Next Generation Digital Front-End for Multi-Standard Concurrent Reception

Isael Diaz; Chenxin Zhang; Lieven Hollevoet; Jim Svensson; Joachim Rodrigues; Leif Wilhelmsson; Thomas Olssson; Liesbet Van der Perre; Viktor Öwall

doi:10.1109/NORCHIP.2013.6702041

Next Generation Digital Front-End for Multi-Standard Concurrent Reception

Isael Diaz, Chenxin Zhang, Lieven Hollevoet, Jim Svensson, Joachim Rodrigues, Leif Wilhelmsson, Thomas Olssson, Liesbet Van der Perre, Viktor Öwall

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

Sammanfattning

This article presents an architecture of a Digital Front-End Receiver (DFE-Rx) for the next-generation mobile terminals. A main focus is placed in flexibility, scalability and concurrency. The architecture is capable of detecting, synchronizing and reporting carrier-frequency offset, of multiple concurrent radio standards. The proposed receiver is fabricated in a 65nm CMOS low power high-VT cell technology in a die size of 5mm2. The synchronization engine has been measured at 1.2V and reports an average power consumption of 1.9mW during IEEE 802.11 reception and 1.6mW during configuration, while running at 10MHz.

Originalspråk	engelska
Titel på värdpublikation	[Host publication title missing]
Förlag	IEEE - Institute of Electrical and Electronics Engineers Inc.
Antal sidor	6
DOI	https://doi.org/10.1109/NORCHIP.2013.6702041
Status	Published - 2013
Evenemang	NORCHIP Conference, 2013 - Vilnius, Litauen Varaktighet: 2013 nov. 11 → 2013 nov. 12

Konferens

Konferens	NORCHIP Conference, 2013
Land/Territorium	Litauen
Ort	Vilnius
Period	2013/11/11 → 2013/11/12

Ämnesklassifikation (UKÄ)

Elektroteknik och elektronik

Tillgång till dokument

10.1109/NORCHIP.2013.6702041

Citera det här

@inproceedings{7f521d7e2c5248538630fa3622b5261c,

title = "Next Generation Digital Front-End for Multi-Standard Concurrent Reception",

abstract = "This article presents an architecture of a Digital Front-End Receiver (DFE-Rx) for the next-generation mobile terminals. A main focus is placed in flexibility, scalability and concurrency. The architecture is capable of detecting, synchronizing and reporting carrier-frequency offset, of multiple concurrent radio standards. The proposed receiver is fabricated in a 65nm CMOS low power high-VT cell technology in a die size of 5mm2. The synchronization engine has been measured at 1.2V and reports an average power consumption of 1.9mW during IEEE 802.11 reception and 1.6mW during configuration, while running at 10MHz.",

keywords = "Multi-standard, DFE, concurrency, wireless, LTE, DVB-H, WLAN, connectivity, mobile-terminal.",

author = "Isael Diaz and Chenxin Zhang and Lieven Hollevoet and Jim Svensson and Joachim Rodrigues and Leif Wilhelmsson and Thomas Olssson and {Van der Perre}, Liesbet and Viktor {\"O}wall",

year = "2013",

doi = "10.1109/NORCHIP.2013.6702041",

language = "English",

booktitle = "[Host publication title missing]",

publisher = "IEEE - Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "NORCHIP Conference, 2013 ; Conference date: 11-11-2013 Through 12-11-2013",

}

Diaz, I, Zhang, C, Hollevoet, L, Svensson, J, Rodrigues, J, Wilhelmsson, L, Olssson, T, Van der Perre, L & Öwall, V 2013, Next Generation Digital Front-End for Multi-Standard Concurrent Reception. i [Host publication title missing]. IEEE - Institute of Electrical and Electronics Engineers Inc., NORCHIP Conference, 2013, Vilnius, Litauen, 2013/11/11. https://doi.org/10.1109/NORCHIP.2013.6702041

TY - GEN

T1 - Next Generation Digital Front-End for Multi-Standard Concurrent Reception

AU - Diaz, Isael

AU - Zhang, Chenxin

AU - Hollevoet, Lieven

AU - Svensson, Jim

AU - Rodrigues, Joachim

AU - Wilhelmsson, Leif

AU - Olssson, Thomas

AU - Van der Perre, Liesbet

AU - Öwall, Viktor

PY - 2013

Y1 - 2013

N2 - This article presents an architecture of a Digital Front-End Receiver (DFE-Rx) for the next-generation mobile terminals. A main focus is placed in flexibility, scalability and concurrency. The architecture is capable of detecting, synchronizing and reporting carrier-frequency offset, of multiple concurrent radio standards. The proposed receiver is fabricated in a 65nm CMOS low power high-VT cell technology in a die size of 5mm2. The synchronization engine has been measured at 1.2V and reports an average power consumption of 1.9mW during IEEE 802.11 reception and 1.6mW during configuration, while running at 10MHz.

AB - This article presents an architecture of a Digital Front-End Receiver (DFE-Rx) for the next-generation mobile terminals. A main focus is placed in flexibility, scalability and concurrency. The architecture is capable of detecting, synchronizing and reporting carrier-frequency offset, of multiple concurrent radio standards. The proposed receiver is fabricated in a 65nm CMOS low power high-VT cell technology in a die size of 5mm2. The synchronization engine has been measured at 1.2V and reports an average power consumption of 1.9mW during IEEE 802.11 reception and 1.6mW during configuration, while running at 10MHz.

KW - Multi-standard

KW - DFE

KW - concurrency

KW - wireless

KW - LTE

KW - DVB-H

KW - WLAN

KW - connectivity

KW - mobile-terminal.

U2 - 10.1109/NORCHIP.2013.6702041

DO - 10.1109/NORCHIP.2013.6702041

M3 - Paper in conference proceeding

BT - [Host publication title missing]

PB - IEEE - Institute of Electrical and Electronics Engineers Inc.

T2 - NORCHIP Conference, 2013

Y2 - 11 November 2013 through 12 November 2013

ER -

Next Generation Digital Front-End for Multi-Standard Concurrent Reception

Sammanfattning

Konferens

Ämnesklassifikation (UKÄ)

Tillgång till dokument

Fingeravtryck

Citera det här