).

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review
• 2007

  Hard milling of abrasion resistance cast iron with pcbn cutting tool

  Zhou, J., Nilsson, A., Krantz, F., Andersson, M. & Ståhl, J.-E., 2007, (Unpublished).

  Forskningsoutput: Konferensbidrag › Konferenspaper, ej i proceeding/ej förlagsutgivet › Peer review