Topics in Machining with Industrial Robot Manipulators and Optimal Motion Control

Forskningsoutput: AvhandlingDoktorsavhandling (monografi)

1206 Nedladdningar (Pure)

Sammanfattning

Two main topics are considered in this thesis: Machining with industrial robot manipulators and optimal motion control of robots and vehicles. The motivation for research on the first subject is the need for flexible and accurate production processes employing industrial robots as their main component. The challenge to overcome here is to achieve high-accuracy machining solutions, in spite of the strong process forces required for the task. Because of the process forces, the nonlinear dynamics of the manipulator, such as the joint compliance and backlash, may significantly degrade the achieved machining accuracy of the manufactured part. In this thesis, a macro/micro-manipulator configuration is considered to the purpose of increasing the milling accuracy. In particular, a model-based control architecture is developed for control of the macro/micro-manipulator setup. The considered approach is validated by experimental results from extensive milling experiments in aluminium and steel. Related to the problem of high-accuracy milling is the topic of robot modeling. To this purpose, two different approaches are considered; modeling of the quasi-static joint dynamics and dynamic compliance modeling. The first problem is approached by an identification method for determining the joint stiffness and backlash. The second problem is approached by using gray-box identification based on subspace-identification methods. Both identification algorithms are evaluated experimentally. Finally, online state estimation is considered as a means to determine the workspace position and orientation of the robot tool. Kalman Filters and Rao-Blackwellized Particle Filters are employed to the purpose of sensor fusion of internal robot measurements and measurements from an inertial measurement unit for estimation of the desired states. The approaches considered are fully implemented and evaluated on experimental data.

The second part of the thesis discusses optimal motion control applied to robot manipulators and road vehicles. A control architecture for online control of a robot manipulator in high-performance path tracking is developed, and the architecture is evaluated in extensive simulations. The main characteristic of the control strategy is that it combines coordinated feedback control along both the tangential and transversal directions of the path; this separation is achieved in the framework of natural coordinates. One motivation for research on optimal control of road vehicles in time-critical maneuvers is the desire to develop improved vehicle-safety systems. In this thesis, a method for solving optimal maneuvering problems using nonlinear optimization is discussed. More specifically, vehicle and tire modeling and the optimization formulations required to get useful solutions to these problems are investigated. The considered method is evaluated on different combinations of chassis and tire models, in maneuvers under different road conditions, and for investigation of optimal maneuvers in systems for electronic stability control. The obtained optimization results in simulations are evaluated and compared.
Originalspråkengelska
KvalifikationDoktor
Tilldelande institution
  • Institutionen för reglerteknik
Handledare
  • Robertsson, Anders, handledare
  • Johansson, Rolf, handledare
Tilldelningsdatum2015 sep. 25
Förlag
ISBN (tryckt)978-91-7623-434-1
ISBN (elektroniskt)978-91-7623-435-8
StatusPublished - 2015

Bibliografisk information

Defence details

Date: 2015-09-25
Time: 10:15
Place: Lecture hall M:B, M-building, Ole Römers väg 1, Lund University Faculty of Engineering

External reviewer(s)

Name: Egeland, Olav
Title: [unknown]
Affiliation: Norwegian University of Science and Technology (NTNU), Trondheim, Norway

---

Ämnesklassifikation (UKÄ)

  • Robotteknik och automation
  • Reglerteknik

Citera det här