Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted

Leif Siesing; Avo Reinap; Mats Andersson

doi:10.1109/ICELMACH.2014.6960492

Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted

Leif Siesing, Avo Reinap, Mats Andersson

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

3150 Nedladdningar (Pure)

Sammanfattning

This paper presents a comparison of the
thermal properties between infiltrated and non-infiltrated
copper windings. The focus is on thermal conductivity in the
radial direction on the winding. The samples have a fill factor
above 65 % due to the manufacturing method of the samples.
Samples are produced and measured with the transient plane
source technique and then compared to FEM simulations and
the Hashin and Shtrikman approximation. The results show a
considerable difference between a non-infiltrated and an
infiltrated winding, as well as a good agreement between
measurements, FEM simulations and the Hashin and
Shtrikman approximation

Originalspråk	engelska
Titel på värdpublikation	2014 International Conference on Electrical Machines (ICEM)
Förlag	IEEE - Institute of Electrical and Electronics Engineers Inc.
Sidor	2218-2223
Antal sidor	6
ISBN (tryckt)	9781479943883
DOI	https://doi.org/10.1109/ICELMACH.2014.6960492
Status	Published - 2014
Evenemang	International Conference on Electrical Machines (ICEM), 2014 - Berlin, Berlin, Tyskland Varaktighet: 2014 sep. 2 → 2014 sep. 5

Konferens

Konferens	International Conference on Electrical Machines (ICEM), 2014
Land/Territorium	Tyskland
Ort	Berlin
Period	2014/09/02 → 2014/09/05

Ämnesklassifikation (UKÄ)

Materialteknik

Tillgång till dokument

10.1109/ICELMACH.2014.6960492

Thermal_properties_on_high_fill_factor_electrical_windings__Infiltrated_vs_non_infiltrated

1 Doktorsavhandling (sammanläggning)

Development and Implementation of a Mouldable Soft Magnetic Composite
Siesing, L., 2016 nov. 11, Lund: Department of Mechanical Engineering, Lund University. 87 s.
Forskningsoutput: Avhandling › Doktorsavhandling (sammanläggning)

Öppen tillgång
Fil

Citera det här

@inproceedings{825ad1e1c2fa4298947e42a84082fbbd,

title = "Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted",

abstract = "This paper presents a comparison of the thermal properties between infiltrated and non-infiltrated copper windings. The focus is on thermal conductivity in the radial direction on the winding. The samples have a fill factor above 65 % due to the manufacturing method of the samples. Samples are produced and measured with the transient plane source technique and then compared to FEM simulations and the Hashin and Shtrikman approximation. The results show a considerable difference between a non-infiltrated and an infiltrated winding, as well as a good agreement between measurements, FEM simulations and the Hashin and Shtrikman approximation",

keywords = "Thermal analysis, Thermal conductivity, Coils, Winding, Fill factor, Infiltrated, Non-infiltrated",

author = "Leif Siesing and Avo Reinap and Mats Andersson",

year = "2014",

doi = "10.1109/ICELMACH.2014.6960492",

language = "English",

isbn = "9781479943883",

pages = "2218--2223",

booktitle = "2014 International Conference on Electrical Machines (ICEM)",

publisher = "IEEE - Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "International Conference on Electrical Machines (ICEM), 2014 ; Conference date: 02-09-2014 Through 05-09-2014",

}

Siesing, L, Reinap, A & Andersson, M 2014, Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted. i 2014 International Conference on Electrical Machines (ICEM). IEEE - Institute of Electrical and Electronics Engineers Inc., s. 2218-2223, International Conference on Electrical Machines (ICEM), 2014, Berlin, Tyskland, 2014/09/02. https://doi.org/10.1109/ICELMACH.2014.6960492

Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted. / Siesing, Leif; Reinap, Avo ; Andersson, Mats.
2014 International Conference on Electrical Machines (ICEM). IEEE - Institute of Electrical and Electronics Engineers Inc., 2014. s. 2218-2223.

Forskningsoutput: Kapitel i bok/rapport/Conference proceeding › Konferenspaper i proceeding › Peer review

TY - GEN

T1 - Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted

AU - Siesing, Leif

AU - Reinap, Avo

AU - Andersson, Mats

PY - 2014

Y1 - 2014

N2 - This paper presents a comparison of the thermal properties between infiltrated and non-infiltrated copper windings. The focus is on thermal conductivity in the radial direction on the winding. The samples have a fill factor above 65 % due to the manufacturing method of the samples. Samples are produced and measured with the transient plane source technique and then compared to FEM simulations and the Hashin and Shtrikman approximation. The results show a considerable difference between a non-infiltrated and an infiltrated winding, as well as a good agreement between measurements, FEM simulations and the Hashin and Shtrikman approximation

AB - This paper presents a comparison of the thermal properties between infiltrated and non-infiltrated copper windings. The focus is on thermal conductivity in the radial direction on the winding. The samples have a fill factor above 65 % due to the manufacturing method of the samples. Samples are produced and measured with the transient plane source technique and then compared to FEM simulations and the Hashin and Shtrikman approximation. The results show a considerable difference between a non-infiltrated and an infiltrated winding, as well as a good agreement between measurements, FEM simulations and the Hashin and Shtrikman approximation

KW - Thermal analysis

KW - Thermal conductivity

KW - Coils

KW - Winding

KW - Fill factor

KW - Infiltrated

KW - Non-infiltrated

U2 - 10.1109/ICELMACH.2014.6960492

DO - 10.1109/ICELMACH.2014.6960492

M3 - Paper in conference proceeding

SN - 9781479943883

SP - 2218

EP - 2223

BT - 2014 International Conference on Electrical Machines (ICEM)

PB - IEEE - Institute of Electrical and Electronics Engineers Inc.

T2 - International Conference on Electrical Machines (ICEM), 2014

Y2 - 2 September 2014 through 5 September 2014

ER -

Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted

Sammanfattning

Konferens

Ämnesklassifikation (UKÄ)

Tillgång till dokument

Fingeravtryck

Forskningsoutput

Development and Implementation of a Mouldable Soft Magnetic Composite

Citera det här