Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Oleksandr Gutnichenko; Volodymyr Bushlya; Sverker Bihagen; Jan Eric Ståhl

doi:10.1016/j.procir.2018.08.281

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan Eric Ståhl

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

8 Citeringar (SciVal)

108 Nedladdningar (Pure)

Sammanfattning

The current study demonstrates through experiment, the effect of solid lubricant assisted minimum quantity cooling lubrication (MQCL) when turning tempered (~60 HRC) alloyed steel Uddeholm Caldie with cemented carbide tools on the process performance. In MQCL application, nanosized graphite nanoplatelets (GnP) solid lubricant powder was dispersed (0.2% vol.) in rapeseed oil based lubricant “ECOLUBRIC”. The effect of cutting parameters at dry machining and with MQCL lubrication on the machined surface finish, tool forces, tool wear and vibrations generated were studied.

Originalspråk	engelska
Titel på värdpublikation	8th CIRP Conference on High Performance Cutting
Förlag	Elsevier
Sidor	437-440
Antal sidor	4
Volym	77
DOI	https://doi.org/10.1016/j.procir.2018.08.281
Status	Published - 2018
Evenemang	8th CIRP Conference on High Performance Cutting, HPC 2018 - Budapest, Ungern Varaktighet: 2018 juni 25 → 2018 juni 27

Publikationsserier

Namn	Procedia CIRP
Förlag	Elsevier
ISSN (tryckt)	2212-8271

Konferens

Konferens	8th CIRP Conference on High Performance Cutting, HPC 2018
Land/Territorium	Ungern
Ort	Budapest
Period	2018/06/25 → 2018/06/27

Ämnesklassifikation (UKÄ)

Tribologi

Tillgång till dokument

10.1016/j.procir.2018.08.281Licens: CC BY-NC-ND

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning submitted manuscriptInskickat manuskript, 2,28 MB

1 Avslutade

Flintstone2020
Ståhl, J., Bushlya, V., Johansson, D., Windmark, C., Lenrick, F., Ahadi, A., Agmell, M., Hörndahl, M. & Gutnichenko, O.
European Commission - Horizon 2020
2017/09/01 → 2019/12/31
Projekt: Forskning

Citera det här

@inproceedings{aee6f2fc908a425b8a0af251fb585a7f,

title = "Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning",

abstract = "The current study demonstrates through experiment, the effect of solid lubricant assisted minimum quantity cooling lubrication (MQCL) when turning tempered (~60 HRC) alloyed steel Uddeholm Caldie with cemented carbide tools on the process performance. In MQCL application, nanosized graphite nanoplatelets (GnP) solid lubricant powder was dispersed (0.2% vol.) in rapeseed oil based lubricant “ECOLUBRIC”. The effect of cutting parameters at dry machining and with MQCL lubrication on the machined surface finish, tool forces, tool wear and vibrations generated were studied.",

keywords = "Graphite nanoplatelets (GnP), Hard turning, Modified vegetable oil, MQCL, Surface finish, Tool wear, Uddeholm Caldie, Vibrations",

author = "Oleksandr Gutnichenko and Volodymyr Bushlya and Sverker Bihagen and St{\aa}hl, {Jan Eric}",

year = "2018",

doi = "10.1016/j.procir.2018.08.281",

language = "English",

volume = "77",

series = "Procedia CIRP",

publisher = "Elsevier",

pages = "437--440",

booktitle = "8th CIRP Conference on High Performance Cutting",

address = "United States",

note = "8th CIRP Conference on High Performance Cutting, HPC 2018 ; Conference date: 25-06-2018 Through 27-06-2018",

}

Gutnichenko, O , Bushlya, V, Bihagen, S & Ståhl, JE 2018, Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning. i 8th CIRP Conference on High Performance Cutting. vol. 77, Procedia CIRP, Elsevier, s. 437-440, 8th CIRP Conference on High Performance Cutting, HPC 2018, Budapest, Ungern, 2018/06/25. https://doi.org/10.1016/j.procir.2018.08.281

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning. / Gutnichenko, Oleksandr ; Bushlya, Volodymyr; Bihagen, Sverker; Ståhl, Jan Eric.

8th CIRP Conference on High Performance Cutting. Vol. 77 Elsevier, 2018. s. 437-440 (Procedia CIRP).

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

TY - GEN

T1 - Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

AU - Gutnichenko, Oleksandr

AU - Bushlya, Volodymyr

AU - Bihagen, Sverker

AU - Ståhl, Jan Eric

PY - 2018

Y1 - 2018

N2 - The current study demonstrates through experiment, the effect of solid lubricant assisted minimum quantity cooling lubrication (MQCL) when turning tempered (~60 HRC) alloyed steel Uddeholm Caldie with cemented carbide tools on the process performance. In MQCL application, nanosized graphite nanoplatelets (GnP) solid lubricant powder was dispersed (0.2% vol.) in rapeseed oil based lubricant “ECOLUBRIC”. The effect of cutting parameters at dry machining and with MQCL lubrication on the machined surface finish, tool forces, tool wear and vibrations generated were studied.

AB - The current study demonstrates through experiment, the effect of solid lubricant assisted minimum quantity cooling lubrication (MQCL) when turning tempered (~60 HRC) alloyed steel Uddeholm Caldie with cemented carbide tools on the process performance. In MQCL application, nanosized graphite nanoplatelets (GnP) solid lubricant powder was dispersed (0.2% vol.) in rapeseed oil based lubricant “ECOLUBRIC”. The effect of cutting parameters at dry machining and with MQCL lubrication on the machined surface finish, tool forces, tool wear and vibrations generated were studied.

KW - Graphite nanoplatelets (GnP)

KW - Hard turning

KW - Modified vegetable oil

KW - MQCL

KW - Surface finish

KW - Tool wear

KW - Uddeholm Caldie

KW - Vibrations

U2 - 10.1016/j.procir.2018.08.281

DO - 10.1016/j.procir.2018.08.281

M3 - Paper in conference proceeding

AN - SCOPUS:85057393985

VL - 77

T3 - Procedia CIRP

SP - 437

EP - 440

BT - 8th CIRP Conference on High Performance Cutting

PB - Elsevier

T2 - 8th CIRP Conference on High Performance Cutting, HPC 2018

Y2 - 25 June 2018 through 27 June 2018

ER -

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Sammanfattning

Publikationsserier

Konferens

Ämnesklassifikation (UKÄ)

Tillgång till dokument

Fingeravtryck

Projekt

Flintstone2020

Citera det här