A 5.4GHz 90-nm CMOS digitally controlled LC oscillator with 21% tuning range, 1.1MHz resolution, and 180dB FOM

Forskningsoutput: KonferensbidragKonferenspaper, ej i proceeding/ej förlagsutgivetPeer review

Sammanfattning

A 5.4 GHz digitally controlled oscillator (DCO) has been implemented in a 90-nm CMOS process. It has three different frequency control words, coarse, medium, and fine. The coarse control bank uses MIM capacitors and differential MOS switches. The other banks use MOS varactors. The phase noise was measured at the output of an on-chip divide by 2 circuit. It is -132 dBc/Hz at 3 MHz offset from the 2.7 GHz carrier. The power consumption of the oscillator is 7.8 mW from a 1.2 V supply, resulting in a figure of merit (FOM) of 182 dB. The worst case FOM is 180 dB over the 21% tuning range.
Originalspråkengelska
Antal sidor4
StatusPublished - 2008
EvenemangNorchip Conference, 2008 - Tallinnn, Talinn, Estland
Varaktighet: 2008 nov. 162008 nov. 17

Konferens

KonferensNorchip Conference, 2008
Land/TerritoriumEstland
OrtTalinn
Period2008/11/162008/11/17

Ämnesklassifikation (UKÄ)

  • Elektroteknik och elektronik

Fingeravtryck

Utforska forskningsämnen för ”A 5.4GHz 90-nm CMOS digitally controlled LC oscillator with 21% tuning range, 1.1MHz resolution, and 180dB FOM”. Tillsammans bildar de ett unikt fingeravtryck.

Citera det här