Emittance improvements in the MAX IV photocathode injector

J Andersson; F Curbis; M Kotur; F Lindau; S Thorin; S Werin

doi:10.18429/JACoW-IPAC2017-TUPAB094

Emittance improvements in the MAX IV photocathode injector

J Andersson, F Curbis, M Kotur, F Lindau, S Thorin, S Werin

MAX IV-laboratoriet

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding

Sammanfattning

The MAX IV injector design predicts a beam with 100 pC of charge and an emittance lower than 1 mm mrad. The photocathode pre-injector is based on the now close to standard 1.6-cell gun adapted to 2.9985 GHz, in combination with a Ti:Sapphire laser system. This system reaches the requirements of the injector operation for the SPF, but can be tuned beyond specifications to open up new operation modes. During 2016 and 2017 several aspects where investigated to improve the emittance from the current gun, the goal was to meet the SPF specifications. In this paper we report on the progress, discuss the steps taken leading to a final emittance of 1 mm mrad and beyond.

Originalspråk	engelska
Titel på värdpublikation	IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference
Utgivningsort	Copenhagen
Förlag	JACoW Publishing
Sidor	1533-1536
Antal sidor	4
ISBN (elektroniskt)	9783954501823
ISBN (tryckt)	9783954501823
DOI	https://doi.org/10.18429/JACoW-IPAC2017-TUPAB094
Status	Published - 2017
Evenemang	8th International Particle Accelerator Conference, IPAC 2017 - Bella Center, Bella Conference Center, Danmark Varaktighet: 2017 maj 14 → 2017 maj 19

Konferens

Konferens	8th International Particle Accelerator Conference, IPAC 2017
Land/Territorium	Danmark
Ort	Bella Conference Center
Period	2017/05/14 → 2017/05/19

Ämnesklassifikation (UKÄ)

Acceleratorfysik och instrumentering

Tillgång till dokument

10.18429/JACoW-IPAC2017-TUPAB094Licens: CC BY

Citera det här

@inproceedings{a46bbd0d42d140758ac8be1c93817af4,

title = "Emittance improvements in the MAX IV photocathode injector",

abstract = "The MAX IV injector design predicts a beam with 100 pC of charge and an emittance lower than 1 mm mrad. The photocathode pre-injector is based on the now close to standard 1.6-cell gun adapted to 2.9985 GHz, in combination with a Ti:Sapphire laser system. This system reaches the requirements of the injector operation for the SPF, but can be tuned beyond specifications to open up new operation modes. During 2016 and 2017 several aspects where investigated to improve the emittance from the current gun, the goal was to meet the SPF specifications. In this paper we report on the progress, discuss the steps taken leading to a final emittance of 1 mm mrad and beyond.",

author = "J Andersson and F Curbis and M Kotur and F Lindau and S Thorin and S Werin",

year = "2017",

doi = "10.18429/JACoW-IPAC2017-TUPAB094",

language = "English",

isbn = "9783954501823",

pages = "1533--1536",

booktitle = "IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference",

publisher = "JACoW Publishing",

note = "8th International Particle Accelerator Conference, IPAC 2017 ; Conference date: 14-05-2017 Through 19-05-2017",

}

Andersson, J, Curbis, F, Kotur, M, Lindau, F, Thorin, S & Werin, S 2017, Emittance improvements in the MAX IV photocathode injector. i IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. JACoW Publishing, Copenhagen, s. 1533-1536, 8th International Particle Accelerator Conference, IPAC 2017, Bella Conference Center, Danmark, 2017/05/14. https://doi.org/10.18429/JACoW-IPAC2017-TUPAB094

TY - GEN

T1 - Emittance improvements in the MAX IV photocathode injector

AU - Andersson, J

AU - Curbis, F

AU - Kotur, M

AU - Lindau, F

AU - Thorin, S

AU - Werin, S

PY - 2017

Y1 - 2017

N2 - The MAX IV injector design predicts a beam with 100 pC of charge and an emittance lower than 1 mm mrad. The photocathode pre-injector is based on the now close to standard 1.6-cell gun adapted to 2.9985 GHz, in combination with a Ti:Sapphire laser system. This system reaches the requirements of the injector operation for the SPF, but can be tuned beyond specifications to open up new operation modes. During 2016 and 2017 several aspects where investigated to improve the emittance from the current gun, the goal was to meet the SPF specifications. In this paper we report on the progress, discuss the steps taken leading to a final emittance of 1 mm mrad and beyond.

AB - The MAX IV injector design predicts a beam with 100 pC of charge and an emittance lower than 1 mm mrad. The photocathode pre-injector is based on the now close to standard 1.6-cell gun adapted to 2.9985 GHz, in combination with a Ti:Sapphire laser system. This system reaches the requirements of the injector operation for the SPF, but can be tuned beyond specifications to open up new operation modes. During 2016 and 2017 several aspects where investigated to improve the emittance from the current gun, the goal was to meet the SPF specifications. In this paper we report on the progress, discuss the steps taken leading to a final emittance of 1 mm mrad and beyond.

U2 - 10.18429/JACoW-IPAC2017-TUPAB094

DO - 10.18429/JACoW-IPAC2017-TUPAB094

M3 - Paper in conference proceeding

SN - 9783954501823

SP - 1533

EP - 1536

BT - IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference

PB - JACoW Publishing

CY - Copenhagen

T2 - 8th International Particle Accelerator Conference, IPAC 2017

Y2 - 14 May 2017 through 19 May 2017

ER -

Emittance improvements in the MAX IV photocathode injector

Sammanfattning

Konferens

Ämnesklassifikation (UKÄ)

Tillgång till dokument

Fingeravtryck

Citera det här