Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity

Mike Olsson; Anders Andersson; Fredrik Schultheiss; Volodymyr Bushlya; Jan-Eric Ståhl

Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity

Mike Olsson, Anders Andersson, Fredrik Schultheiss, Volodymyr Bushlya, Jan-Eric Ståhl

Industriell Produktion

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Sammanfattning

The focus of this article has been to analyse the machinability, with focus on surface integrity, of oxygen-free copper (OFC) and niobium during turning operations. The results from machining OFC proved that all of the tools that was tested can be used to achieve a surface roughness below Ra = 0.8 µm with the correct cutting data. From the results when machining niobium it showed that only the cemented carbide tool with a nose radius of 1.2 mm was able to achieve a surface roughness of Ra = 0.8 µm or greater. The cutting resistance based on the measured cutting forces was high for both of the materials.

Originalspråk	engelska
Titel på värdpublikation	Proceedings of the 6th Swedish Production Symposium
Förlag	The Swedish Production Academy
Status	Published - 2014
Evenemang	Swedish Production Symposium, 2014 - Gothenburg, Gothenburg, Sverige Varaktighet: 2014 sep. 16 → 2014 sep. 18 Konferensnummer: 6

Konferens

Konferens	Swedish Production Symposium, 2014
Förkortad titel	SPS
Land/Territorium	Sverige
Ort	Gothenburg
Period	2014/09/16 → 2014/09/18

Ämnesklassifikation (UKÄ)

Teknik

Citera det här

@inproceedings{58480ed0fc8d42babd40b04d39d92e6a,

title = "Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity",

abstract = "The focus of this article has been to analyse the machinability, with focus on surface integrity, of oxygen-free copper (OFC) and niobium during turning operations. The results from machining OFC proved that all of the tools that was tested can be used to achieve a surface roughness below Ra = 0.8 µm with the correct cutting data. From the results when machining niobium it showed that only the cemented carbide tool with a nose radius of 1.2 mm was able to achieve a surface roughness of Ra = 0.8 µm or greater. The cutting resistance based on the measured cutting forces was high for both of the materials.",

keywords = "Oxygen-free copper, niobium, metal cutting",

author = "Mike Olsson and Anders Andersson and Fredrik Schultheiss and Volodymyr Bushlya and Jan-Eric St{\aa}hl",

year = "2014",

language = "English",

booktitle = "Proceedings of the 6th Swedish Production Symposium",

publisher = "The Swedish Production Academy",

note = "Swedish Production Symposium, 2014, SPS ; Conference date: 16-09-2014 Through 18-09-2014",

}

Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity. / Olsson, Mike; Andersson, Anders; Schultheiss, Fredrik et al.
Proceedings of the 6th Swedish Production Symposium. The Swedish Production Academy, 2014.

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

TY - GEN

T1 - Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity

AU - Olsson, Mike

AU - Andersson, Anders

AU - Schultheiss, Fredrik

AU - Bushlya, Volodymyr

AU - Ståhl, Jan-Eric

N1 - Conference code: 6

PY - 2014

Y1 - 2014

N2 - The focus of this article has been to analyse the machinability, with focus on surface integrity, of oxygen-free copper (OFC) and niobium during turning operations. The results from machining OFC proved that all of the tools that was tested can be used to achieve a surface roughness below Ra = 0.8 µm with the correct cutting data. From the results when machining niobium it showed that only the cemented carbide tool with a nose radius of 1.2 mm was able to achieve a surface roughness of Ra = 0.8 µm or greater. The cutting resistance based on the measured cutting forces was high for both of the materials.

AB - The focus of this article has been to analyse the machinability, with focus on surface integrity, of oxygen-free copper (OFC) and niobium during turning operations. The results from machining OFC proved that all of the tools that was tested can be used to achieve a surface roughness below Ra = 0.8 µm with the correct cutting data. From the results when machining niobium it showed that only the cemented carbide tool with a nose radius of 1.2 mm was able to achieve a surface roughness of Ra = 0.8 µm or greater. The cutting resistance based on the measured cutting forces was high for both of the materials.

KW - Oxygen-free copper

KW - niobium

KW - metal cutting

M3 - Paper in conference proceeding

BT - Proceedings of the 6th Swedish Production Symposium

PB - The Swedish Production Academy

T2 - Swedish Production Symposium, 2014

Y2 - 16 September 2014 through 18 September 2014

ER -

Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity

Sammanfattning

Konferens

Ämnesklassifikation (UKÄ)

Fingeravtryck

Citera det här