The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use

Per Persson; Ragnar Hellborg; Madis Kiisk; G Skog; Kristina Stenström

doi:10.1016/S0168-9002(02)02073-9

The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use

Per Persson, Ragnar Hellborg, Madis Kiisk, G Skog, Kristina Stenström

Kärnfysik

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

3 Citeringar (SciVal)

Sammanfattning

Terminal pumping has recently been installed in the Lund tandem Pelletron electrostatic accelerator. The equipment allows a higher gas density in the stripper and an improved vacuum in the accelerator tubes compared to the former system. This improvement has led to an increased beam transmission and to superior measurements for our accelerator mass spectrometry programme. The pressure profile of the stripper system as well as of the accelerator tubes has been calculated using kinetic gas theory. The result will be used to identify possible technical improvements in the future. (C) 2002 Published by Elsevier Science B.V.

Originalspråk	engelska
Sidor (från-till)	55-61
Tidskrift	Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment
Volym	500
Utgåva	1-3
DOI	https://doi.org/10.1016/S0168-9002(02)02073-9
Status	Published - 2003

Ämnesklassifikation (UKÄ)

Acceleratorfysik och instrumentering

Tillgång till dokument

10.1016/S0168-9002(02)02073-9

Citera det här

@article{a2f370b56ca447c4bc60f945d9f1e70b,

title = "The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use",

abstract = "Terminal pumping has recently been installed in the Lund tandem Pelletron electrostatic accelerator. The equipment allows a higher gas density in the stripper and an improved vacuum in the accelerator tubes compared to the former system. This improvement has led to an increased beam transmission and to superior measurements for our accelerator mass spectrometry programme. The pressure profile of the stripper system as well as of the accelerator tubes has been calculated using kinetic gas theory. The result will be used to identify possible technical improvements in the future. (C) 2002 Published by Elsevier Science B.V.",

keywords = "terminal pumping, tandem accelerator, pressure profile",

author = "Per Persson and Ragnar Hellborg and Madis Kiisk and G Skog and Kristina Stenstr{\"o}m",

year = "2003",

doi = "10.1016/S0168-9002(02)02073-9",

language = "English",

volume = "500",

pages = "55--61",

journal = "Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment",

issn = "0168-9002",

publisher = "Elsevier",

number = "1-3",

}

Persson, P, Hellborg, R, Kiisk, M, Skog, G & Stenström, K 2003, 'The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use', Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, vol. 500, nr. 1-3, s. 55-61. https://doi.org/10.1016/S0168-9002(02)02073-9

The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use. / Persson, Per; Hellborg, Ragnar; Kiisk, Madis; Skog, G; Stenström, Kristina.

I: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, Vol. 500, Nr. 1-3, 2003, s. 55-61.

Forskningsoutput: Tidskriftsbidrag › Artikel i vetenskaplig tidskrift › Peer review

TY - JOUR

T1 - The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use

AU - Persson, Per

AU - Hellborg, Ragnar

AU - Kiisk, Madis

AU - Skog, G

AU - Stenström, Kristina

PY - 2003

Y1 - 2003

N2 - Terminal pumping has recently been installed in the Lund tandem Pelletron electrostatic accelerator. The equipment allows a higher gas density in the stripper and an improved vacuum in the accelerator tubes compared to the former system. This improvement has led to an increased beam transmission and to superior measurements for our accelerator mass spectrometry programme. The pressure profile of the stripper system as well as of the accelerator tubes has been calculated using kinetic gas theory. The result will be used to identify possible technical improvements in the future. (C) 2002 Published by Elsevier Science B.V.

AB - Terminal pumping has recently been installed in the Lund tandem Pelletron electrostatic accelerator. The equipment allows a higher gas density in the stripper and an improved vacuum in the accelerator tubes compared to the former system. This improvement has led to an increased beam transmission and to superior measurements for our accelerator mass spectrometry programme. The pressure profile of the stripper system as well as of the accelerator tubes has been calculated using kinetic gas theory. The result will be used to identify possible technical improvements in the future. (C) 2002 Published by Elsevier Science B.V.

KW - terminal pumping

KW - tandem accelerator

KW - pressure profile

U2 - 10.1016/S0168-9002(02)02073-9

DO - 10.1016/S0168-9002(02)02073-9

M3 - Article

VL - 500

SP - 55

EP - 61

JO - Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment

JF - Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment

SN - 0168-9002

IS - 1-3

ER -

The pressure profile in the Lund Pelletron accelerator with the newly installed terminal pumping in use

Sammanfattning

Ämnesklassifikation (UKÄ)

Tillgång till dokument

Fingeravtryck

Citera det här