Biased magnetic materials in RAM applications

Jörgen Ramprecht, Daniel Sjöberg

Forskningsoutput: TidskriftsbidragArtikel i vetenskaplig tidskriftPeer review

Sammanfattning

The magnetization of a ferro- or ferri-magnetic material has been modeled with the Landau-Lifshitz-Gilbert (LLG) equation. In this
model demagnetization effects are included. By applying a linearized
small signal model of the LLG equation, it was found that the material
can be described by an effective permeability and with the aid of a
static external biasing field, the material can be switched between a
Lorentz-like material and a material that exhibits a magnetic
conductivity. Furthermore, the reflection coefficient for normally
impinging waves on a PEC covered with a ferro/ferri- magnetic
material, biased in the normal direction, is calculated. When the
material is switched into the resonance mode, two distinct resonance
frequencies in the reflection coefficient were found, one associated
with the precession frequency of the magnetization and the other
associated with the thickness of the layer. The former of these
resonance frequencies can be controlled by the bias field and for a
bias field strength close to the saturation magnetization, where the
material starts to exhibit a magnetic conductivity, low reflection
(around -20 dB) for a quite large bandwidth (more than two decades)
can be achieved.
Originalspråkengelska
Sidor (från-till)85-117
TidskriftProgress in Electromagnetics Research PIER
Volym75
DOI
StatusPublished - 2007

Ämnesklassifikation (UKÄ)

  • Elektroteknik och elektronik

Fingeravtryck

Utforska forskningsämnen för ”Biased magnetic materials in RAM applications”. Tillsammans bildar de ett unikt fingeravtryck.

Citera det här